Samsung dryer selector board/knob ua-cam.com/video/zgSA-RCn70U/v-deo.html Help support us by buying Merch! teespring.com/stores/diy-raptor-club Visit our Amazon affiliate Store www.amazon.com/shop/diywithmichaelborders?ref=inf_own_diywithmichaelborders
Hi Michael, great video. Question, on the selector knob, is there an indicator mark on it so when You turn the knob the indicator points at the printed cycles on the panel, or do You just turn the knob and look at the digital screen to select?
Bill, thanks for the video. I have a question about the voltages. When I checked the connections of the cord at the dryer. I got 114v on one side and 117v on the other side. On the 240 v side it varied between 235 and 245v. I did check the cord for continuity and it was fine. Is the less than 120v significant enough to cause dryer not to turn on at all? I get no lights on control panel at all. Once again thanks for detailed video. My multi meter broke at some point ,so I could not get readings at the outlet or breaker. Thanks, Fred
I’m having a issue the dryer is not powering on it was running fine earlier in the day went out a few hours latter to do a bother load and it won’t cut on. Unplugged, tried the power button reset, and checked voltage. I have 240 120/120 at the plug and the dryer wire hookups. Any idea I would be thankful
Thanks for watching & that’s no fun. It can be a couple things. Since the reset procedure didn’t work, you may have something electronically internal that has failed. Most common cause is a failed control board. This can be a pretty friendly DIY project. Please keep us posted, us fellow DIY’ers need to stick together..
Hi my dryer display lights and powers on and off however when I press the power switch nothing happens. I did hear a “ pop”as I walked by and then it stopped spinning. Could you help please ?
Thanks for watching & welcome to the DIY Raptor Club. Any update? We recommend performing a full system reset. Below are two links to videos showing reset procedures. ua-cam.com/video/CZpuoZYwpow/v-deo.html ua-cam.com/video/5PINGwykgkk/v-deo.html 😎👍🔧🔩
@@DIYwithMichaelBorders Thank you but we took it apart and found out it was the idle pulley that broke. We have ordered the part and will be replacing it soon. Couldn’t of taken it apart without your help thank you again for the great video.
Hi, i got kinda same problem. 1 year ago, after i moove, my dryer wont start, no power at all (nothing at the control board, no light inside). I put it in parts to test and find nothing wrong (current went in, everything seems fine. I put it back together waiting for a tech and put my palm on the power button by mistake and everything come to life. It works fine until today. This morning, my wife press the power and it start for about 3 sec and than shutdown and again, no more power, no lights, nothing. Do you have any idea what can it be ? Thanks Edit : Find the problem. Wall connector (in the wall, not the outlet from the machine) was not correctly installed.
Thanks for watching and sharing your experience as well as your findings. If we read this correctly, you’re back up and running. Reach out to us any time! 😎👍
Thanks for watching Rick. We wrapped electrical tape around the crimped wire for safety purposes. Hopefully the machines aren’t coming off the assembly line like this...🤔 We took over these machines when we bought our house a year back. It’s very possible that the previous owners had that machine worked on and the technician or the homeowners accidentally put the control panel back together and crimped the wire. Hope all is well Rick. Enjoy your day. Big Kentucky Derby day today. 🐎 🐎 🐎🐎
Samsung dryer selector board/knob
ua-cam.com/video/zgSA-RCn70U/v-deo.html
Help support us by buying Merch!
teespring.com/stores/diy-raptor-club
Visit our Amazon affiliate Store
www.amazon.com/shop/diywithmichaelborders?ref=inf_own_diywithmichaelborders
You save me hundreds of dollars best video I ever watch ***** five stts
@@SuperSparkle57
We are so honored to read this, thank you. 😁☕️🧰
Hi Michael, great video. Question, on the selector knob, is there an indicator mark on it so when You turn the knob the indicator points at the printed cycles on the panel, or do You just turn the knob and look at the digital screen to select?
Worked like a charm, thank you!!!
Hey good morning, you are welcome. Thank YOU as well for sharing this.
Welcome to the DIY Raptor Club. 😁👍
Bill, thanks for the video. I have a question about the voltages. When I checked the connections of the cord at the dryer. I got 114v on one side and 117v on the other side. On the 240 v side it varied between 235 and 245v. I did check the cord for continuity and it was fine. Is the less than 120v significant enough to cause dryer not to turn on at all? I get no lights on control panel at all. Once again thanks for detailed video. My multi meter broke at some point ,so I could not get readings at the outlet or breaker. Thanks, Fred
I’m having a issue the dryer is not powering on it was running fine earlier in the day went out a few hours latter to do a bother load and it won’t cut on. Unplugged, tried the power button reset, and checked voltage. I have 240 120/120 at the plug and the dryer wire hookups. Any idea I would be thankful
Thanks for watching & that’s no fun. It can be a couple things. Since the reset procedure didn’t work, you may have something electronically internal that has failed.
Most common cause is a failed control board. This can be a pretty friendly DIY project. Please keep us posted, us fellow DIY’ers need to stick together..
Did you ever figure out what your problem was?
Hi my dryer display lights and powers on and off however when I press the power switch nothing happens. I did hear a “ pop”as I walked by and then it stopped spinning. Could you help please ?
Thanks for watching & welcome to the DIY Raptor Club. Any update?
We recommend performing a full system reset. Below are two links to videos showing reset procedures.
ua-cam.com/video/CZpuoZYwpow/v-deo.html
ua-cam.com/video/5PINGwykgkk/v-deo.html
😎👍🔧🔩
@@DIYwithMichaelBorders Thank you but we took it apart and found out it was the idle pulley that broke. We have ordered the part and will be replacing it soon. Couldn’t of taken it apart without your help thank you again for the great video.
@@gracefuentes5555
We appreciate you sharing your update. New parts are always good. 😁
Hopefully many stress free days ahead for you Grace.
Hi, i got kinda same problem. 1 year ago, after i moove, my dryer wont start, no power at all (nothing at the control board, no light inside). I put it in parts to test and find nothing wrong (current went in, everything seems fine. I put it back together waiting for a tech and put my palm on the power button by mistake and everything come to life. It works fine until today. This morning, my wife press the power and it start for about 3 sec and than shutdown and again, no more power, no lights, nothing.
Do you have any idea what can it be ?
Thanks
Edit : Find the problem. Wall connector (in the wall, not the outlet from the machine) was not correctly installed.
Thanks for watching and sharing your experience as well as your findings. If we read this correctly, you’re back up and running.
Reach out to us any time! 😎👍
Great video, how would t/s the main control board vs the other 2 ??
Thanks for watching Rick. We wrapped electrical tape around the crimped wire for safety purposes. Hopefully the machines aren’t coming off the assembly line like this...🤔
We took over these machines when we bought our house a year back. It’s very possible that the previous owners had that machine worked on and the technician or the homeowners accidentally put the control panel back together and crimped the wire.
Hope all is well Rick. Enjoy your day. Big Kentucky Derby day today.
🐎 🐎 🐎🐎