Purple light of death | Ribble E bike
Вставка
- Опубліковано 5 лип 2023
- Today was a windy day so ideal for riding out on the Ribble, however after charging I noticed I’m still getting the purple flashing light of death . But I soon cleared this riding it up and down my driveway pressing the iwoc on and off .
Still annoying that you can’t update it via the app though.
Music on licence from Bensound
Royalty Free Music: Bensound.com/royalty-free-music
License code: 8OGPJMTFOUYSZCDQ
Please consider subscribing to my channel
/ @davesolobiker5601
pleased you got the disco bike sorted 😂 how can ribble expect people from all parts of the country to travel to preston to get sorted🤨
It comes back each time I charge it , but disappears once I ride it for a few feet 🤷♂️ not an ideal way to update a bike as the app should be able to sort it Geordie 😂
@@davesolobiker5601 there's obviously lot's of people with the same issue dave.hopefully ribble will do something to sort it or their reputation is just going to be tarnished even more🤨best o luck
I have an Orbea gain, which worked great for over 2 years then one day i connected my app to the bike and got a message Firm Ware needs updating. So I took it to my closest dealer who was brilliant as I didn't buy the bike from him. He did the Firm Ware updated and tested it out and all was fine. I had it back but the next time I charged it I had the purple light flashing again, which disables the bike as I am sure you all have found out. It said I needed to take it to the dealer again. I took it back and he was brilliant again, after a lot of to and fro between him and Orbea and him and Mahle it was decided to reinstall the original Firm Ware then Install the latest firm ware. The dealer said there were four parts to the update but could only do the first 3 due to the bike showing Error code 193. Well Orbea said I need a new battery. However they said they won't warranty it. I am thinking how come the bike worked perfectly before the Firm Ware update. The dealer persisted with Orbea and Mahle, Code 193 is Cell Over Voltage Protection. Mahle looked at the update loaded to my bike and the firm ware was iM2EM121 > iM2EM126 . I think it only shows the error code when it is charged to 100% If you crank the peddles round or ride it to get it to 99% the purple flashing light should go out. I have yet to charge it again. I have also deleted my Mahle app so to try and avoid my bike being immobilised again when another Firm Ware update is brought out. Intrested to see how anyone else has got on.
It sounds like you have had an utter nightmare , it seems all the trouble is with x35 system . luckily my dealer is miles away and I haven’t had mine updated yet. But after fully charging it flashes purple until I ride it a few yards and it disappears .
It’s annoying when Mahle keep sending emails about how you can update your bike on the app , only if it’s the x20 as the x35 doesn’t work which is really helpful….not !
I’m sick of highlighting it in there promotional videos as it falls on deaf ears.
For the x35 system the app does very little in my opinion, happy riding atb Dave 🚲👍
Are you still using the speed derestricting device? Is it probably that causing the 'over voltage' error?
Yes it’s still on , I had the over voltage error months before I fitted the device. it’s a common fault on the X35 motors
I get the purple flashing light on my Orbea gain when the range extender runs out of battery power. Just switch it off and on again and it’s fine
Yes it done it again this morning , but switched off then on and it cleared 👍
I get it occassionally on my Raleigh trace. If I fully chagre the battery it goes awy until battery runs down enough. Avoiding using the app has lowered the occassions also. Annoying as otherwise great bike.
It’s not an uncommon fault then.
I love my e bike. Sadly, too old and fat to get up the hills without a bit of help 😀
They certainly get people out on bikes , I reserve mine for really windy days 💨🚲👍
How are you getting on with the saddle?
Done some minor adjustments and seems a lot better 🚲👍
@@davesolobiker5601 great news 👍
Hi Dave. I have the constant flashing purple light all the time now, and it does not disappear at all after taking the Bike down to 96%. Any suggestions on how to fix ?
Sorry to hear that mate, unless you can get it to a dealer it beats me ?
Took it to Ribble Blue water. They did the update but did not fix the issue. Said it is either the sensor or the battery. They suggested I clean it and if that doesn't work it may need a new battery. To much hassle in the end will look to sell sadly.
That’s really poor customer service , they could have cleaned the battery and tested it with a new one to see if that worked ..
Absolutely. They said as it's not in warranty I could contact Mahle. Don't think they wanted the hassle ultimately. Pretty poor when seemingly this is a very common problem when I read online
I think it's very easy, the motor connecting wire is disconnected or loose..
In Poland they bricked the trains, how you can be sure if manufacturers are not doing it to the ebikes? I will not go to the dealer with my levo sl, (mahle) as I doubt they would do any good by applying soft update. I do not trust them. Industry is on the collapse, they will resort to anything, I suppose.
You could be right , mine still hasn’t been into the shop and I probably won’t either.
Just lift bike up spin the pedal it’ll go out
Yes that’s the way forward from now on 👍