Hey JB very cool build i can't imagine doing 83 mph on that bike being so low to the ground it has to be pretty crazy. I really enjoy watching this video thanks for sharing please ride safe buddy.
Needs some major cable reroute/management. Has a very unprofessional and unfinished look to it. Route the phase wires on the swingarm, ditch the electrical tape and use marine grade heat shrink. And id use black split loom or braided sleeve to blend it in better. This will also shorten the length of copper that you're using. Find yourself a flanged xt90 connector with spark arrestor built in and mount it correctly(don't use a zip tie). Rear brake cable should be mounted along the swingarm too. It would be easy for the phase wires or brake cable to get snagged. Also I'd replace your controls so you have all in one master cylinder, lights, horn. The squeeking in your headset I suspect isn't a grease issue, it probably has something to do with what you mentioned early on in the video?
@JB360_NYC oh you actually did it already I gotta go back I didn't see the whole thing but yeah I'm sure they were tripping. Be safe man your so small out there but power to weight always gonna be fast. My boy has a 14kw Razor that thing is fast I can imagine. I saw comment guy wanted to give you $3500 to build one so I guess you'll do it for free, lmao what's wrong with people yeah right double that bro fk that
I got nothing man... I thought the KR5V mid mount with 72450 and a 72v24ah pack was overkill for my mx650... You took it to a whole 'nother level mah dude! DONT DIE! Bring it to a dragstrip and get some 1/8 mile possibly 1/4 mile times... Or get a DRAGY
That's awesome - well done! I have a similar build with a Quillbix frame (45AH 72V Moli/72530 fardriver). SO much fun, but mine tops out at "only" 75 mph. :)
If you ever come to San Diego, I suggest that you take a ride on my Coolfly Cheetah-Pro. It has 20000w, 84 volts, and 58ah. I can not ride as fast as you can to estimate how far it could go.
Can you do a tuning video? I have somewhat of the same setup, but different! A SX500 fardriver 72890, sotion FW01 swingarm kit with the front fork kit, amorge battery 350a also had them wire an extra discharge cable to bypass the bms, any tuning info would be greatly appreciated, thanks and killer build
@JB360_NYC I wanted to ask, that's the sotion front end you have, how did you get the bearings to sink into the collar? I ended up buying the ride or die bolt kit but would like the beefiness of the sotion kit
@GoodCitizen2005 the lower bearing should sink down to the collar. Mine seated just above and I just gave the bearing a little knock with the mallet and it stayed down. Once you have that seated just grease the lower bearings and you should be good.
My friend you go tuning to an other level!!!😱🤩🤩😻 Respect!!👏👏 Question: why you put a 96890 for a 72v battery..?🤔 Asking because I'm waiting my fardriver controllers and i order 84v for 24s pack... Did i make wrong..?? Aaa.. and one more i will put twist throttle with this upgrade (From thumb).. Do you suggest a specific twist throttle match with fardriver controllers..??
@@Antony--DIY I actually used the 96890 because there were no 72890 in stock hehe. But thankfully the 96890 can handle 72v - 96v so your 84v setup will be fine. In terms of throttle, I would usually suggest any twist throttle is fine. Some people like the Domino or Surron throttle because of the feeling but any full twist will be fine.
Insane build bro,you are miles ahead of me im still working on upgrading from a my1020+. What is your recommendation, I was thinking a krv5 or the one motor.
@@milesneff8886 I haven't had much experience with kunray motors but I'm always hearing really good things about the Sotion FW11 motors. Pushes a ton of watts and doesn't really heat up as much. You can even go Sotion FW01 with the bolt on swingarm ( if higher top speed is your thing).
@@JB360_NYC yeah, give it a try. Use an insert with a decent thread length and loctite. Should work well. Sweet build and that price is cheap for what you get
Nice work! My Honda Shadow 750 goes about 93 mph and 100 on a downhill so this bike is hella fast! I’m assuming you’re pulling a lot of amps at that speed and would probably limit the range severely?
@@Nouri_TV thanks man! Here it is: NB POWER The whole set light parts For High brake output Motorcycle kit, Headlight Front Rear Light Flasher horn voltage converter Accessories Part a.co/d/4HfEEUm
You can purchase the light kit in the description and get brake sensors for both left and right lever and connect it to the light kit. This will enable Regen and allow you to use brake lights.
QS motors will always be one of the top motor companies out there, although I have to admit, Sotion is really making a name for themselves in Surron and now Razor market. I see them more as competitors now.
So far 83 but it can def go faster and maybe hit 90. Here's the link to the light kit: NB POWER The whole set light parts For High brake output Motorcycle kit, Headlight Front Rear Light Flasher horn voltage converter Accessories Part a.co/d/5iXUo5d
Hey Jeff i was wondering if Kevin was cheaper then Powerful lithium if you got a price from them. If you could let me know i would appreciate it thanks buddy.
@@brandonyoung3425 haven't fully tested it out but it can probably handle it for a good minute without overheating. The continuous current is pretty high but you gotta watch for temps. I'm loving the quietness of the hub though. I think the mid-drive would be excellent more for the MX and off road riding.
Ok about to start ordering everything and just want to make sure I won't regret the hub. I want to go fucking fast I don't care how small it is lol thank you
@@brandonyoung3425 yea I mainly use Fardrivers now and they don't get that hot. KOs are a nice option as well. Seen plenty of Surrons use them especially the big block.
I was going to do an MX650 build a while back with the FW01 mid drive Sotion but I ended up going with the RSF650 frame since I like the design and got the for a good price.
So I don't think they have the custom swingarm for the Coleman yet but if you happen to know the dropout size of your rear wheel, you can see what motors are available for that frame.
Hey dude, nice bike. I got a razor too not that crazy but with the the one Motor I agree that DMN shock pretty much sucks. I don’t know why they’re selling that saying that it’s way better than the stock one. Can you give me a link to the shock that you got.
Yea dude I'm about 200 pounds and it was sinking too much even with preload adjustment. Here's the one I switched to: Trkimal 980LB Rear Shock... www.amazon.com/dp/B08Y97677M?ref=ppx_pop_mob_ap_share
@@DylanKessler-rm2lx here are the dimensions below. You can also reference my UA-cam channel JB 360 with Grace from Amorge drive.google.com/file/d/14EwT3QB2N6VXIzjiiOvwwzgavyGLUMjX/view?usp=drivesdk
@@JB360_NYC damn. Should have ordered mine air. Mines coming by boat. Building a fw01 kit for the sx500. I’m in Astoria and I’ll see you out there when it’s done.
Becci is the one in regards to the motors and she is really responsive on Facebook Sotion Swingarm and Front Fork Kit for RSF650: Contact Becci Alisa for any inquiries- facebook.com/profile.php?id=100023171238456
@@5cheeta super torquey but also because my throttle settings are maxed out. You can definitely pop a wheelie off the rip if you don't shift your weight.
I had a qs205 on 14kw and it was too much to handle on an e-bike. Center of gravity is way too high and front end is too light to use that much power on.
The only place you could have put it? How about the turning signal cluster before the brakes. I mean the brake lever is about a half a foot long😆😆😆 I'm sure you can pull the lever after swapping them around.
@@JB360_NYC I drive 18 wheelers through Brooklyn all the time are you ever in Brooklyn? And I see a lot of people on scooters there and I’ve always wanted one
20kw... ok... and how long last the batteries ?? I guess that motor eats energy like hell so the charge will be down in a short time... as we now know max speed... what is max DISTANCE??
This cost me about $3500 but I can go on the highway as well and other places such as bike paths, off road if I want to. Also, I don't pay for insurance or registration since it's electric in our state. Also I save hundreds and thousands on maintenance and service. This bike is awesome lol.
That's way too much power for that little bike.... I FULLY APPROVE!
@@anthonysuarez7416 😁
At this point it’s a culmation of the parts it’s no longer a toy this is a full blown motorcycle lol I dig it
Thought you were choosing to be a certified Ken at the beginning of your sentence, then it turned to spot on!
You are a speed demon for sure, I’ve watched you go from fast to faster. Keep it going
Seemed smooth over bumps even at highway speeds - solid build - respect.
This is the coolest build I’ve seen so far love it!
I just got one definitely going to upgrade it really soon
Let me know if you need a contact if you go the Sotion route..their motors are insane
What portion hub motor is it and does it have warranty and what’s the controller is that far driver and which one and also battery
@@JRideRiSLife check the description, it has the links and details
Hey JB very cool build i can't imagine doing 83 mph on that bike being so low to the ground it has to be pretty crazy. I really enjoy watching this video thanks for sharing please ride safe buddy.
20KW IT S INSANE I THINK I WILL BUILD MINE 2 KEEP IT UP MATE !
Love the build. I like how its a hub motor so no chain noise. Completely silent.
@@OregonCrow Ah that's because I have a surron and also a 10kw hub motor bike. The hub motor makes no noise.
@@chesteryaowhat’s the link for that rear hub motor
always love the highway runs! so insane
Best looking Razor I've seen no competition. I would've ran the phase wires differently though.
Thanks! Yea these are the longest phase wires I've had to deal with lol
I’m thinking some flexible sealtite conduit would be nice 👍
Awesome Build brother! she's a Monsta! Lets GOOOO!!
death trap on 2 wheels! well done!
Looks cool and speed to match! That thing is awesome!
Looks so good. Cant wait to see full charge top speed run.
Needs some major cable reroute/management. Has a very unprofessional and unfinished look to it. Route the phase wires on the swingarm, ditch the electrical tape and use marine grade heat shrink. And id use black split loom or braided sleeve to blend it in better. This will also shorten the length of copper that you're using. Find yourself a flanged xt90 connector with spark arrestor built in and mount it correctly(don't use a zip tie). Rear brake cable should be mounted along the swingarm too. It would be easy for the phase wires or brake cable to get snagged.
Also I'd replace your controls so you have all in one master cylinder, lights, horn. The squeeking in your headset I suspect isn't a grease issue, it probably has something to do with what you mentioned early on in the video?
Disagree with virtually of that (non-safety related). Love the whole ratrod esthetic this bike has going for it.
Man that is AWESOME!!!
The brakes must be elite 😮💨
I love how it just wistles no matter how fast your going. Defintitely gotta invest in something like this
Nice work Bro you go on the highway with a Razor Im here for it lol
I'm wondering what people were thinking 😆
@JB360_NYC oh you actually did it already I gotta go back I didn't see the whole thing but yeah I'm sure they were tripping. Be safe man your so small out there but power to weight always gonna be fast. My boy has a 14kw Razor that thing is fast I can imagine. I saw comment guy wanted to give you $3500 to build one so I guess you'll do it for free, lmao what's wrong with people yeah right double that bro fk that
@@ChrisCrossingWires1212 yea man I was like that's gonna be $3500 Plus labor 😆...thanks bro yea that power to weight ratio is crazy
@@ChrisCrossingWires1212both of y'all's 😅 🏍️🔥🔥🔥
I got nothing man... I thought the KR5V mid mount with 72450 and a 72v24ah pack was overkill for my mx650... You took it to a whole 'nother level mah dude! DONT DIE! Bring it to a dragstrip and get some 1/8 mile possibly 1/4 mile times... Or get a DRAGY
That is a nice build.
WOW nice bike seems these are getting faster every year.
Awesome build man I'm looking to do something kinda crazy with my amyet s6 and this just screams my spirit animal lol
That's awesome - well done! I have a similar build with a Quillbix frame (45AH 72V Moli/72530 fardriver). SO much fun, but mine tops out at "only" 75 mph. :)
Is that the p42a or p45b
14:53 gold frame. 🔥🔥🔥🔥🔥💪🏿
Love it my guy
If you ever come to San Diego, I suggest that you take a ride on my Coolfly Cheetah-Pro. It has 20000w, 84 volts, and 58ah. I can not ride as fast as you can to estimate how far it could go.
That's a beast setup! Def have to come to the West coast soon. You guys have a big community over there!
Ayye nice work my guy!!!
i actually bought one of the last ride or die fork kist before they went out recently 😅 they are nice though definitely recommend
@@jacksonoutram4943 damn I'll have to wait till the next shipment. I'm guessing they ran out of the gold ones as well 😭
Can you do a tuning video? I have somewhat of the same setup, but different! A SX500 fardriver 72890, sotion FW01 swingarm kit with the front fork kit, amorge battery 350a also had them wire an extra discharge cable to bypass the bms, any tuning info would be greatly appreciated, thanks and killer build
@@GoodCitizen2005 that's a great setup! I can do one in a future video or post my parameters in a Google doc
@JB360_NYC I wanted to ask, that's the sotion front end you have, how did you get the bearings to sink into the collar? I ended up buying the ride or die bolt kit but would like the beefiness of the sotion kit
@GoodCitizen2005 the lower bearing should sink down to the collar. Mine seated just above and I just gave the bearing a little knock with the mallet and it stayed down. Once you have that seated just grease the lower bearings and you should be good.
My friend you go tuning to an other level!!!😱🤩🤩😻
Respect!!👏👏
Question: why you put a 96890 for a 72v battery..?🤔
Asking because I'm waiting my fardriver controllers and i order 84v for 24s pack...
Did i make wrong..??
Aaa.. and one more i will put twist throttle with this upgrade (From thumb).. Do you suggest a specific twist throttle match with fardriver controllers..??
@@Antony--DIY I actually used the 96890 because there were no 72890 in stock hehe. But thankfully the 96890 can handle 72v - 96v so your 84v setup will be fine. In terms of throttle, I would usually suggest any twist throttle is fine. Some people like the Domino or Surron throttle because of the feeling but any full twist will be fine.
Insane build bro,you are miles ahead of me im still working on upgrading from a my1020+. What is your recommendation, I was thinking a krv5 or the one motor.
@@milesneff8886 I haven't had much experience with kunray motors but I'm always hearing really good things about the Sotion FW11 motors. Pushes a ton of watts and doesn't really heat up as much. You can even go Sotion FW01 with the bolt on swingarm ( if higher top speed is your thing).
What motor you got I need eventually!!
Use revnuts on the swing arm for the pegs. You can just grind the bolt flush to make sure its doesn't rub the battery.
@@jaybones614 I might try that actually. I think the middle section is better foot placement for high speed pulls
@@JB360_NYC yeah, give it a try. Use an insert with a decent thread length and loctite. Should work well. Sweet build and that price is cheap for what you get
Thanks for replying back to me
Looks good. Do the foot pegs being that far forward, put your feet in the way of the front tire when turning? It looks pretty close. Be careful.
No actually there a lot of clearance from where the swingarm starts
Nice work! My Honda Shadow 750 goes about 93 mph and 100 on a downhill so this bike is hella fast! I’m assuming you’re pulling a lot of amps at that speed and would probably limit the range severely?
Link to where you got the motor and parts please
Here's a direct link to the swingarm:
x.alibaba.com/Ax33Mz?ck=pdp
Other links can be found in the description.
I’m buying that kind of model soon and I’m going to modify it
Hub rim size 16” ? (D12 means)
How many good hard miles on a charge with that kit ? Nice build
@@NotMyName-q2v Thanks! I haven't done a true range test yet but I've done 40 miles with about 30 percent left. Also, that's with aggressive riding.
love the build came out great... that light kit with the horn got a link for that?? ty
@@Nouri_TV thanks man! Here it is:
NB POWER The whole set light parts For High brake output Motorcycle kit, Headlight Front Rear Light Flasher horn voltage converter Accessories Part a.co/d/4HfEEUm
Beautiful bike brother what is the Dropout size for that social hub motor? Ty
Thanks! Dropout is 200mm
Nice built bro, question how you connect the brakes to the Fardriver for the ebrake and regen?
You can purchase the light kit in the description and get brake sensors for both left and right lever and connect it to the light kit. This will enable Regen and allow you to use brake lights.
This Ebike rear shocker works ?
As it’s Swingarm is welded to body
Shock works great and the swingarm is actually a separate piece
AMAZING! What kinda range can you get?
@@NunyaBusiness251 haven't tested it out yet but will be doing a range test soon!
Oh u close. Highway Gang. U gotta pull-up on us.
@@DarkKent 💯
This is fucking CRAZYYYY … shit is so fast and powerful that it belongs on the highway 😭😭
My new favorite build 🔥👌🏿
Appreciate it brotha!! 🙌🏻
Crazy top speed. Can it wheelie?
@@BubCityHoodRides for sure! I've seen some other ppl with the same swingarm pick it up
@@JB360_NYC I've got exactly same amount in my mx500. Crazy to run across this video... 🔥🤙🏾
Are sotion motors basically rebranded QS? They look very similar. Thx
QS motors will always be one of the top motor companies out there, although I have to admit, Sotion is really making a name for themselves in Surron and now Razor market. I see them more as competitors now.
What is your suspension shock setup? Did you have to go longer than 270mm?
@@Darryl_Torculas for sure, I had to go 290mm in the rear. It worked out pretty well in terms of even-ness with the back wheel
Nice! What speed did you hit?
Would you happen to have a link to the nbpower converter? I searched amazon but couldnt find it thanks!!
So far 83 but it can def go faster and maybe hit 90. Here's the link to the light kit:
NB POWER The whole set light parts For High brake output Motorcycle kit, Headlight Front Rear Light Flasher horn voltage converter Accessories Part a.co/d/5iXUo5d
@@JB360_NYC thanks
Have you thought about doing this set with a MX650?
I was originally going to go with the MX650 but I liked the RSF a little better. If I ever get my hands on a MX I might do the FW01 motor swap.
Hey Jeff i was wondering if Kevin was cheaper then Powerful lithium if you got a price from them. If you could let me know i would appreciate it thanks buddy.
@@garymertens2019 yes Kevin is cheaper by a few hundred dollars
The frame including the tank it almost looks similar like the Honda Grom.
Yup that was my first thought too
How long can you hold 80 mph and are you still happy with the hub motor or do you wish you would have gone mid mount
@@brandonyoung3425 haven't fully tested it out but it can probably handle it for a good minute without overheating. The continuous current is pretty high but you gotta watch for temps. I'm loving the quietness of the hub though. I think the mid-drive would be excellent more for the MX and off road riding.
Ok about to start ordering everything and just want to make sure I won't regret the hub. I want to go fucking fast I don't care how small it is lol thank you
@@brandonyoung3425 definitely scary fast 💯. I have no doubt this thing can hit 90.
Are you happy with the controller I was thinking about going with a KO controller
@@brandonyoung3425 yea I mainly use Fardrivers now and they don't get that hot. KOs are a nice option as well. Seen plenty of Surrons use them especially the big block.
awsome build! really that costs youn $3500 including thr molicel pack?
@@Omar-tz8hx yup! Molicel pack was $1600 from Amorge
My Tuttio comes this week⚡️👍🏽⚡️👍🏽⚡️👍🏽
Nice! It's like a mini Surron 🔥
got my seeker 26 a few days ago... a dual motor beast that runs 57kmh.... not bad for 1100 bucks... love it
I sent my little dirtbike back I think it was a piece of garbage
@JerseyStyle7 was it too underpowered?
@@JB360_NYC no not at all. I’m not a speed demon, but the frame and the whole bike was squeaking and squealing.
for that speed, what break system you use bro?
@@omuupied6760 for these I'm using motorcycle brakes
What's the name of that frame and where to buy it from
This is a Razor RSF650 frame. You can get them from Razor for crazy cheap or Marketplace for under 500
Anthony I would like to know more .Iam planning to make my bike simila.
I already have a frame and I like make electric.
Nice! Are you looking to mod a Razor?
Which one you like more hub or mid drive setup?
I was going to do an MX650 build a while back with the FW01 mid drive Sotion but I ended up going with the RSF650 frame since I like the design and got the for a good price.
How do I get one of those kits I already have a b 200 Coleman frame
So I don't think they have the custom swingarm for the Coleman yet but if you happen to know the dropout size of your rear wheel, you can see what motors are available for that frame.
You have a link to the swing arm kit?
@@wattleyracing here it is:
x.alibaba.com/Ax2C00?ck=pdp
Hey dude, nice bike. I got a razor too not that crazy but with the the one Motor I agree that DMN shock pretty much sucks. I don’t know why they’re selling that saying that it’s way better than the stock one. Can you give me a link to the shock that you got.
Yea dude I'm about 200 pounds and it was sinking too much even with preload adjustment. Here's the one I switched to:
Trkimal 980LB Rear Shock... www.amazon.com/dp/B08Y97677M?ref=ppx_pop_mob_ap_share
Nice
I live in NJ, there is no way that’s legal. 😂 wild shit man.
@@FrankA-973 thanks! 😁
do you have a link or name for the ebrake magnet kit?
HUDAMZKY Ebike Brake Sensor... www.amazon.com/dp/B09MYK2FB5?ref=ppx_pop_mob_ap_share
All it takes is one pothole 🤣
But still 🔥🔥🔥🔥
Dang u should do this on a Mototec 😂
Where in NY are you located?
@@christopheryu5257 I'm over in Staten Island
Do you have a link for the motor?
m.alibaba.com/x/AxEcOU?ck=pdp
Make it dual motor please, rear and front.
How many volt is that battery and where can I get one?
@@DylanKessler-rm2lx this is 72V and I got mine from Amorge battery. Check the link in the description 👍🏻
@@JB360_NYC how much did it cost you?
@@DylanKessler-rm2lx it came to about $1600
@JB360_NYC do you have the dimensions for the battery lol Amorge doesn't know what size I need
@@DylanKessler-rm2lx here are the dimensions below. You can also reference my UA-cam channel JB 360 with Grace from Amorge
drive.google.com/file/d/14EwT3QB2N6VXIzjiiOvwwzgavyGLUMjX/view?usp=drivesdk
How long did your amorge battery take to deliver?
@@bighead331 Mine took about 2.5 weeks by air
@@JB360_NYC damn. Should have ordered mine air. Mines coming by boat. Building a fw01 kit for the sx500. I’m in Astoria and I’ll see you out there when it’s done.
@@bighead331 hellz yea man we have to link up! The FW01 is a beast
@@JB360_NYCoh yea for sure. Def going to need your help tuning the beast.
How do I get in contact with the company either one
Becci is the one in regards to the motors and she is really responsive on Facebook
Sotion Swingarm and Front Fork Kit for RSF650:
Contact Becci Alisa for any inquiries- facebook.com/profile.php?id=100023171238456
@@JB360_NYCis shipping over seas? Or in a USA based warehouse?
@@cii5korea217 they ship from China
@@JB360_NYC prices the same as Alibaba or any other similar website or about the same ? Thanks for the reply 🙏🏼 be safe
can i get the link for the 20,000 motor ?
Check the Facebook link in the description, Becci is the main contact person!
Sikkkkk👍🏽💯
What controller?
Never mind lol I checked the description of vid
Brother how much does it weigh?
@@danutcrackerstream5799 it's a lot heavier now. About 180 pounds
Awesome thnx bro.
How is the torque?
@@5cheeta super torquey but also because my throttle settings are maxed out. You can definitely pop a wheelie off the rip if you don't shift your weight.
🤘
Definitely not a kid's toy anymore. Adult man child ftw. Ejecto Seato cuz 🤟👽🚲🎬
@@louietramposch4559 😂
Yk where I can buy a stealth bomber clone ?
You should def check out
ablebike.com/enduro-bike-full-parts-c0403
Name ur channel Suronster 2.0😂 sick bike, how much did it cost to build?
@@RippingLips23 lol. The total build including the bike came out to $3500
Don't let a screen dictate your riding style
that motor can eaily go over 30kw providing the controller and battery are powerfull enough ,and the theoretical max for your system is 32kw
I had a qs205 on 14kw and it was too much to handle on an e-bike. Center of gravity is way too high and front end is too light to use that much power on.
The only place you could have put it? How about the turning signal cluster before the brakes. I mean the brake lever is about a half a foot long😆😆😆 I'm sure you can pull the lever after swapping them around.
@@Tiffyboo383 yep you're right, I'm actually going to be putting it there before the master cylinder
3500 that it???? What really omg I want one just like yours what about getting pulled over by the cops have that ever happened yet?
No trouble with police...a lot of them think it's an actual motorcycle so they don't pay any mind.
@@JB360_NYC I drive 18 wheelers through Brooklyn all the time are you ever in Brooklyn? And I see a lot of people on scooters there and I’ve always wanted one
@@SpilledMilk888 I used to a couple years back around the Gravesend area. Miss Brooklyn and a lot more livelier than SI
I want to do the same build but on an MX500 frame but I need these links and I'll subscribe to you Thank you in advance
Hey so I would def dm Becci Alisa on Facebook to see if they have compatible swing arms for the mx500. As far as I know they have one for the MX650.
oh look its a honda.. grom?
@@Stukafn e-grom maybe hehe but wayy faster
20kw... ok... and how long last the batteries ?? I guess that motor eats energy like hell so the charge will be down in a short time... as we now know max speed... what is max DISTANCE??
@@dg9bfc Full range test coming soon
Bro...please be careful!
Lil squeaky monster.
When you have a chance please talk to my.
your switch is so far.it should be handlebar switch brake
Yup I may switch the placement of the master cylinder and switch
Redo the black pls lol
Can you build me one and I pay you $3500?
If you live in NY I could possibly set something up but I would charge a little extra for labor of course
@@JB360_NYC not far. From boston
No se cuanto cuesta todo eso, pero con una cbr600 de 1200 dólares voy mas rapido y voy hasta por la autopista y tu no😂😂😂😂
This cost me about $3500 but I can go on the highway as well and other places such as bike paths, off road if I want to. Also, I don't pay for insurance or registration since it's electric in our state. Also I save hundreds and thousands on maintenance and service. This bike is awesome lol.