SPA Artemis P15 - Regulator replacement
Вставка
- Опубліковано 1 жов 2024
- How to replace the original regulator with a more advanced Altaros regulator. Easy installation guide.
UA-cam Audio Library :
Echinoderm Regeneration by Jingle Punks from UA-cam Audio Library goo.gl/YmnOAx
Pentagram by Audionautix (audionautix.com)
HI nice video, I see you've replaced the old green seal with a new black type,could you please let me know where I can get one and the size please.
As I can only find original replacements.thnx clive
Well folks, Altaros products & service is tops!!
I have purchased other regulators for other air rifles as well and they are spot on! You can also tell by this video when the change of regulators is being done that the simplicity of installation is astonishing. I am in the market now to get the Onix K2 multi-shot, which is actually the P 15 (I believe) and will be fitting one of these regulators for sure!!
Also, I think it is worth mentioning, that the service given to the client at Altaros is tops as well!!
Nice stripdown 👍 Personally I would totally strip her down and oil/grease appropriately. Real shame the manufacturer does not provide ANY information on their stock regulator, so stupid 😞
Hola, quiero saber el tamaño MÍNIMO del orificio para una velocidad de unos 270 m/s (pellets de aproximadamente 1g) (para Snowpeak P35), gracias, cdt.
Just one question. How do you know what the regulator is set at befor replacing 🤔. Thanks be a shame to have to stip down if not set high enough . Thanks
Can you make video before and after regulator replacement regarding accurancy?
another quality video geezer, but how did you empty the air bottle so quick?? atvb Andy
Keren gan
Gret video! Thanks. Where did you buy the new regulator from as I would like to do the same on my p15? Thans Stu
Hello, could you clear my doubts? I recently had the p15 0 ring that you changed, what size is it, and the other question, what difference does this regulator make from the original? Success and thanks.
Good ☺️ video I'm Waseem from Pakistan
This same regulator can fit it for Diana Skyhawk
Nice. You put out very good videos. I appreciate you pausing and going slow enough any novice can follow. One question. Isnt there a bleed screw on the tank?
Yes but I had to put some locktite on the ball to get it to stop leaking, after I used it. I made a ca 20mm long piece of 8mm round stock and put it in instead of the hammerspring and tighten the hammerspring adjuster until the valve opens a little, works great.
I guess Im asking randomly but does any of you know of a tool to get back into an Instagram account..?
I was stupid forgot my login password. I would appreciate any tips you can offer me!
@Kingsley Ayden instablaster :)
@Otis Kamden I really appreciate your reply. I found the site thru google and Im waiting for the hacking stuff atm.
I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
@Otis Kamden it worked and I actually got access to my account again. I'm so happy:D
Thanks so much you really help me out :D
Exelente video amigo una consulta cómo le sacas tan rápido el aire al estanque del p15
You empty the gun from pressure with new method..is this suitable for gun ???
I'm not sure what you mean, but the safest way to release air pressure is by shooting without pellets
Please dear let me know how to degas p10 airgun
the safest way is to shoot the air by shooting without pellets
@@AirgunRegulator sir but there is problem arise in loading.. the cannot be loaded.
@@mallam378 if the rifle cannot be loaded, it is necessary to contact the manufacturer. In this regard, we did not have the rifle disassembled
Dear how I can contact the snowpeak company
Assalamu Alaikum will be sending India P15
Wooow i like it👍👍👍
I'm from Indonesia, how do i buy this altaros regulator for P15?
The best is to buy directly on our website: www.altaros.cz/en/regulators/141-9632-spa-artemis-p15.html .But we have a holiday this week, so it is necessary to count on sending next week
did the new regulator makes any difference?
What Regulator you using iy?
wew.... emejing brother
please. show some demonstaration on Hatsan or kral bottled pcp with results!
Can I contact you?
Cuanto cuesta una de esas y donde la consigo
What kind of extra power would I get using this reg
This regulator does not add extra power, it only ensures more accurate maintenance of the outlet pressure.
Nice! Can you please tell me what is the thread size on that air cylinder of p15?
Hello, unfortunately we only borrowed the rifle and we did not find out this information.
I cannot get any accuracy at all from my Artemis p15.. I was wondering if I have damaged the crown using gun cleaning nylon cord & rag? I put this question to Phil from Rat works tuning..(had my Air Arms S200 tuned by him) he says a lot of the kral rifles suffer from a transfer port that is far too big and it damages the pellets when they're being loaded. He asked if I knew the size of the port, any help appreciated.
Unfortunately, there can be a number of problems regarding accuracy. It is one of the differences between cheaper PCP and more expensive PCP.
you can buy a lothar walther barrel ,not very difficult to make it fit .
Great video, have you a size for the seal you replaced please
👋🏾thank you for this video brotha 👊🏾😎
Ha!
How do you bleed the air like that.i want to change my reg but don't know how to bleed the air first
the discharge was made by firing blank without pellets. The rifle had already been emptied to a small pressure in advance, and then the last blank shot was need to fired for full discharge.
Me parece que te olvidaste de colocar el oring en la picó de la válvula antes de la caja disparadora
Perdón la ignorancia que le ISO yo compré uno y me da curiosidad gracias
@@martinesquivel5274 le cambio . La válvula reguladora. X lo que parece es un altaroz. Con esa válvula no varía casi nada entre tiro y tiró.
@@federicoaguirre396 yo no le cambié nada está como viene de fabrica
@@martinesquivel5274 yo al mío. Lo desarme y le subí la potencia un cuarto de vuelta .
@@federicoaguirre396 me pasas un vídeo aver como lo isiste el mío es p15 6.35
Excellent Job Done👌❤️
Excellent
What regulator settings? Bullet speed?
Here we have results from Diana Outlaw, which is just another brand : www.altaros.cz/en/regulators/141-9632-spa-artemis-p15.html#/62-awpdetails-
good movie - but you forgot to place green oring which you removed at the beginning
Hello, I did not forget green o-ring. I replaced this o-ring with another, because the green o-ring tends to remain enlarged for several days after disassembly and it is a problem to screw it back on the rifle. Therefore, it is replaced by black o-ring. It is see at time 3:28
@@AirgunRegulator indeed - my mistake
as I mentioned before - good movie, very helpful :)
Mi freans regulador + power???
You can find some results with a similar rifle on our website at the bottom of this page: www.altaros.cz/cs/regulatory/141-9632-spa-artemis-p15.html#/62-awpdetails-
Muito bom
Donde compro esa valvula?
www.altaros.cz/en/regulators/141-9632-spa-artemis-p15.html
And you degassed HOW ?
The easiest way is to shoot without pellets .
@@AirgunRegulator Thank you , was perplexed . Sadly after putting it all back together and shooting 200 ish pellets , my FPS is still 627-882 without touching the hammer spring .
Could you explain the maintenance of the pcp p35 as well, because you are the only one who can explain well and in detail. Thanks for the information
Buen video amigo donde se puede conseguir
Hello, it can by find on our website: www.altaros.cz/en/regulators/141-9632-spa-artemis-p15.html#/62-awpdetails-
@@AirgunRegulator Ok thank you very much for answering
Como faço pra comprar aqui no Brasil amigo
Buenas amigo consulta este regulador le hace al p10 spa si me puedes ayudar gracias saludos cordiales
@@janosupervisor podiate conseguir el la válvula