These Installs are Going to be GAME CHANGERS for us Living on Our Catamaran Full Time in the Tropics
Вставка
- Опубліковано 8 січ 2024
- Living on our catamaran full time takes lots of planning and prep especially when we are off grid in the tropics for extended periods of time. In this video we bring you with us for the last of the projects we want to get done before we head to the Bahamas on our new sailing catamaran for the first time. It has been years since we have been back over and we are so excited to get back to our favorite place and find unexplored gems and survive on seafood! Make sure to subscribe so you don't miss out on the fun!
This is the washing machine we installed amzn.to/3TSI1OL but it seems to be the same unit sold under a few different brand names.
tulasendlesssummer.com/bringi...
Tula Merch available always in The Tula Shop: tulasendlesssummer.com/shop-tula/
Want a first look at our videos, up to date location information, and Tula Shop discounts? Become a Patron for all that and more! - / tulasendlesssummer
*Some of the links below are affiliate links and we may earn a small commission if you purchase something through the link.*
For a first-hand look at our favorite boating essentials, camera gear, safety equipment, navigation setup, dive equipment, suggested reading, and much more visit our Amazon Affiliate link. www.amazon.com/shop/fikitensup
Are you eyeing Sierra's leggings or Billy's board shorts?? You can find all our favorite Waterlust apparel here: bit.ly/waterlust_tula
Are you into the nitty gritty of how things work, product reviews, and the more technical side of boat life? Check out our other channel, Tula’s Tech Talk! - / @tulastechtalk
UA-cam is awesome but we are also on Instagram and Facebook. If you follow us on these platforms you are invited to Q&A’s, polls, and are often much more up to date on where we are!
Billy’s Instagram: @TulasEndlessSummer bit.ly/instabilly
Sierra’s Instagram: @TulasEndlessSummer_Sierra bit.ly/instasierra
Jetty’s Instagram: @JettyTheGypsy bit.ly/instajetty
Tula's Endless Summer Facebook: tulasendlesssummer
All of our most frequently asked questions are answered here:
tulasendlesssummer.com/tulas-e...
A few of our amazing affiliate partners:
BRNKL Boat Monitoring - www.brnkl.io/partners/tula/ Use code "tula" for 10% off
Waterlust - bit.ly/waterlust_tula
Raw Elements Sunblock - bit.ly/RawElementsTula Use code “Tula” at checkout for 10% off!
Kiteboard, Wing, Foil, and Paddle Gear - bit.ly/AdventureSportsUSA Use code "Tula"for 10% off!
Hobie Polarized - bit.ly/HobieShades Use code “HPTULA20” for 20% off!
TotalBoat - www.totalboat.com/Tula
All our music is licensed from Epidemic Sound www.epidemicsound.com/referra... unless otherwise noted here
For Business Inquiries email tulasendlesssummer@thestation.io
#tulasendlesssummer #catamaran #boatwork
When you open up the washer to disable the tilt sensor, you can also move the hose inlet over to the side. It'll be fine. yeah... it will be fine. It should be fine. :)
I was looking for this comment. It's super awkward where it is located. And, having to disconnect it every use will over time cause a problem.
I even think the cushion needing to move every time will be annoying
@@Karma-fp7ho Yeah the you gotta move something to do something is very frustrating on a boat!
Put him in charge of laundry and things will change
You could put the hot water heater on a timer so you don't accidentally leave it on😊
Publix has a dock for boater to shop on your way out the port. I read about it last year.
They had one in Treasure island on the Gulf. Very small docks though.
HI Billy and Ciera, well done, I would mount a boiler drain (dummy that is not connected to ahything but the wall) on the bulkhead behind where the hose goes in to the washer so that when the supply hose is not attached to the machine it can screw onto the boiler drain fitting and act as an additional shut off for that line, redundency is good where water on a boat is concerned.
You two inspire me each time I watch one of your videos to be a happier person, thank you.
When I vacuum pack I flatten each pack as flat as possible after the seal. Saves a lot of room in the freezer.
Sierra’s expression when she was talking about Billy was just the sweetest thing! Happy for you two! 💕
Great video once again , love the midge netting looks very professional Sierra, well done and with the washer Billy , but I still think S will be using the bucket from time to time , lol , here’s to the next video , can’t wait to be honest love you guys , 👍Graham
If you are washing a towel in with other clothes that will stuff up the balance regardless of whether you are on land or at sea, because the towel will naturally hold more water weight than the other clothes or sheets. With top loading machines you have to wash all towels together and you might need to manually move the towels around at the spin cycle.
Sierra has such a great attitude and smile. Billy is one lucky Captain. Sierra is lucky too! Superb teamwork y’all. My new favorite sailing channel…!
projecting forward 10 years she is going to have big-bone weight fatty issues, Billy is looking tone though
@@clarityanalytics Excessive sun/calories are really tough on the body when you live on the water. While what you say seems harsh, most people don't have anyone to help them. Friends lie.
You could heat gun top of the plastic lid on the washer and form it down slightly
90° got to be hard to sleep I guess air conditioning is next can't wait Love watching guys work on your boat.😊
Sierra, you did a beautiful job on the mesh door. 👏
Billy, a little more tweaking on the washing machine, water routing, and balance is needed. I'm confident you'll get there.
Thanks for not boring us with where you store everything.
Thanks for sharing. Bahamas bound. 🏝🇧🇸
Something to consider is a (Panda $200?) centrifugal spinner, they spin 10 times better than any washing machine. Fleece jackets and polyester towels will dry in 5 minutes, cotton t shirts 20 minutes. With the spinner, the only reason to have a dryer is to get the wrinkles out. You won't have stuff hanging all over your boat, and save a ton of time.
Maybe get a water supply line that has a 90° connector on end to attach to machine. That way it's not sticking up in air or your face when trying to use machine. Just a thought.
You might be able to fit a 90 degree hose adaptor on the washer inlet so you wouldn't have to disconnect the hose every time.
Guys, your excitement is so palpable, I feel like I'm the one going to the Bahamas for 3mths ... Stay Safe & Fair Winds!! ☘
Get a dehumidifier to dry and put in the small guest bathroom. I can dry clothes faster than a dryer using it.
We added laundry to our boat this fall… totally a game changer. 😁
Hey Sierra after you vacuum pack the hamburger. Take a rolling pin and flatten out. Will take up less room. A plus when you defrost it will defrost very fast.
It's not you and sewing, it's the Singer, I had so many issues with mine until I bought the perfect solution..You need a Toyota gliding foot, it will fit your machine and magically resolve all of your snagging issues 🎉 I can even sew leather bags with that little upgrade ❤
So exciting. I think this is the 1st return after you 3 raised $ for Bahama relief. Waiting for this catamaran.. Getting married, traveling across country, rebuilding Mountain Mist, building with Chesapeake Light craft. So much in the last 4 years. Love it & looking forward to a return to kiteboarding, snorkeling and all your adventures. Be well & Fair winds.
One of the best all-around channels on UA-cam! Stay safe & God Bless!
Nice installation and it will make a HUGE difference for you to be able to wash your things independently.. I built a small dishwasher on our boat which was a game changer for everyone enjoying ourselves and keeping the galley neat and orderly all the time.. Because of space considerations I think the wall mount washers is what we would be stuck with - its AMAZING you were able to carve out the space to fit this into your boat.. WELL DONE... ...
I'm sure you can relocate the washer fill spout to the side of the washer. when to have time remove the top cover and look around inside the unit. washers usually come apart surprisingly easy and think about it, the hose on the inside of the washer is probably flexible tubing so the cover can be lifted.
Jetty smiling like you bought beer for her! lol
Wow, these new installs are going to be game-changers for you living on your catamaran full time in the tropics! From disabling the tilt sensor on the washer to tweaking the water routing and balance, you two are doing an amazing job. Sierra, your mesh door looks beautiful! And Billy, I have no doubt that you'll handle the water heater dip tube like a pro. Wishing you favorable winds and safe sailing until next time! 🌬️⛵️
Excellent job on the washer install!!! To help with the balancing, make sure there's a hole down the center of your clothes to the bottom of the washer when you put your clothes in.
My home washer was doing the same thing when I removed the top I noticed a piece of foam on one side I added another piece to it and problem solved
Well shows you how much he loves you hopefully he doesn't get too mad lol
This Channel is one of the channels that if I don't see a new video I will start searching and go to your Channel to see if you have put up a new one. Happy New Year, and so glad you got some time with your family!
Sierra...thank you for showing the real side of cruising...I laughed so hard (with you not at you) when you were sewing...my sewing projects usually come out really bad, but I keep on trying...great job on the screens!
I love hanging my laundry outside 😀
Whoever drinks, the Yuengling lager hell yeah my favorite
So happy to be heading back to the Bahamas with you guys, can’t wait for the next episodes. The new boat is coming along nicely with all your updates.
Connect a lanyard to the bottom side of the laundry lid so when you open it….you can let it down slowly…so it doesn’t bang against the bulkhead.
Make sure all shipping materials were removed. If you strap it down it will be worse. Speaking from 40+ years of appliance repairs, but never on a boat. Make sure it doesn't rock. It will be hard to do ,but make sure equal weight is on each of the 4 feet.
Reminded me of our provisioning/ crossing, only we had to do 2 dogs and 2 cats! Vet came to the boat in Lake Worth and did his exams 1 at a time. The salon was a waiting room! I had made up packets for each animal with the first page with their picture. BTW Jetty and our Margarita are spitting images, only ours is 18 1/2! Still going!
only a little slower.
SUGGESTION billy, when u put clothes in a washer open your clothes up and place clothes in a circlular fashion around the interior of the washer. Just like you are wrapping your clothes around the interior of the drum but laying to the exterior. Do not just throw and mash clothes in there....and think of the clothes like weights if they were wet and try to imagine and create equal weight around the interior of the drum.
Wash only swim suits together, only towels together, t shirts together etc. You get the idea. Do not overload the washer. Load no more than 3/4 dry and towels and sheets or heavy items when wet are less. If you use a towel in with swim suits, the towel is heavier and acts as a heavier weight on one side, thus causing the washer to rock or be off balance when it spins.
Another example is if u do a bed sheet, open it up and wrap it around the interior like a snake leaving a hole in the middle. This gives the washer a little help and the centrifical spinning force will help balance the load but if you just wadded the sheet up and threw it in, youre basically creating a wet huge ball of weighted fabric that will spin off balance.
Good luck
I was looking for this comment before I offered the same advice. 😉
MEAT TIP!!!!!If you have a food processor or Vita mix. Look for roasts that are on sale, like London broil, untrimmed tri tip any cheap chunk of meat works.Doesn’t matter if boneless or not. Bones make soup. Take partially frozen meat n grind in either machine, cheaper than hamburger n you know whats in it. If its to lean use lard to add amount of fat you want. Freeze all your veggie bit, onion skins, broccoli stems, any veggie bits you toss when cleaning veg keep. Add to fish heads, beef bones, chicken bones. If you have instant pot cook 45 minutes, low simmer on stove. Strain add noodles, rice whatever you like in soup. Shrimp shell’s lobster shells n fish head makes a fabulous fish stock. Love the new washing machine
Try a quick disconnect on water hose
I especially like how you switched lids on the containers of your washing stuff, you probably haven't even noticed. Enjoy the Caribbean you guys!
We have exact same washer, going on 15 months in the Caribbean on our catamaran, Zero problems, great washer!! We only use the 19 min cycle due to water usage!
They make washing machine hoses with a right angle connector, the lowest profile ones look like they might fit for you.
Looks great! Safe travels! You might consider a timer switch (like for a spa) to run the water heater for a set number of minutes before it turns off automatically. Also, what about a 90° elbow for the washer or a quick disconnect fitting?
Hi y'all. I have been following you for quite a few years. Love what you do. Thank you so much for the trip. ❤
If you took the back panel off the washer you could plumb the waterline in lower. You can even use the fittings that are on the washer. Modify the top lid so it doesn't hit the plastic top of the washer, it will break. Those small washing machines work extremely well, being a top loader makes it easy to take a part and clean the inner drum a few years down the road. You can get a 115 Volt dryer to go with the washer that draws very little power. Nice install, always a thrill when you complete upgrades.
I remember dragging mesh laundry bags behind, then fresh water rinse and dry. Your washing machine is a huge step towards Civil living aboard. Love the mosquito netting, it came out perfect, nice job on the sewing machine which alone is a huge investment. Enjoy the Bahamas, can't wait for future episodes!
Awesome! Look forward to Bahamas too soon.
Look up and remove the balance sensor……….worked for mine.
Publix! Publix opens in Kentucky today. New store. 😊. Always love your videos and you two! Thank you.
I see a demand water heater and a horizontal washer in your future. Great video. All the best!
try spreading the load out in the washer . you put a heav1y item in with a pair of tracky pants . This will through most washers off balance .
Good job you guys, Always enjoy your videos. All I wish is that I was a little younger, To do what you're doing, A lot of work but a lot of fun. I hope you have favorable wind in your sails And that you are safe until next time.
Billy, I hope your water heater dip tube in not is the wrong spot, typically the dip tube is below the inlet water, but I also know you read ALL the info on the water heater so you should be good to go! Jetty is sure cute, she is getting some white chin whiskers which gives her an even more huggable mug!
I’m also concerned about heater position… trapping air in the top in that vertical position, location of relief valve , are electric elements totally under water, etc… I worry about stuff.
Water Heater relo & wash machine install = just more playtime for Billy! Sierra, it's okay as Billy really enjoys doing stuff on the boat and being highly productive. Although it is a guy thing, gals can participate as well. And you have stuff to do, too. It is a partnership1 Yeah. :¬) Webhead USA
Well done to you both; your provisioning, and getting ready for your trip you seem relaxed and calm. Well, that may not be the case the whole time, but the smiles on your faces, and the happy in your voices reflects how much Joy you get from it all.
Could you use a 90 degree fitting so you do not have to disconnect every time
Oh. Ok, it’s a washing machine. That makes more sense
Such an amazing couple!
Wow a washing machine, you beauty, Billy are you going to fit a low profile elbow to the washing machine inlet? You are one talented dude, no wonder Sierra is so confident with any task that arises. Take and live your work 🇺🇸
I would get a washing mashing supply elbow to lay on its side for a horizonal connection.
That is such a beautiful sailing vessel! You have earned it with your hard work.
Safe boating, congratulations again, love your work😊
Today is the 9th. Storms rolling through the east coast. Are you on the way to the Bahamas? Out of the way of the storms.??
Awesome! Very excited for you and this return to your 2nd home.
Maybe look into a right angle / 90 elbow that fits onto the top of the washing machine then you attach the hose to that (assuming space allows ) but then the hose would not be vertical and need to be removed
Your rings are beautiful!
Not sure if this has been said but a 90 degree elbow might help so you don’t have to continuously connect and disconnect the washing machine hose.
Billy your old washer looks fine. Is she broken?😂🤣😂🤣😂🤣😂
Hi guys, love to watch your channel and congrats to your new boat!!
As with your washing machine re-balancing, if you haven't got enough washing in the machine it may be difficult to balance.
Also, if you "just chuck" things in it can tangle things up somewhat, so maybe you have to fold them and put in "orderly".
Have lots of fun and fair winds on your way.
Great job guys. And... Harry Potter for the win!
Love your choice of beer , from the oldest brewery in the United States it was my favorite when I was drinking . I am also from Long Island . The black and tan is really good if you like a dark beer .
Fold a paper towel inside the vacuum bag.. that will absorb all the water so you get a better seal
The washing machines are great, we had a factory installed one on the 1260. They can be a little fussy, but once you sort it everything is good. Our co captain Therese determined that we should fold over our clothes and arrange them as we loaded so we could balance the load. You'd think it would move around as it washes undoing all that, but it didn't. It worked great. My washer at home is insane when it spins. I just jam foam around the sides. Seems to work.
I'm a more shove it out of the way kind of guy, so I'd suggest putting a piece of rope, with an alpine butterfly and just figure out a way to lift the hatch and end of the mattress out of the way, when you want to do a load, The loop with the butterfly gives you a lot of leverage. It's lot easier to re tuck the sheets then to undo and remake the bed.
Great screen. Brilliant. Going to steal that idea. Thanks.
I still miss mountain myst🥹💔
Just loving you guys
Fun episode and can see where provisioning/etc for a longer trip is exhausting but as we all know worth it! Hope your washing machine works wonders🇨🇦 ❤
Looking forward to the Bahamas!
Ready when you are...
I love watching you do this. I’m thinking you should’ve had it when you built it but the only other thing I don’t like is you think they would’ve put the water outlet on the side so it doesn’t stick up and you can leave it connected other than that well done I love you guys channel. I just think they make these washing machines, put the inlet on the very top of any machine on the side just a stupid opinion lol
Exciting! Use live bait to catch more fish. Get some Sabiki rigs to catch schooling bait fish. A light spinning rod to catch the bait and a medium spinning rod to send the bait down to catch your dinner.
Great vid, and a great insite into provisioning. Keep at it ❤it!
Looking forward to your sailing south videos. And to see you back in blue water.
Wow nice job on the screens.
Happy New Years 🎉❤
It has to have an equal amount of clothes around the entire drum maybe you have to load a few more things in there if everything's on one side that throws and in balance
Hope U get the washer 2 work. Safe travels ❤
I love watching you three! and your beautiful souls. But it seems that washer is the same size as a bucket, I can't hear your thoughts after a couple of loads, Great job as usual !!! good luck 🥰🥰
I’m surprised that no one has came out with a solar built in water heater. I know they make them for hikers and campers. Seems like someone could come up with something for sailboats.
If you flatten out the hamburger meat before vacuum sealing it, it allows easier storage and thaws out quicker.
I have that same sewing machine 😂. I’m not very fond of it; but it works 😅. ⛵️❣️
You should be able to find a 90-degree fitting for the washer. threads on the washer on one side and 3/8 hard plastic push lock on the other. Link the water supply to the fitting with 3/8 plastic water line, You will be able to leave the washer hooked up and be able to close the lid.
You should investigate relocating the fill connection to the right side of the washer.
Great episode! Your choice in beverages, Sweetwater 420, is spot on!😋😉
Weather update: 21°F. -6°C in Arizona overnight. Thanks for the tans and bathing suits! 😅
You must be close to me. Prescott. Yes nice seeing them enjoying the warmth.
Congrats Billy on installing Sierra's new washing machine. However, If I know washing machines, and I do, you WILL need to do some form of mounting or limiting mount around the machine so that when it spins it doesn't gyrate a little to starboard and impact on that pipe close to it. Let's face FACTS: washing machine loads RARELY centre/balance themselves perfectly. It may not do this when it's brand new, but as the machine ages it will be inclined to 'walk about' and may vibrate the pipe ends where it goes through the bulkheads cracking the joins, which will then necessitate the removal of the machine to fix the pipe. I'm not sure if a bracket like the one the water heater uses, or perhaps some fibreglassed locating pieces will be needed, but something will need to be fashioned to stop that machine from moving around.
Great work. I love your episodes! . Fair 💨's and Following 🌊's.
P.S. Ha ha, I just stopped the episode to make this comment and then the very next sentence when I restarted it was you saying what you were going to do to make it more secure. But I would not brace it to the pipe. Good luck!
It's the little things that make huge differences
We had the same problem with a high end home GE washer during its spin cycle. We even had the service rep come out and look at it. It was a top loader, and it would never balance. It cost over $700.00 at the time, we got rid of it and bought a Maytag.
I'm sorry to say, but you might be in for the same issue. It's not a leveling issue, the new machines are too sensitive to out of balance.
Just put a gasket strip under the door where your washing machine is and that should fix your problem.
Love Jetty
I'd say for the size of machine you have it looked like it was overloaded.
My home washer does the same thing, usually because I overloaded it with a bunch of bath towels. Spin cycle goes berserk and refills repeatedly. Try smaller loads. Good luck.
Portable clothes dry draw about 1300 watts, use 110v, and weight 60 lbs. 😎
Yeah.
Wellington is the best!
They make a 90° elbow that can stop the disconnecting of the water supply each time you use it. Check a plumbing supply house online.