Easy Stitch Max Sewing Machine Problems

Поділитися
Вставка
  • Опубліковано 8 лют 2025
  • How to fix thread jamming, breaking and breaking of needles. Thread Snarling. Mini Sewing Machine Problems. Fixing Portable Sewing Machine Problems. How to Adjust Tension on Thread. How to fix thread breaking. How to fix needle breaking. Common problems for portable sewing machine. Sewing Machine Does not Sew. Sewing Machine not working. Portable Sewing Machine not working. Portable Sewing Machine Does not Sew. Sewing for Begineers. Keimav 7-Stitch Sewing Machine. How to Fix Tension Problems. How to use mini sewing machine. Easy Stitch Max Tutorial. JML Sewing machine problem. Lazada Sewing Machine. Ace Hardware sewing machine.

КОМЕНТАРІ • 29

  • @joshmomo2917
    @joshmomo2917 Рік тому

    Hellomwhat type of SCHMETZ needle did you use? can you please provide us with the specifics of the needle

  • @erinlambert5449
    @erinlambert5449 2 роки тому

    hi, what if my needle goes to the left and back straight? (not forward or backwards) how do i adjust it to the center?

  • @trixievjimenez9707
    @trixievjimenez9707 5 років тому +3

    I followed all instructions on how to put bobbin and upper thread. I already pulled the bobbin thread but it just doesn't stich at all. It just makes stitch holes.

    • @Syarlyy0
      @Syarlyy0 4 роки тому

      same

    • @anavera2899
      @anavera2899 4 роки тому

      Am having all this problems and I did all that is on the video what should I do know

    • @elainesilva8634
      @elainesilva8634 Рік тому

      Eu também tenho uma desse modelo, tá igual a sua

  • @chelle5448
    @chelle5448 Рік тому

    Hello posible po bang mapalitan yung presser foot netong easy stitch max? At anong klaseng mga presser foot po ang pwede ?? New follower nyo po ako 😊 tinatry ko po paganahin ulit yung na stock na easy stitch max din po ng lola ko .. At dahil po sa vid nato napagana ko po ang laki ng tulong sobrang salamat po sana masagot nyo po ang tanong ko mam

  • @1993trish30
    @1993trish30 4 роки тому

    Is it possible to replace the presser foot? Thanks in advance.

  • @some1gotchedi
    @some1gotchedi 4 роки тому

    Hello! Can the presser foot be replaced?

    • @some1gotchedi
      @some1gotchedi 4 роки тому

      Pauline Ventor DIBA! Hirap na hirap na ako magtahi ng hem at garter pati mag overlock huhu pa reply naman if sumagot sila sa email !

  • @salazarlyka
    @salazarlyka 4 роки тому

    Hello, we have the same machine. But my needles are broken, what type or measurement of needle should I buy? Thanks.

  • @lidyadyms5977
    @lidyadyms5977 4 роки тому

    Can u please make a video on how to open n repair it

  • @nandininandini3043
    @nandininandini3043 4 роки тому

    Show me more videos of this problem

  • @leimasiylovete6897
    @leimasiylovete6897 3 роки тому

    Na ikot ko napo sya hangang sa pinakadulo at naiba ko narin po ung needle, bakit po nag kakaroon parin ng bunching ng thread sa ilalim?

    • @ringssewingchannel75
      @ringssewingchannel75  3 роки тому

      The thread tension might be too tight or bobbin placement at the bottom is incorrect.

    • @ringssewingchannel75
      @ringssewingchannel75  3 роки тому

      For more videos, please don't forget to like and subscribe! Thanks for watching! ❤️

  • @eveo2191
    @eveo2191 5 років тому

    Hi.. i just purchase a new one just like yours in this video.. kasi na adjust ko na yung tension pro ganun prin.. mukhang yung lower thread ang hndi tight ng tama.. panu ko kaya to maayos po?

    • @zoeyquinto3253
      @zoeyquinto3253 5 років тому

      Hi maam.
      Ok na po ba yung machine nyo?
      Ganyan den po kase problema ko. Pano nyo po naayos?

  • @itsaveryoldbook777
    @itsaveryoldbook777 4 роки тому

    how to fix the jam needle?

  • @lesliemarierances187
    @lesliemarierances187 4 роки тому

    Hi, nawala ko yung pin na pang wind ng bobbin.Ano po ang puwedeng ipalit sa bobbin winding pin na kulay itim?

    • @mitty4790
      @mitty4790 4 роки тому

      Hi. Same. Nawawala din pang wind ng bobbin ko. May napalit po ba kayo? Thanks