VW TRANSPORTER T5 HEATER RESISTER REPLACEMENT

Поділитися
Вставка
  • Опубліковано 5 жов 2024

КОМЕНТАРІ • 9

  • @johnbond8442
    @johnbond8442 5 років тому +1

    Great video, my blow heater stopped working and by removing the plastic fascia, I was able to access the regulator resistor, cabin pollen filter and blow heater motor housing. I replaced all three parts, and without your video, I wouldn't have known where to start. It gave me confidence to attempt the repair myself and thus, saved myself £££s on garage labour costs. The resistor was the first part I changed, but on closer inspection, the pollen filter was clogged with debris and some had gotten through to the motor, which caused it to clog up also. After replacing the parts, my blow heater is working perfectly. Thanks again.

    • @fionnp
      @fionnp  5 років тому

      thanks for the response. Great to know it helped.

  • @UkSupskater
    @UkSupskater 5 років тому +1

    Great video, thanks. As an addition, my shuttle t30 had a screw at the top of the storage net behind a clip on the drivers side, also the long trim piece is for the airbag, this pops off as shown but has a retaining net attached (to stop it deploying with the bag i guess) but just clips back in as shown.

  • @steveaskew2
    @steveaskew2 4 роки тому +1

    Cheers for posting this, managed to change the resister, fan now working, job's a good-un 👍

  • @chipsandcurrysauce9313
    @chipsandcurrysauce9313 5 років тому +3

    Re shoot the video and at the end say..
    Fan 1
    Fan 2
    Fan 3
    Fan 4
    FAN..TASTIC..😂😂👍

  • @firefighter1588
    @firefighter1588 4 роки тому +1

    Cheers mate

  • @commonsense2402
    @commonsense2402 3 роки тому +1

    Brilliant thanks

  • @terry4144
    @terry4144 Рік тому

    Ive had two go never known it on any other vehicle

  • @SANDRI550
    @SANDRI550 5 років тому

    In my van this keep going off every week do you know why the last time I even bought it from the dealer and still went off if you can help please