Van Fit Out - Using Templates To Get A Perfect Plywood Floor
Вставка
- Опубліковано 21 жов 2021
- Check out my new website thanks to Squarespace: www.theoffcut.co.nz
Head to www.squarespace.com/theoffcut to get 10% off your first website or domain.
The plywood I used: www.plytech.co.nz/transtex220
Special thanks to my Patreon members:
Andy Buck
Jason Haycock
Josh Hahn
_______________________________________________
My Tools:
Toughbuilt tool pouch: amzn.to/3tmFjBH
Dewalt table saw: amzn.to/3ackejR
Mirka Deros Sander: amzn.to/3e7CXAq
Makita track saw: amzn.to/3D7QXVp
Festool CT15 Shopvac: amzn.to/3xytwla
Countersink bit: amzn.to/33KaXOK
Music/Ear protection: amzn.to/3fKEb2l
Camera: amzn.to/31P9sfN
Router: amzn.to/2PFz5tu
Pocket hole jig: amzn.to/3a9E3s0
Mechanical pencil: amzn.to/3acH9LH
CA Glue: amzn.to/2NvFE49
(Get 15% off using promo code "OFFCUT15" at www.starbond.com/?rfsn=296018...)
_______________________________________________
Get my plans: gumroad.com/theoffcut
Merch: teespring.com/stores/the-offcut
Instagram: / theoffcut_nz
Facebook: / theoffcut
Support me on Patreon: / theoffcut - Навчання та стиль
really nice work bro really tidy
that was so tight, so perfect, and such a good watch. it should be in an "oddly satisfying" compilation somewhere.
First class job! Looks very good in there!
Well done. This looks exceptional.
Nice, very tidy. The sped up tool sounds are weirdly relaxing 😆
They really are! Its my ASMR
A neat and well done job.
Excellent work
Thanks!
You’re clever man!
Nice video, well shot and narrated. Clean build. Smart you left one side wide, then cut to fit. Mahalo for sharing! : )
Thanks! Always look forward to seeing your comments :D
kiwis and hiaces, combo made in heaven. Do you know of Scott Brown by any chance?
In US I haven't seen cargo vans with such big windows
I have a hiace like this for my flooring business in the wairarapa and I built a whole subfloor for my tools. I reckon you would have done a way better job than me though haha.
I put a new floor (18 m Ply) in my Mercedes Sprinter LWB. I used the existing ply floor as a template. As the fit of the Mercedes floor was "loose" I increased its width by 15mm. Which worked fine. I failed to notice the looseness in the longitudinal existing ply floor. Hence I have 15mm gap behind the rear wheel arch. (I can live with it). What I found interesting was I extended my new floor right to the front seats and there was a 10mm parallel difference between the seats boxes and the rear of the van. No the van has not been in an accident. The original floor stopped short of the front seats.
Dude - that fit! How did you locate the cutouts for the anchor points so accurately? .... did you cut holes in place on the paper version? In any case ... 😍
Cheers Rob! Yeah I had it cut out on the paper template first. Just kept cutting away until it looked good and gave it a bit of tolerance all around when I cut it out on the plywood in case I was slightly off. Turned out good!
@@TheOffcut It *did* turn out good. Have to admit I let out a wee wtf when I saw how huge that oversize sheet of ply was compared to a normal one :)
@@TakamiWoodshop Hahaha I had the same reaction when it arrived! Was not expecting it to be THAT big....
🤙
Great job, did you just leave it in loose or use some sort of adhesive to hold it down?
Thanks. It is not glued down. The weight of itself and snug fit is enough to keep it from moving around and can be taken out if it ever needs to be replaced
You missed mentioning that you ALWAYS wanna lay the 'building card' curls down so it's not able to roll itself up all the time.
Hahaha yeah learnt that the hard way… You could see all the tape on the other end where I tried to keep it down as I rolled it out haha
Curious how many hours did this take
An afternoon. Maybe 2-3 hours
2’40” “It was a bit stressful & wet”… if that was my home, it translates too: “My wife “helped” and there were tears”.
А зачем? Точнее для чего это было делать?
Buy a van!
Need money!
@@TheOffcut Here's some money for you 💰💰💵💵