Cool video Josh. One other thing you might consider in the future for diagnosing any engine for a catastrophic failure is cut open the oil filter and open the paper to check for metal. We have used it for years works for quick theories
Even on this early video You Josh showed your honesty and integrity by asking viewers about the mysterious bolts that perplexed you 🙌 Never tried to be a know it ALL ,Not a Rip-off mechanic that would have just Replaced EVERYTHING ⁉️ I thought I heard a young Ralphie in the background giving this "Sleeper" just a hint of your getting in the groove as you gained more experience and confidence in your Utube video presentations 👏👍🙌💯💥 When you started including Tosh ,Squeezy,WaWa, Ralphie and the Main Man "ROCKY" IS WHEN YOUR CHANNEL BECAME A MUST SEE FOR ALL SLEEPERS EVERY WHERE🤗😎 NOW IN OCT 2022 LIKE GRACIOUSLY STATE YOU AND FAMILY ARE LIVING YOUR DREAM AND WE ALL JUST APPRECIATE IT SO MUCH 💯
Great video, the first of your older ones I've watched. The production quality on you newer videos is much better plus we now get all the family interaction.
Damn. The sounds were true indicators this time, eh? Figured they might be with the oil pressure taking so long to get there and it being low, but I kept my fingers crossed. Amazing how quick and totally an engine will kill itself from someone not being quite so thorough or careful with the torque settings. Then again, I've had bearing roll on engines that have done 230,000 miles and not having shown a hint of trouble or a possible reason before just doing it. On to the next....!
the bolt holes in the front are for the timing chain damper part number 12588670 that looks like a later model block because of the afm oil passages in the valley
1st time im watching josh.great vids amd very detailed and clear on what your doing josh.i will be a new subscriber.btw I will be doin the same thing to my 6.0.lq4 really sucks to
Good video man. Man that suck that the bearing spun out. I remember when I spun my main bearings in my Mustang. Was the GTO car yours or was it someone car that you was working on?
Cool video Josh. One other thing you might consider in the future for diagnosing any engine for a catastrophic failure is cut open the oil filter and open the paper to check for metal. We have used it for years works for quick theories
Even on this early video You Josh showed your honesty and integrity by asking viewers about the mysterious bolts that perplexed you 🙌 Never tried to be a know it ALL ,Not a Rip-off mechanic that would have just Replaced EVERYTHING ⁉️ I thought I heard a young Ralphie in the background giving this "Sleeper" just a hint of your getting in the groove as you gained more experience and confidence in your Utube video presentations 👏👍🙌💯💥 When you started including Tosh ,Squeezy,WaWa, Ralphie and the Main Man "ROCKY" IS WHEN YOUR CHANNEL BECAME A MUST SEE FOR ALL SLEEPERS EVERY WHERE🤗😎 NOW IN OCT 2022 LIKE GRACIOUSLY STATE YOU AND FAMILY ARE LIVING YOUR DREAM AND WE ALL JUST APPRECIATE IT SO MUCH 💯
Great video, the first of your older ones I've watched.
The production quality on you newer videos is much better plus we now get all the family interaction.
1120 and not a DROP on his toes !! Most excellent my man !!
Thank you
Sounds like you got to it just in time! Nice job josh. You are a good mechanic.
KNOCK...KNOCK..IT'S UNCLE RODNEY AND AUNTY LIFTER!!!
That’s right
Damn. The sounds were true indicators this time, eh? Figured they might be with the oil pressure taking so long to get there and it being low, but I kept my fingers crossed. Amazing how quick and totally an engine will kill itself from someone not being quite so thorough or careful with the torque settings. Then again, I've had bearing roll on engines that have done 230,000 miles and not having shown a hint of trouble or a possible reason before just doing it. On to the next....!
Yes
the bolt holes in the front are for the timing chain damper part number 12588670 that looks like a later model block because of the afm oil passages in the valley
Thank you I was wondering
Timing chain guide bolts there
Cool video Josh. I like it of engine shows!
Great job on these videos!
Thanks bff , trying to show stuff I Never used to film
@@Sleeperdude I need to get me a camera person.
I feel like this is the first real video that lead to where you are today.
A plastic timing chain tensioner and or guide bolts there, dosnt need it but should replace anyway.
When I was working on cars the first thing I did was a compression check
Yeah that’s good
Hi i am Pieter Justin theron and I am from South Africa and I like r cars
1st time im watching josh.great vids amd very detailed and clear on what your doing josh.i will be a new subscriber.btw I will be doin the same thing to my 6.0.lq4 really sucks to
Awesome! Thanks for watching
MARK CEN CAL CHECKING IN I thought the car was a mustang shows how much I know🤣
That’s funny
@@Sleeperdude YEP IM A FUNNY GUY JUST LIKE YOU
Aways enjoy your videos.
Thank you
Good video man. Man that suck that the bearing spun out. I remember when I spun my main bearings in my Mustang. Was the GTO car yours or was it someone car that you was working on?
It was mine I sold it because of transmission problems
@@Sleeperdude oh okay.
Spot on video josh
Thanks 👍
Caught just in time before major damage
Yep
Awesome
Thank you
Josh do you know that the gto is a general motors Holden Australia car exported to America
Yes
and the fun continues!
Yes!!!
Was there a follow up video ?
Cant find it..
Finally a good GM product instead of an ugly fairmont
🤣🤣🤣🤣
Any video of this engine making noise before y'all got into it?
Yes should be a playlist
Love the black gto save yourself time and trouble I'll trade you a Ford truck or a Ford Falcon for it
Sorry man already sold it
My L99 is exactly the same ) I overhauled heads and clicking noise comed on
who ever put that together watched too many sloppy mechanics videos. lol
if it's pinging and knocking maybe 93 octaine mine is a 2006 and i have no problem with mine and it has 109 grand on it
Ok great thank you
gt zero is a first for me😂😂😂😂
He hear it bad
🤣
Nice bro
Tell me you linehoned that block ?
No
YOUR COOL AND ALL BUT where are the kids
🤣🤣🤣🤣
These are bushings, idk why they're called bearings 🤷♂️ anyone know why?
💯👍🙏
I thought it was going to be spun main by how it sounded in the 1st videa
Some one bought a short block and used the crank without replacing using it's berrins maybe
when is the Turbo kit getting installed? :P
I don't know maybe one day
When did you get a goat? Not rocky the car
Sounds like a Ford driver had that car and didn’t change the oil enough
Probably
Please sell me the gto.
9
What happened to your account on telegram???
I don’t have a telegram account that was a scammer not me
❤ sucks
Not how you do it