Auto Siphon - Mead Making Basics
Вставка
- Опубліковано 5 жов 2024
- Come join The Mead Hall Discord, home to over 1000 mead makers: / discord
Check out my other social media:
TikTok - / sammakingmead
Instagram - / sam.making.. .
Twitter - / sammakingmead
Facebook - / sammakingmead
Credits:
Sunny (Song) - bensound.com
Thank you! Super clear instructions without any sediment/waffle ;)
If the last thing you syphoned had solids, remove the bottom part for inspection and clean out if needed before sanitizing.
So…. I ended up breaking my auto siphon because I couldn’t get the tubing off. Even after The piece broke, I still couldn’t get the tube off so I just threw it all away. Any suggestions on how to remove the tubing safely??
Every pump send a pump of air back into the mead stirring the lees. What am I doing wrong please? Or do I have a broken siphon? Cheers
concise!
Knowledge 😁 🤘🍺
I see the receiving container has had some bubbles in there? I take it is from the sanitizer and if so how much would be acceptable? Or is it just more of a "get most of it out" type thing?
As long as it's not a puddle, it's all good. This is only the case if you follow the no-rinse dilution rate, though!
My syphon ends up with a small bit of liquid inside it that shoots out the top, how does that happen?
Bad seal, I recommend picking up a new one 🐝
Tripod💅