Bachin 1720 Laser Unboxing and first engraving

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 13

  • @KaliBlaz
    @KaliBlaz 2 роки тому

    mine does not work i have tried everything 😒 the laser does not do anything.

  • @darren3837
    @darren3837 3 роки тому +1

    Engraver or Engrave Master software is causing all kinds of grief. Some projects I have done work out ok, but there always seems to be a glitch. I would never trust this engraver to go directly to a project without testing the entire burn prior to engraving on the actual item. Even then I'm wary as I've had the engraver stop in the middle and had to re-sand to get the surface prepped again. Project loads ok into the Engrave Master software, adjust all settings as described and test size, start burning and then part way through the laser just stops. Software does not install like normal apps as it doesn't show up in the app's section of control panel. Reinstalled, but not sure if it's even reinstalling cause you can't uninstall first. I've used engravers many times before at work and this should be dead simple and the machine is making it a nightmare to work with. Not sure if it's the software or or laser that's the problem. The key is it starts to burn and then just stops....Unless this can be fixed I cannot in good faith recommend this unit to anyone or provide a positive review since the machine is only a few months old and has probably done less than 15 small jobs

  • @hamadaali5687
    @hamadaali5687 3 роки тому

    can you engrave on transparent acrylic with this machine ???

  • @camalek
    @camalek 5 років тому +1

    Hi, pls can you recommend me some 3w and 5w laser head for Bachin D8 4050. on Ebay... THX!!

  • @elmarcianodenny
    @elmarcianodenny 3 роки тому

    Seems this is a dead end laser engraver. The lack of support once you get it is as I see for everyone, I thought it was me. The freaking engraver moves correctly to the right (+X) but when moving to the left (-X) it cracks and moves way less than it should. 1 month and still cannot get a decent answer. Anyone here knows why it is doing this?

    • @bachinmaker6004
      @bachinmaker6004  3 роки тому

      Could you please sent a video (show the issue clearly )to this email:yvon_gong@hotmail.com

  • @SuperDJMoJo
    @SuperDJMoJo 5 років тому

    Can you engrave metal with this? Maybe a metal USB-Stick or something.

    • @bachinmaker6004
      @bachinmaker6004  5 років тому

      dear friend, you need 7W laser for engrave metal.

    • @bachinmaker6004
      @bachinmaker6004  5 років тому +1

      Engraving on metal need the laser power 7000MW

  • @MrMeromillos
    @MrMeromillos 5 років тому

    What software??

  • @bigbox181
    @bigbox181 6 років тому

    ครับ รุ่นเดียวกันแต่ Driver ไม่สมบูรณ์ ขอคำแนะนำหน่อยครับ Loadที่เว็ป 8kdz.comไม่ได้