👉 NEW F1 ULTRA MY NEW FAVORITE: bit.ly/F1UltraUSA 👉 xTool F1 US Store: bit.ly/3uaPs8Y UK Store: bit.ly/47BxA5O EU Store: bit.ly/46k7VNE CA Store: bit.ly/xToolF1CA FR Store: bit.ly/xToolF1FR DE Store: bit.ly/xToolF1DE If you are going ALL OUT go with THIS xTool P2 & F1 Bundle (Save $$$) US: bit.ly/xToolBusinessDuoUSA EU: bit.ly/xToolBusinessDuoEU UK: bit.ly/xToolBusinessDuoUK
I would like to see this same video with a few updates to it like showing the settings being used and the after engraving tumblers cleaning view I guess you could say it’s a step by step video from start to finish as far as I know no one on UA-cam does a start to finish showing the whole process in detail it would be nice if someone would start this trend I’m sure it would be a lot of work but I think it would be worth it more especially to your viewers
Mike Smerka's Photo Engraving Course I Recommend: www.diodedesignsllc.com/product/PhotoEngraving4232024/43?cp=true&sa=false&sbp=false&q=false&category_id=B56ZPZIQIDPBUJTA2LATZUW5
Witam. Widać, że materiał sponsorowany. Jedno ważne pytanie: Skąd maszyna ma wiedzieć jakiej mocy ma użyć by była ona odpowiednia dla danego materiału i by nie było np przepaleń ? Pozdrawiam.
I really wanted to see you wash that Tumbler to see if it really came out like the other lettering that you have on your tumbler I would have been sold on the F1 if it came out as clear as silver underneath
Mate can you advise where to buy the raw materials (metal business cards, wood keychains, etc) from ? Need it for setting up a small business hence the price needs to be sustainable.
Wow, I used my 2.5W laser on the 3018 for the first time yesterday, coaster image took 45mins. These would be great at markets, engraving on the spot. And then you just mentioned going to Craft show, yep, $$$$
@@babbagebrassworks4278, sorry, I misread your quote. I thought you were saying your F1 took 45 minutes. My experience so far has also been with the slower stepper motors (on 15 and 100 Watt CO2 lasers), but obviously with biggers "beds" than the F1 which is also nice to have in some instances. Recent work has focused on burning small-ish (maybe 3.5" square) powder coat off vacuum tumblers with a 15 watt CO2 laser and it takes a painful 12 minutes to do the burn. I'm trying to understand even if the galvo itself (the movement of the beam) is faster, with such short "dwell time" on each "pixel" of powder coat paint, if the laser is moving hyper fast, we it truly fully burn the paint? I have to slow the 15 watt CO2 to about 15% of its max speed to get a proper burn and I'm not clear if the faster speed of the galvo will even come into play in this application if the optical power is only 12 watts...
I know that it will probably go unanswered since this video is a couple of months old, but can the "cutting" laser cut a 90⁰ vertical edge around an outline? With the emitter being in a stationary position, one would assume that any edge cutting that isn't directly below the emitter would be at an increasing angle the farther from the center it gets.
Hi, I bought this bc I made handmade jewelry and I wanted to add my logo tags but they are really small and I want to do like a big batch at the same time, do you know how can I do that?
Probably not with this machine as you have to deal with one item at a time. But with the speed of this machine you can probably knock out a bunch in one hour. But if you don't mess with that, you most likely need the M1 or S1 series
I commented on one of your previous videos today, where you showed us how you made those beautiful pictures with the S1 20W. Can you do the same with this machine?
enjoyed your video! I would like to create Christmas ornaments and cards for friends and family and especially for my grandkids. I am intrigued by ability to engrave thermos, etc. as well.
I’m looking to buy one for my wife. What shipping dates you get? I seen on another post that they keep delaying shipments. Did you experience the same thing?
not many pros but quite a few cons 1. It's extremely pricey around around vehicle prices. ranging from $1,500 to $10,000 2. It's highly dangeroud should you place your hand underneath that laser. 3. Leave the engraving to the industrial pros.
Love your presentation. I just tried the link which took me to x-tool's website and the product was selling at $1400 USD which is roughly $2150 AUS , but then I changed the dollar from USD to AUS , which rebooted the Web page and the price was over $6000 AUS .. so I'm very confused about the pricing.??? Any ideas as to why. Cheers Roy
I bought the d1 pro 20w with the IR add on head as a package and ive got to say I’m not impressed with the IR it’s sooo slow and very hit and miss to if it marks or not , maybe it’s me but I’ve seen others say the same
Im listen .. I don't think that you get perfect results for Metals like stainless, silber or gold. This is very weak for this material. They newer say something about metals on this Video.
I would have loved an F1 but purchased a D1 Pro 20W earlier in the year with all accesories.. Had they actually offered payment plans for people outside the US i may have considered also getting a F1 as it is super fast.
The D1 Pro is an amazing machine. At some point in the future you may want to look at getting the 2W IR diode for it. It will have the same power of the one you see here and will save you $$$
If you use black tempura paint on the glass, yes. Only C02 laser can engrave glass without a medium. The wavelength of the diode laser can’t etch the glass without paint.
I appreciate the comment man! But.. so you know I don’t spend 40+ hours filming and editing for a 14 minute “marketing” video. This is a tutorial/review video. And yes, I did. Almost every UA-camr you seen had theirs for free before the release. Just because I receive something free doesn’t keep me from 100% honesty with my subscribers. The video production I made in this video far surpasses the amount that the laser cost. If something I found negative about the laser (which I did) I stated in the video 👍🏻
Why they couldnt make a mobile app like laser pecker. If its portable. It should be take on the go. Dont want to travel with my pc or carry a laptop. To much weight. Both laptop and laser. I rather just walk with the laser and use my phone.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
👉 NEW F1 ULTRA MY NEW FAVORITE: bit.ly/F1UltraUSA
👉 xTool F1
US Store: bit.ly/3uaPs8Y
UK Store: bit.ly/47BxA5O
EU Store: bit.ly/46k7VNE
CA Store: bit.ly/xToolF1CA
FR Store: bit.ly/xToolF1FR
DE Store: bit.ly/xToolF1DE
If you are going ALL OUT go with THIS xTool P2 & F1 Bundle (Save $$$)
US: bit.ly/xToolBusinessDuoUSA
EU: bit.ly/xToolBusinessDuoEU
UK: bit.ly/xToolBusinessDuoUK
This was encouraging to see a photorealistic engraving on the business card in less than 2 minutes. I thought these took 10x longer to do.
Yes, It still amazes me!
Hey Matt you the real deal dude, whether with or without a giveaway, hanging out with you is always a win, bro!! Thanks for your support and effort.
I would like to see this same video with a few updates to it like showing the settings being used and the after engraving tumblers cleaning view I guess you could say it’s a step by step video from start to finish as far as I know no one on UA-cam does a start to finish showing the whole process in detail it would be nice if someone would start this trend I’m sure it would be a lot of work but I think it would be worth it more especially to your viewers
Mike Smerka's Photo Engraving Course I Recommend: www.diodedesignsllc.com/product/PhotoEngraving4232024/43?cp=true&sa=false&sbp=false&q=false&category_id=B56ZPZIQIDPBUJTA2LATZUW5
How do you know how much power and speed to use? Ie how deep or dark the engraving will be?
You do all that from the free software that you download from the website
You're great and honest...thanks a lot
I appreciate that!
Great work Cornelius! Top notch video as always!
Thank you, Chad! I’m a big fan of yours bro!
Witam. Widać, że materiał sponsorowany. Jedno ważne pytanie: Skąd maszyna ma wiedzieć jakiej mocy ma użyć by była ona odpowiednia dla danego materiału i by nie było np przepaleń ? Pozdrawiam.
I really wanted to see you wash that Tumbler to see if it really came out like the other lettering that you have on your tumbler
I would have been sold on the F1 if it came out as clear as silver underneath
That's exactly what we were waiting for too. Guess we just have to try ourselves.
Sorry I should have done this, yes it is shiny after you scrub it with a magic eraser brush!
It is shiny after you wash it with a magic eraser. I should have shown this.
I just got the LaserPecker 4 and this looks so similar! I love these little lasers! Thanks for sharing
great review! I needed this.
So glad it helped!
Can you emboss on a larger surface such as a table top, by removing the base plate
Can you use sterling silver and gold filled ?
We learned you do love Bella... And the laser of course! 🙂 Thx for sharing this man, awesome product! ♥
KR from Austria
What size is that tumbler
I have a new grandson named “Archer.” I wanna make something for his bedroom wall that goes with his name.
Man that was impressive I would be engraving anything that fit in the machine.
We want to know how effective it is in silver
Mate can you advise where to buy the raw materials (metal business cards, wood keychains, etc) from ?
Need it for setting up a small business hence the price needs to be sustainable.
Will it do coloured letters and logo.
Wow, I used my 2.5W laser on the 3018 for the first time yesterday, coaster image took 45mins. These would be great at markets, engraving on the spot. And then you just mentioned going to Craft show, yep, $$$$
45 min or 45 sec?
@@chammockutube Galvos are faster, my 3018 uses threaded rods n stepper motors
@@babbagebrassworks4278, sorry, I misread your quote. I thought you were saying your F1 took 45 minutes. My experience so far has also been with the slower stepper motors (on 15 and 100 Watt CO2 lasers), but obviously with biggers "beds" than the F1 which is also nice to have in some instances. Recent work has focused on burning small-ish (maybe 3.5" square) powder coat off vacuum tumblers with a 15 watt CO2 laser and it takes a painful 12 minutes to do the burn. I'm trying to understand even if the galvo itself (the movement of the beam) is faster, with such short "dwell time" on each "pixel" of powder coat paint, if the laser is moving hyper fast, we it truly fully burn the paint? I have to slow the 15 watt CO2 to about 15% of its max speed to get a proper burn and I'm not clear if the faster speed of the galvo will even come into play in this application if the optical power is only 12 watts...
Impressive tool. That is incredibly speedy. You showed things that COULD be done with it, what do you envision yourself using it for at time goes on?
For US, we are going to be use it for our crafts shows, haven’t got ours in yet but we will use it mainly for wood products and leatherette.
It would be nice to see what the Tumbler actually looked like after washing it, maybe it did not look to good?
After a scrub with a magic eraser it looked great
@@CorneliusCreations sure.
Why wouldn’t it look good
@@NYBwilk because you're unwilling to show it.
would be nice to see the settings you use.
how about to test 55W laser Coolook Creator 1 ?
What was the settings that u use for business card and the dogs
Will this work on wool felt hats?
do you need the safety glasses when framing?
Since it is such low power I don't use mine when framing, but others might!
@@CorneliusCreations ok thank you.
Really wanting one. I love buying from Kim and Garrett . Yet it would be nice to make my own.
Dude, thank you so much for this! Gonna get one for sure!!❤
Awesome to hear! I know you will love it!
I know that it will probably go unanswered since this video is a couple of months old, but can the "cutting" laser cut a 90⁰ vertical edge around an outline? With the emitter being in a stationary position, one would assume that any edge cutting that isn't directly below the emitter would be at an increasing angle the farther from the center it gets.
On the tumbler, why does the word mandalorian look so dark compared to the other engraving on the tumbler?
Hi, I bought this bc I made handmade jewelry and I wanted to add my logo tags but they are really small and I want to do like a big batch at the same time, do you know how can I do that?
Probably not with this machine as you have to deal with one item at a time. But with the speed of this machine you can probably knock out a bunch in one hour. But if you don't mess with that, you most likely need the M1 or S1 series
Fantastic demo and tool! Wow!!
Glad you enjoyed it!
I commented on one of your previous videos today, where you showed us how you made those beautiful pictures with the S1 20W. Can you do the same with this machine?
What is the resolution of this model and the F1 ultra?
enjoyed your video! I would like to create Christmas ornaments and cards for friends and family and especially for my grandkids. I am intrigued by ability to engrave thermos, etc. as well.
xTool F1 is really a nice machine, I have one and have fun with it
most excellent demo I have seen: question: it doesn’t have Air Assist? if not how clean the leather cuts are? thank you!
Wie bekomme ich ein Foto ins Programm? Muss ich das umwandeln?
can you tell or provide a link to a video that shows how fast it can cut paper or card 300gms please ?
We use our Fiber laser at crafts shows now waiting on our F1 to come in we are already to buy 3 more if everything works well.
I’m looking to buy one for my wife. What shipping dates you get? I seen on another post that they keep delaying shipments. Did you experience the same thing?
@@jzuniga633 No shipping dates as of yet, still waiting. If she loves it she should look at a fiber laser as well. Will your wife be doing videos?
Could you do a pros and cons of this vs the s1 as a first laser purchase?
not many pros but quite a few cons
1. It's extremely pricey around around vehicle prices. ranging from $1,500 to $10,000
2. It's highly dangeroud should you place your hand underneath that laser.
3. Leave the engraving to the industrial pros.
What is the speed and resolution??
Hi guys, where can I find the eagle and dogs files to play with the laser? Thanks
Love your presentation. I just tried the link which took me to x-tool's website and the product was selling at $1400 USD which is roughly $2150 AUS , but then I changed the dollar from USD to AUS , which rebooted the Web page and the price was over $6000 AUS .. so I'm very confused about the pricing.??? Any ideas as to why.
Cheers
Roy
I would love to have this, and I would use it all the time to make extra money. I am 62 and on a fixed income and love making crafts to sell.
I bought the d1 pro 20w with the IR add on head as a package and ive got to say I’m not impressed with the IR it’s sooo slow and very hit and miss to if it marks or not , maybe it’s me but I’ve seen others say the same
Hey what settings is used for engraving on the stainless utensils?
Im listen .. I don't think that you get perfect results for Metals like stainless, silber or gold. This is very weak for this material. They newer say something about metals on this Video.
Anyone have a link a review that actually tests on raw aluminum?
Oh that would be awesome.
Software work on Mac?
It sure does. I use it both on windows & Mac OS.
There is now an F1 Ultra.
I would have loved an F1 but purchased a D1 Pro 20W earlier in the year with all accesories.. Had they actually offered payment plans for people outside the US i may have considered also getting a F1 as it is super fast.
The D1 Pro is an amazing machine. At some point in the future you may want to look at getting the 2W IR diode for it. It will have the same power of the one you see here and will save you $$$
@@CorneliusCreations Thank you that is very good advice.
I would love to have an F1 for engraving coins and other metal objects. Thanks!
With a XTool F1, I would like you to emboss different materials & teach kids the art of engraving for school & art projects
I would love to know how to talk to someone about this tool. I have tried multiple times to contact them with no response. This concerns me.
How do you determine power settings without wasting a bunch of product? I tried one preset and burned right through the item.
This is where the test grids come in handy, they give you a very close starting point
How is the X tool F1 laser ? Is it still going strong?
It sure is! Im still using it and still plan on using it!
Can you power this laser with a power bank? Or does it need to be plugged into a wall to use?
Hey there, this will work with a powerful enough power bank.
Does it actually engrave metal or does it mark??
Depends on the material but it’s more a mark
This would be great to make items for my church
Does this engrave glass?
If you use black tempura paint on the glass, yes. Only C02 laser can engrave glass without a medium. The wavelength of the diode laser can’t etch the glass without paint.
I’m sold and want one.
It's honestly my favorite laser from xTool. I used it this week for all kinds of projects.
I LOVE mine!
Why my Cricut won’t connect
322 Rippin Trail
I would carve a picture of me and my husband who just passed away in july.
What is the maximum space for engraving?
100mmx100mm I think but it also has extensions, maybe Cornelius can help with specifics.
I would engrave my carvings
1500 for something so small in what it can engrave is that for real, its a sick bit of kit but jesus that price
Do you think you could engrave chocolate?
Cool, probably how crop circles are made - man made lasers in space, not aliens.
No negative comments...LOL! Of course, they gave it to you for free. Let me guess...the P2 you have was also free.
Nice marketing video.
I appreciate the comment man! But.. so you know I don’t spend 40+ hours filming and editing for a 14 minute “marketing” video. This is a tutorial/review video. And yes, I did. Almost every UA-camr you seen had theirs for free before the release. Just because I receive something free doesn’t keep me from 100% honesty with my subscribers. The video production I made in this video far surpasses the amount that the laser cost. If something I found negative about the laser (which I did) I stated in the video 👍🏻
@@CorneliusCreations LOL! The negative you came up with is that it doesn't come with a bag?!? LOL!!
What if you needed something bigger
491 Leonora Prairie
This thing costs twice what a D1 Pro 20W does and has a tiny engraving area. WTF. You could buy a D1 Pro AND a 40W CO2 ebay laser for this price.
664 Tomas Divide
I checked the price, and nearly had kittens. If it was 10x cheaper, I'd save up and buy one.😢
Not sure what you were expecting it to be? $500 for an ultra portable laser engraving machine? But it's on sale atm
What a ridiculous comment.
@@limitedhangoutlive it's actually au$2500
❤
I have the f1 and had a horrible customer service experience. I love the fiber lasers but will never buy xtool again.
Why they couldnt make a mobile app like laser pecker. If its portable. It should be take on the go. Dont want to travel with my pc or carry a laptop. To much weight. Both laptop and laser. I rather just walk with the laser and use my phone.
They do have a mobile app.
Robinson Deborah Smith Laura Harris Patricia
Gonzalez Michael Martin Karen Robinson John
Just horrible customer service
Is it really? I'm trying to decide between this or Roly.
Davis Susan Wilson Dorothy Clark Charles
Oof
Yippee Skippy it is too small to be any use of anything real give me a break guy
Walker Joseph Jones Scott Jones Kenneth