Very good modification🎉. I build the inside too,now i have the choice,searching 8 "not to expensive" servos for the plane😅...2 less servos are better👍.even for the rx channels😏(8 is easy,,but 9🙄) But ok,,im very curious to fly it😁
Thanks for your comment👍 About the servos i used 6 EMAX E508MAII (not original) spending about 33€ (total) on Amazon. They works well and the only limit is in the precision that is not very good but for a "slow" model like this, it's really acceptable. In this way i'm using a 7CH RX and this is good because the space inside the fuselage is quite "small". If you decide to use only 2 servos per wing, just pay attention to "line up" the 2 piece ailerons on the external section to prevent movement problems (this is achieved lining up the 2 traling edges when you glue the original middle wing section with the external one). Last advice: with a 850KV brushless motor is better a 10x6 propeller instead of a 9x6. Happy flight!🛩
@@iwilz9043 thanks for your answer👍. Hehe,,33€ vor servos is not too much😅...im between the chaservo ds09(but for 8 it would be 300€) and the torcster NR-65MG digital(180€ for 8 pieces) will see🤷😅. I glue it together 3month ago,so i cant change the angle from the wing without cut into.i think about "how i can do this with only 2 servos left and right🤔...maybe not. .when i take the 2 channels for the inner-flaps(brakes) together,and rotate one servo,i can use 8 channel RX,thats ok👍(i unse frsky/kavan v20 now,and there is no 9channel reciever😅.before i was by multiplex/profiTX)... Maybe the next 2-3 weeks i make him ready and make my first flight with it.(Only servos and motor must be installed to finish)...🥳😃 I wish you a nice summer saison and many good flights🛩️
@@iwilz9043 jeah🥳. Jes,the old mc-24 is a very good radio,with very good gimbals👌. Im by multiplex and use a old ProfiTX (from the 555edition,the first radios from the profiTX series,15years old)she work Perfect,never feel better gimbals🙏🥳i love this radio😅.. "New" is not better everytime☝️😃.
@@gillesgaridel9860 apart from the different number of servos (and also of RX channels) the difference is much more aesthetic than functional. If you will do the same, just pay attention because when eliminating the dihedral, in the same time you must also ensure that the ailerons of the middle section has to be aligned with the external section of the wing. This is simply obtained by fixing the single wing on your working table and checking that the ailerons of 2 sections form a straight line.
Very good modification🎉.
I build the inside too,now i have the choice,searching 8 "not to expensive" servos for the plane😅...2 less servos are better👍.even for the rx channels😏(8 is easy,,but 9🙄)
But ok,,im very curious to fly it😁
Thanks for your comment👍
About the servos i used 6 EMAX E508MAII (not original) spending about 33€ (total) on Amazon. They works well and the only limit is in the precision that is not very good but for a "slow" model like this, it's really acceptable. In this way i'm using a 7CH RX and this is good because the space inside the fuselage is quite "small".
If you decide to use only 2 servos per wing, just pay attention to "line up" the 2 piece ailerons on the external section to prevent movement problems (this is achieved lining up the 2 traling edges when you glue the original middle wing section with the external one).
Last advice: with a 850KV brushless motor is better a 10x6 propeller instead of a 9x6.
Happy flight!🛩
@@iwilz9043 thanks for your answer👍.
Hehe,,33€ vor servos is not too much😅...im between the chaservo ds09(but for 8 it would be 300€) and the torcster NR-65MG digital(180€ for 8 pieces) will see🤷😅.
I glue it together 3month ago,so i cant change the angle from the wing without cut into.i think about "how i can do this with only 2 servos left and right🤔...maybe not.
.when i take the 2 channels for the inner-flaps(brakes) together,and rotate one servo,i can use 8 channel RX,thats ok👍(i unse frsky/kavan v20 now,and there is no 9channel reciever😅.before i was by multiplex/profiTX)...
Maybe the next 2-3 weeks i make him ready and make my first flight with it.(Only servos and motor must be installed to finish)...🥳😃
I wish you a nice summer saison and many good flights🛩️
@@Rantanplan-0815 make a video of a flight of your Inside when finished and let me know!
@@iwilz9043 jes i do👍
Klidný pohodový větroň........paráda.
yes it is 🙂
I see you fly still with mhz 👍very cool😊
Yes i love my old MC24 and (having also 8-10 RX) for me is really enough for the rest of my life🥰
@@iwilz9043 jeah🥳.
Jes,the old mc-24 is a very good radio,with very good gimbals👌.
Im by multiplex and use a old ProfiTX (from the 555edition,the first radios from the profiTX series,15years old)she work Perfect,never feel better gimbals🙏🥳i love this radio😅..
"New" is not better everytime☝️😃.
It looks like you removed the diedre from the external panels. Is it correct ?
yes you are right, it's a quite simple modification and then you can use only 2 servos for each wing instead of 3☺
THANKS. Did this change the flight of the model?
@@gillesgaridel9860 apart from the different number of servos (and also of RX channels) the difference is much more aesthetic than functional.
If you will do the same, just pay attention because when eliminating the dihedral, in the same time you must also ensure that the ailerons of the middle section has to be aligned with the external section of the wing. This is simply obtained by fixing the single wing on your working table and checking that the ailerons of 2 sections form a straight line.