American Pickers: Mike Picks Raleigh International and Dayton Bicycles (S18, E4) | History
Вставка
- Опубліковано 26 жов 2018
- Mike geeks out with a man who also used to build bikes and scores Raleigh International and Dayton bikes from him in this clip from Season 18, Episode 4, "Pedal Pushers". #AmericanPickers
Subscribe for more from American Pickers and other great HISTORY shows: histv.co/SubscribeHistoryYT
Watch more American Pickers on UA-cam in this playlist:
po.st/WatchAmericanPickers
Find out more about the show and watch full episodes on our site:
po.st/History_AmericanPickers
Check out exclusive HISTORY content:
History Newsletter: po.st/HistoryNewsletter
Website - po.st/HistoryWeb
Facebook - po.st/HistoryFacebook
Twitter - po.st/HistoryTwitter
"American Pickers" takes antiquing to a new level as Mike Wolfe and Frank Fritz scour the country for hidden gems in junkyards, basements, garages, and barns.
HISTORY®, now reaching more than 98 million homes, is the leading destination for award-winning original series and specials that connect viewers with history in an informative, immersive, and entertaining manner across all platforms. The network's all-original programming slate features a roster of hit series, epic miniseries, and scripted event programming. Visit us at www.HISTORY.com for more info. - Розваги
Just stole that Raleigh for 300$ 😂😂😂😂😂😂
That road bike was a good pick, virtually mint.
No Mike the RALIEGH International is a 1971 and Internationals always used wienmann center pulls even though many people changed them out to CAMPY side pulls
I have a Raleigh International, purchased in 1976 for $525. Toured extensively in the Rockies with it. Raced as an amateur with it. Put paniers on it and did tours of Nova Scotia; Vermont; Maine. Still using original Brooks saddle and campy components. Still riding it at 66 years old. Best advice ever was when in 1976 a friend told me it was the best all around bike I could buy.
I have a Raleigh GranSport from the 60s still in mint condition.
@@1a2b3c4. GranSport was my first bike back in 1972
@@cajuninct
So, what do you think about it ?
@@1a2b3c4. I think you should keep it.
That International is a wonderful bike. My friend had one in the mid 70’s, probably still has it. The older bikes can be ridden forever because their components aren’t unique. Today’s bikes become obsolete quickly.
I still have my Motobecane 21 speed from back in the day ,,, I have a Carbon fiber road bike,,,,,and have ridden and owned many,,,, Never ridden a bike as fast as the Motobecane,,,,,and it's heavier. But the height of the frame stiffness of the be Vitus tubing and the bearings and Miche rims it's just awesome,,,,😎
I had one like that I got for my 12th birthday.
Alot of British people have a Raleigh bike rotting away in their sheds lol
To offer only 300 on Raliegh International was truly an insult
They cost a thousand or more on ebay
Yeah i cant believe that either, talk about lowballers ha ha 😂
Mike has swindled many people.
I had a raleigh ten speed in the early 70's that I bought and had serviced at C.B. "Red" Klinedenst on south Duke Street in York PA. They also sold Columbia's.
Nice Raleigh Carlton, I thought Mike would mention about Raleigh taking over Carlton Cycles it's an interesting story.
Just purchased a raleigh from the thrift store because my friend had one back in highschool we turned into a fixed gear. Anyway i just got home with my $35.00 purchase and come to find out it's the same model as the one in this video. now knowing this now I'll keep it all original.
Love these clips.
Reynolds 531. Mike really knows his stuff.
It’s pronounced “five three one”
loved that movie
Dude are you serious , Raleigh International's are worth a lot more then $300, thats a serious steal, really highway robbery 😂
They usually cost between $1000 and $2000 on ebay
I bought my first 10 speed back when I was still in high school in 1972 and I remember my friends asking why I was spending that kind of money on a bike when I didn't even have a car but I always loved riding bikes and would just ride for hours.
I have a Raleigh pioneer 1 use for work every morning l love this bike freedom
I started working in elementary school so I was able to pick up my first bike then after saving several paychecks.
Thank you...
I had a Dayton Roadmaster as a kid in the 50s only 3 speed though.
Look at the upper platform of the rear derailleur. The production year will be stamped on top.
I have one of these Raleigh bikes, tan with pinstriping, really thin tires, all aluminum frame. Ill keep it put up for my grandkids to have in 20 more years
Teach them how to maintain a bike first.
i love it history 18 oll video
That movie was made in bloomington indiana and in Martinsville Indiana my home town.
A cool movie I still think about from time to time; and there's very few movies I think about years later. About becoming an adult and seeing possibilities beyond your hometown, the youthful enthusiasm for something, friction with parents, etc.
People around here put these classics by the roadside to give them away i hit the brakes and scoop them up; Raleighs, Motobecanes, Peugeots, etc
i have ridden carbon fiber, alu, ti and Reynolds steel bikes. nothing beats steel bike are just awesome for road bikes. descending Mountain passes on a steel frame is slick, point and she goes.
I know what you mean. I have a Kent Thruster which has a steel frame and it descents like no other bike. Steel is real✌😊
I have to agree,,,😎
$300 for the Raleigh is a great deal!
raliegh bikes great episide for afectionardos of theise bikes ive owned a few clasics the 80's quazar 501 airo tubing a bomber i still have both bikes
I've got a Raleigh bike that was the last USA made Raleigh with a Technium frame. I heard through the grapevine that Raleigh hired X NASA Engineers to develop the technium frame.
I owned a mid 80’s Raleigh Technium with Sun Tour Components too. It was a nice road bike but not Raleigh’s top tier model which is the International.
The Technium was an entry level racing bike with a frame construction of thermobonded aluminum tubes. NASA didn’t actually design the frame as it was pretty much a standard double diamond design with standard road bike geometry. Where NASA was involved is they assisted in developing the thermobonding process used to join the tubes together which consisted of using a thermoset resin and heat to bond the tubes together to make a really strong joint. The alternative method at the time was welding which required thicker rounder tubes and required more aluminum to create a strong weld. Which it did and as the Technium had smaller diameter tubes and was about 500g lighter than a comparable large diameter aluminum tube (think Cannondale or Klein). Large diameter tube Aluminum frames were also notorious for their harsh, ultra stiff ride quality. The objective at that time was to use the thermobonding process to join the tubes and produce a frame that was slightly lighter and did not have the harsh ride quality of large diameter aluminum tubes. Raleigh succeeded in that respect. The bike was marginally lighter and the ride quality was not nearly as harsh.
However the design failed because it took the frame stiffness to far in the opposite direction. The overall frame lacked strength, was very flexible on the bottom bracket and did not provide a ride quality that inspired confidence during sprints, climbs and descent.
In fact the frame design flaw on descents was quite frightening. During a steep descent as your speed exceeded 35 mph the bike frame would develop harmonic resonance and became worse as your speed increased.
Needless to say that was incredibly unsettling as it felt like the frame was going to vibrate apart. It was that severe. So for general road riding it was a nice bike but for competitive riding it kinda sucked.
I ended up selling after one season and replaced it at a similar price with a Schwinn Premise made with Columbus SL tubing and a brazed lug construction and Shimano 105 components.
That was definitely a better bike than the Technium and I raced it for three years than upgraded to a Schwinn Paramount which has a superb ride quality and I still own and ride it. Though I did upgrade its components a few years back to Dura Ace 7800 series components.
@@Mottleydude1 Vibrate apart? I had a Tanaka 2 stroke with a gates kevlar belt drive on mine for over 5 years. It felt fine, it would hit 38 MPH. Years ago I took the motor off, and the frame is good still. I inspect it regularly. Bout to put drop bar on it with a 1 X 10 drivetrain. It is a MT400 Rsi
@@thesingletrackslacker8591 I don’t know what to tell you. When I first noticed it on a descent I immediately thought the frame was out of alignment. So I had it checked out and it wasn’t. I had Wobbler 32 spoke wheels on it which were pretty good wheels. Thought they might have been out of round or true but they weren’t and I would have noticed that before I hit any hills.
I have no idea why it did but from 35-40 mph it was very noticeable and above 40 it was down right frightening.
@@Mottleydude1 I bet! I find anything over 30 mph sketchy on most bicycles
@@thesingletrackslacker8591 That’s why I’m not a weight weinie. My understanding is that there are a bunch of factors involved with speed wobble (harmonic resonance) but that bikes that have tube walls that are to thin and to small a diameter to the weight of the rider are more prone to harmonic resonance occurring on a fast descent. Even then it’s pretty rare but when it does happen it is freaky. At first I could see and feel the handle bars, head tube and the top tube oscillating but as I gained speed it got much worse and I could literally see the head tube and top tube twisting rapidly to the left and right. So when I said I thought it was going to vibrate apart I wasn’t exaggerating.
That Technium was my first good quality road bike and was considered very lightweight for that time at 19# but as bike frames go it was more flexible than I liked.
I have had a lot of races great bikes ferry fast but not the best in in the rain
$300 for the Raleigh ?
$300 ?
Campagnolo all around with Brooks saddle $300 ?
1:53 he almost spilled something 😝
What?
Those Binda, or Christophe straps alone can bring a small fortune.
I kept my Christoph straps put up,,,,they are like new,,,,
My international has a normal handlebar and the shifter+derailleur was sr sun tour xct and so are the brakes. The actual gears were shim amp though. The international really confuses me. I have no idea what my original wheels where though
Its a Raleigh by golly!
The guy would have sold those bikes to anybody with the cash and tv crew. They are hamin it up for the show.
no way that tandem dates to the 30's.
Maybe around 40’s era or 50’s era at least
Which bike shop, The Spokesman, Big Wheel, Bicycle Express or Blue Wheel?
Raleigh.
Ha that bike is from my home city
Are the pedals made of metal
That is ridiculous that “it’s like day to day treasure…….”to say every time
Maybe bicycle gangs
every go here for more details
For a bike guy he got the tubing wrong. It's not 5 "31".. it's pronounced 5-3-1. You say each number as it's own
This was when he was putting on the fake act about how much he carried about his daughter. Now he is divorced from his wife and what I heard rarely goes to visit his daughter.
Let the runt straddle that bike
Dude 300 for the Reynolds and Campy Raleigh? Give me a break. That’s laughably low.
Bicycle Bicycle I Want To Ride My Bicycle
Mike, I love ya but you took advantage of that gentleman's kindness for that International.
Chrome lugs look a bit rough, paint looks a bit sun faded. Nothing rides like a 1971 Raleigh international, I know, I own one. Of all the bikes I've ever owned, the Raleigh international is the best, soaks up bumps, comfortable, turns like a dream. I'll never sell it, hope they bury me with it!🙂🙂🙂
@@jefferyobryan6351 Yes i agree 100% my 72 international rides like a dream of all the bikes i owned i can safely say without a shadow of a doubt its 100% keeper
@@jefferyobryan6351 It dusty but has low miles on it Internationals sell for $1000 or more on ebay
B
Exciting bicycle business ,I just don't see how , maybe back in the day but Walmart has the majority today, breaking away was a horrible movie in my opinion I was one of those who didn't understand I'm still trying but no light
I feel bad for peoppe who dont know anything about bikes/bycicles
You over paid
Post Telugu serie for more views
i still have my original 1988 ross eurosport