You're only doing two wheel drive on the truck your building. It's just interesting and I was just wondering. I guess the answer is watch the video on it when I put it out. Well I guess I answered my own question everyone have a great day and a great crawl
Yeah I used a little blue loctite on some of my screws and I ended up stripping out some screws. I switched to clear fingernail polish. It holds nice and snug and little easier to break loose.
I bought the Injora 550 35T motor to go with this transmission. The hole on the mount plate on the front of the transmission is a hair too small for the housing of the motor around the shaft. Is this something that has to be modified (i.e., with a Dremel), or do I need a different motor?
I have one and I don't think it's low enough gear . Is there a way to make it lower ? Or has anyone put a gear reduction behind it in-between it and a transfer case . I'm thinking I have enough room but don't know for sure . Thanks
It's designed to be on a crawler but you can do a planetary gear reduction in front or change the turn of the motor or a transfer case behind or regear your axles if you need to it all depends on what you have for room you unfortunately cannot read gear the transmission itself
@@creepycrawlerrc7868 thank you. I think I'm going to try to reheat my axles next. Could you point me in the rite direction ? It's a full costume build . 2 door jeep . Trying not to cut floors out. It runs now . Pretty good but would like just a hair more without going brushless. I also half a couple more things I'm building . Boat.. repowering my Traxxas rally.... And my bandit..... And working on a redcat sct pro. My jeep is the one I use the most
I love these transmissions. I have two been running one for over a year on a really heavy scx10... no issues yet
I've been pulling my trailer and my rig and I have not had an issue yet just keep it greased
Thanks man ive been looking at getting one of these. This makes me feel heaps better about buying man !!!
Did you get one ? And how is it
Thank you for the info you provided 👍👍👍👍👍👍🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾
👍
Excellent Video and very good Explanation .. Subscribed.!
Thank you
Thank you so much!
Any time
You're only doing two wheel drive on the truck your building. It's just interesting and I was just wondering. I guess the answer is watch the video on it when I put it out. Well I guess I answered my own question everyone have a great day and a great crawl
2wd just to see how it works and its doing good but I'm going to need to put some wheat up front
Perfeito parabéns 👏👏👏👏👏👏😍🇧🇷🇧🇷🇧🇷🇧🇷
Great informative video. Thanks for sharing.
Any time
nice job! thanks for sharing! 👍
Great useful video. Just got one of these.
There good and did you get a gear with it
@@creepycrawlerrc7868 I did get a gear with it yes. Still waiting for the motor to arrive. Trying to work out the axle links at the moment.
Yeah I used a little blue loctite on some of my screws and I ended up stripping out some screws. I switched to clear fingernail polish. It holds nice and snug and little easier to break loose.
thanks so much man
Thank you
Very interested in you dualy build keep it up
I'm waiting on parts shipping is slow
I just got one if these in a trade but it was a roller. Do you need a specific pinion gear for this? Love the design just hoping I can make it work
15t 0.7mod
@@creepycrawlerrc7868 thank you!!
@@rickygouin666 did you find the pinion
Great vid...you're one of the only guys I've seen put up a vid on this. I saw you post something about a 15t pinion...is that what worked?
Thanks you
Great video, thanks for sharing. Do you know what the “spare” large washer is for that they supply in the packet?
Maybe it's a spacer for one of the gears.... I will look into my gearbox and see
@@creepycrawlerrc7868 thank you
@@goesbysteve I did not see any large washers in my transmission
I bought the Injora 550 35T motor to go with this transmission. The hole on the mount plate on the front of the transmission is a hair too small for the housing of the motor around the shaft. Is this something that has to be modified (i.e., with a Dremel), or do I need a different motor?
You my need to mod to fit motor
Did you end up packing it with grease or have you been running it dry / as is?
Full of grease
what is the the size of pinion gear?
0.7M 15T
@@creepycrawlerrc7868 Thank you
May I ask what pinon your using? Thank you!
I will look
I have one and I don't think it's low enough gear . Is there a way to make it lower ? Or has anyone put a gear reduction behind it in-between it and a transfer case . I'm thinking I have enough room but don't know for sure . Thanks
It's designed to be on a crawler but you can do a planetary gear reduction in front or change the turn of the motor or a transfer case behind or regear your axles if you need to it all depends on what you have for room you unfortunately cannot read gear the transmission itself
@@creepycrawlerrc7868 thank you. I think I'm going to try to reheat my axles next. Could you point me in the rite direction ? It's a full costume build . 2 door jeep . Trying not to cut floors out. It runs now . Pretty good but would like just a hair more without going brushless. I also half a couple more things I'm building . Boat.. repowering my Traxxas rally.... And my bandit..... And working on a redcat sct pro. My jeep is the one I use the most
how has this held up and how smooth is it?
Great so far