You guys are awesome. Thank you. Autozone and similar companies refuse to install batteries in Infiniti cars ( too technical is the excuse) . Was quoted 140 dollars labor just to install the battery. I am a total novice in these things. With the videos help it took me 25 minutes to do this. Much appreciated.
This was really helpful. The only slightly tricky part was figuring out how the top plastic shroud came apart... I don't have a memory saver but after connecting the new battery, I didn't notice anything missing. The clock was correct and all my radio presets were still there.
Your video helped me out a great deal. I thought changing the battery out of my INFINITY QX50 would be simple, but I ran into a few snags. Once I viewed your video, I was good to go! Thank you so much!
Can’t thank you enough for including the detail of the cowling pieces. Your video made this job a snap. I did this at a shop my buddy owns and he has a clamp tool to help lift the battery out so you may want to look into that for future videos. Cheers!
Thanks for uploading this. I found it's always good to review the steps prior to jumping in and this gave me a good idea of what is needed to be done. I literally just finished up replacing my battery and have some minor suggestions. You called out the size of the terminal nuts but not on the braket which were also 10mm but need a deep socket. Also should caution that the hold down braket just hooks at the bottom and be carefu not to drop them after removing the nuts. I didn't have an issue but I could see it easily getting dropped. Last suggestion would be just a note how to install the clips. I imagine there are some that are just getting into this type of stuff and may not realize you have to hold up the center of the clip when reinstalling. Thanks again, much appreciated.
great video thanks is there a link to the memory saver you guys used? the dinky ones off amazon plug into cig lighter and use 9v battery. i want big one that clips to battery like yours
Hi - Thanks for watching! It depends on the vehicle. Anything from nothing, to minor resets like clock or radio, to no start due to immobilizer reset. Check out our video on memory saving. The link is in this video's description.
I put a 24F battery in my q50 and everything in my car turns on but the engine, when I try to start it the car clicks once and doesn’t turn on. The recommended battery size for a q50 is a 35, does it matter?
Thank you for watching. If you do not have a jump back showed in the video you can use a memory saver with and OBD port connection. You can see our videos on using a memory saver.
Hi - Thanks for watching! If a memory saver was not used during battery replacement, several vehicle systems may require resetting. We suggest that you check the vehicle owner's manual or a service/repair manual for the reset procedure(s).
The battery part number depends on your vehicle model and options. You can get a replacement battery from most auto supply stores, you don’t have to get it from the dealer unless you want an OEM battery.
Hi - Thanks for watching! Just looked at the video and am not seeing what you are commenting about. At what point (time) in the video are you referring to?
What would happen if you don't have a memory saver. My window guy at to replace buy windshield and had to disconnect the power from the battery this calls the car not to start
Hi - Thanks for watching and sharing your experience. Depending in the vehicle, not using a memory saver can result in situations like minor or no vehicle resets, or resets to vehicle systems that require procedures explained in the vehicle's owner manual and service/repair manuals. Check out our video on memory saving procedures. ua-cam.com/video/vSP3ShcaFgQ/v-deo.html
Hi - Thanks for watching! We suggest that you check the vehicle owner's manual to be sure. There should also be information on any vehicle system resets that may have to be performed after a battery replacement, and how to do them.
Nice video, but the editing doesn't show the exact locations of certain parts and areas. I did learn not to remove my own battery because I don't have the machine to keep power to the brain.
You installed the positive cable incorrectly. There is a rubber guard over the cables where they drape over the metal parts that's supposed to protect the cable from making contact with the metal edge. You were supposed to spread the rubber part to make sure it straddled the metal edge. You failed.
Whoever designed these cars is a narcissist. We couldn’t figure out how to replace the battery and when my neighbor who claimed to be an expert came over to try it, he said it was nearly impossible and hard to figure out, and these are the same neighbors who always say I’m an idiot and unsuccessful in life and none of these people could figure it out and I didn’t know anything about it either but instead of being lazy I decided to search on Google how to replace a battery for an Infiniti Q 50 and then this video came up And I was able to do it by myself within 15 minutes and everyone was impressed 😂
Hi - Thanks for watching! We suggest that you check the vehicle owner's manual or a service/repair manual for any computer reset procedures that may be necessary.
Well darn... this was a letdown. Not the battery I'm interested in... who needs a guide on removing a 12V battery -_- How about the 345V battery in the trunk?
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You guys are awesome. Thank you. Autozone and similar companies refuse to install batteries in Infiniti cars ( too technical is the excuse) . Was quoted 140 dollars labor just to install the battery. I am a total novice in these things. With the videos help it took me 25 minutes to do this. Much appreciated.
Hi - You're welcome and thanks for watching and sharing your experience!
Did you use that memory device?
Go to advance auto parts they do it for free
This was really helpful. The only slightly tricky part was figuring out how the top plastic shroud came apart... I don't have a memory saver but after connecting the new battery, I didn't notice anything missing. The clock was correct and all my radio presets were still there.
We're glad it was helpful. Thanks for your feedback!
Same. clock correct all radio settings saved, no problem
Your video helped me out a great deal. I thought changing the battery out of my INFINITY QX50 would be simple, but I ran into a few snags. Once I viewed your video, I was good to go! Thank you so much!
Hi - You're welcome and thanks for watching!
Can’t thank you enough for including the detail of the cowling pieces. Your video made this job a snap. I did this at a shop my buddy owns and he has a clamp tool to help lift the battery out so you may want to look into that for future videos. Cheers!
Great job changing your battery! Thanks for the advice and support of our channel!
Regarding the memory saving procedure, can I just use jumper cables from a good battery to the battery terminals on the Q50 ??
This is exactly what I needed to know. Excellent.
Hi - Thanks for watching!
Thanks, quick and easy 5 min struggled instead of the 30+ min videos 😊
Hi - You’re welcome and thanks for watching!
I'm curious as to why you didn't recommend applying a ternimal protectant grease on the new battery?
@@MunchnYa it’s for corrosion , actually work lol
Thanks for uploading this. I found it's always good to review the steps prior to jumping in and this gave me a good idea of what is needed to be done. I literally just finished up replacing my battery and have some minor suggestions. You called out the size of the terminal nuts but not on the braket which were also 10mm but need a deep socket. Also should caution that the hold down braket just hooks at the bottom and be carefu not to drop them after removing the nuts. I didn't have an issue but I could see it easily getting dropped. Last suggestion would be just a note how to install the clips. I imagine there are some that are just getting into this type of stuff and may not realize you have to hold up the center of the clip when reinstalling. Thanks again, much appreciated.
Hi - Thanks for watching and sharing your experience and tips!
I definitely just dropped mine smh.
YaThanks ysydysiysysd
Took me 20 minutes or so thanks to your video.
Thanks for watching and great work!
Is this the same for a 2017 Q50 twin turbo in need of a memory saver
great video thanks is there a link to the memory saver you guys used? the dinky ones off amazon plug into cig lighter and use 9v battery. i want big one that clips to battery like yours
Thank you for watching. We use a 12V OBD direct connect style.
what happens if dont use any memory saver and simple change the battery.
Hi - Thanks for watching! It depends on the vehicle. Anything from nothing, to minor resets like clock or radio, to no start due to immobilizer reset. Check out our video on memory saving. The link is in this video's description.
Hi, i was wondering the battery you changed is it EDF or AGM type?
Is it necessary to use a battery saver
You can just leave the running while changing the battery.
Thanks looks like the shrouds are the only extra things
Hi - You’re welcome and thanks for watching!
I put a 24F battery in my q50 and everything in my car turns on but the engine, when I try to start it the car clicks once and doesn’t turn on. The recommended battery size for a q50 is a 35, does it matter?
The Battery Shop Update: I brought the right battery for my car and it still doesn’t work
The Battery Shop I cleaned my batter terminals and it works 😅
@@movindy lmao
I took that same cover of in my 2014 q50 and theres no battery there?
You probably have a hybrid. It's in the trunk behind a panel... on the back part driver side.
Thanks for uploading the video, very helpful.
Hi - You're welcome and thanks for watching!
What mm wrench is used to loosen the fastener on the battery terminal?
We used a 10mm wrench!
How can I reset the memory if I dont have that connection to keep the settings?
Thank you for watching. If you do not have a jump back showed in the video you can use a memory saver with and OBD port connection. You can see our videos on using a memory saver.
Ichenge my battery a Infiniti Q50 and the console is failed Ken you helped
Hi - Thanks for watching! If a memory saver was not used during battery replacement, several vehicle systems may require resetting. We suggest that you check the vehicle owner's manual or a service/repair manual for the reset procedure(s).
What is the the replacement battery part number and can you get it from I ther than the dealer
The battery part number depends on your vehicle model and options. You can get a replacement battery from most auto supply stores, you don’t have to get it from the dealer unless you want an OEM battery.
Nice video, except the part where the rubber seals from the positive cable is not put back in place in the slot 😅😬
Hi - Thanks for watching! Just looked at the video and am not seeing what you are commenting about. At what point (time) in the video are you referring to?
@@TheBatteryShop 3:30
Where can i get that memory saver?
You do not need it just replace it
What mm did you use to remove the battery holder ?
Thanks for watching. We used a 10mm socket.
What would happen if you don't have a memory saver. My window guy at to replace buy windshield and had to disconnect the power from the battery this calls the car not to start
Hi - Thanks for watching and sharing your experience. Depending in the vehicle, not using a memory saver can result in situations like minor or no vehicle resets, or resets to vehicle systems that require procedures explained in the vehicle's owner manual and service/repair manuals. Check out our video on memory saving procedures. ua-cam.com/video/vSP3ShcaFgQ/v-deo.html
@@TheBatteryShop thanks
Is the memory saver really needed for replacing the battery?
Hi - Thanks for watching! We suggest that you check the vehicle owner's manual to be sure. There should also be information on any vehicle system resets that may have to be performed after a battery replacement, and how to do them.
This is cute but my battery in my 2016 is in the trunk and I can’t get it out because of where it’s positioned.
That’s why you don’t get stupid hybrid cars…
Thanks for uploading the video. It was informative.
Hi - You're welcome and thanks for watching!
Where can I find this memory saver
You can purchase them at retailers like Target, Amazon, Advance Auto Parts, etc
thanks guys
Thank you for watching!
What’s the memory saver for
Hi - Thanks for watching! Check out our video on memory saving for the best answer to your question ua-cam.com/video/vSP3ShcaFgQ/v-deo.html
Nice video, but the editing doesn't show the exact locations of certain parts and areas. I did learn not to remove my own battery because I don't have the machine to keep power to the brain.
Hi - Thanks for watching and sharing your experience!
Does this car need the new battery to be programmed to it ?
@@TheBatteryShop I cant seem to find any indication of this needing to be done anywhere else. Are you positive the new batter needs to be registered ?
You installed the positive cable incorrectly. There is a rubber guard over the cables where they drape over the metal parts that's supposed to protect the cable from making contact with the metal edge. You were supposed to spread the rubber part to make sure it straddled the metal edge. You failed.
Commenting so i remember when i do mines tomorrow
Thanks for watching. Yes please make sure to spread the rubber harness over the guard to prevent any issues. Thanks for the feedback.
Whoever designed these cars is a narcissist. We couldn’t figure out how to replace the battery and when my neighbor who claimed to be an expert came over to try it, he said it was nearly impossible and hard to figure out, and these are the same neighbors who always say I’m an idiot and unsuccessful in life and none of these people could figure it out and I didn’t know anything about it either but instead of being lazy I decided to search on Google how to replace a battery for an Infiniti Q 50 and then this video came up And I was able to do it by myself within 15 minutes and everyone was impressed 😂
Thank you for watching and glad we could help you out!
Thanks- good information.
Hi - Thanks for watching! We're glad you like it.
Hi Monica! I’m a mechanic but would like for you to change my battery please!
Hi - Thanks for watching!
Thanks
Hi - You're welcome and thanks for watching!
I never used a memory saver and my car won’t start now
Hi - Thanks for watching! We suggest that you check the vehicle owner's manual or a service/repair manual for any computer reset procedures that may be necessary.
@@TheBatteryShop my car is at Infiniti the whole computer is messed up now
Well darn... this was a letdown. Not the battery I'm interested in... who needs a guide on removing a 12V battery -_-
How about the 345V battery in the trunk?
Thank you
Hi - You’re welcome and thanks for watching!
You guys spelled Infiniti wrong lol
Ha, good catch! Thanks for watching!
Infiniti