How To: Whirlpool/KitchenAid/Maytag Refrigerator Drain Tube W10619951
Вставка
- Опубліковано 26 кві 2018
- How To Replace: Whirlpool/KitchenAid/Maytag Drain Tube W10619951 www.appliancepartspros.com/whi...
Symptoms: ice build up on bottom of freezer causing water leak on floor.
Tools: heat gun, 1/4" nut driver, towel.
This Whirlpool/KitchenAid/Maytag made Refrigerator Drain Tube replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Refrigerators: W10309238, W10344402, 2887289, PS8691807, W10210987, W10210988, W10344401, W10585186, W10588598, W10604169, B0156NFUV4, B002TIW9G4, B00LHQYJKS, B00ZFS3GIA, B00J87ZS8K, B00LQDA5RS, B018SRR25M, B004048IZ6.
Buy the new Refrigerator Drain Tube W10619951 here: www.appliancepartspros.com/whi...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros - Навчання та стиль
Awesome. Thanks for this. My elderly neighbor is having this exact problem.
Great review >> straight forward and user friendly. Thanks :)
Easy to follow! Just did a swap on my unit. KitchenAid. Ordered this same part. Took about 15 to 20 minutes to remove the refrigerator, remove the panel, remove the old drain (sure enough, there was gunked up fibers right where the water comes out) and out in the new piece.
Our bottom freezer was leaking every day near the bottom right and left foot / corner. We'll see what happens through the weekend. This piece seems much better designed. The old piece is open and will accumulate gunk and blockages over time.
Did it fix the problem? I just did the repair with the new part and am hoping that the freezing/leaking is done for good.
@@bluecollarbuddha948 we ended up replacing the refrigerator with a Bosch. There were other issues we were having. We bought the home and it came with the refrigerator that was about 8 years old. This swap did fix the leak though.
Great video. Thanks for the information.
does this part need to be cleaned the way the old drain bibs? I have this part but it started leaking again after 4 years, Wondering if it needs to be cleaned.
Thank you so much for the video I watched another video this was more helpful because it didn’t mention the white part that you have to put on the drain I installed the new part 👍
Instructions worked well for my KichenAid frig. My frig already had the new drain pipe with the trap/bend in it. After I melted all the ice, the drain would still not drain the water. Root cause: Some spinach (or something green) had plugged up the trap in the pipe, causing the water to back up onto the floor of the freezer compartment and eventually onto the kitchen floor.
Glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.
Thanks. That worked
Hey thanks with ur help I hopefully fixed it! Cheers Dan
You are welcome. If you need anymore help please let us know!
Thank you. Perfectly explained and spot on for my problem. I did have the new design drain hose, and it was easy to remove and clean after watching this video. Again, thank you.
You are welcome. Glad you were able to complete your repair. If there is anything we can help you with in the future please let us know.
I have this new type drain hose, but my fridge makes a gargling sound as air tries to escape down that hose when closing my fridge or freeze doors. It never used to do this, is there a procedure to stop that gargling noise its very annoying. I have never heard that noise on any other fridge I've ever used.
3:45 did you have to cut off a portion of the spacer to make it fit? In the next scene it appears the spacer is missing a chunk.
A leaking refrig is a very common problem with all refrig units. The units icing up due to the drain tube not getting enought heat from the defroster coil or the new "energy conservation" that does not let the defrost cycle long enought to remove all the ice.
The other is the bladder drain, after many years it clogs up, backing up water, allowing it to freeze. This new "P trap" like a common drain, so no small bladder valve to clog.
Just remember, if you drain tray is broken/cracked... it's going to leak.
What if the ice buildup on the top of the coils around the fan?
Thank you
Its a good video.....but, a couple things he left out....the bottom part doesnt remove that easy, because theres a little button you have to push to release it.. I put a small screw driver from the inside and popped it open.. Then, when i put the spacer in, i heated with a hair dryer cause it was too tight, that totally worked... And that was it!
Thanks for those tips!
How often this going to happen?
@@mashat502 i think just that once..the replacement tube is a better design
@@raysmusic49 in my freezer I have the same tube( new design )and after 5 years , just happened, my husband just fixed it today. If happens again, he said he will call the specialist to fix it, too much….
@@mashat502 the key is to get the freezer totally defrosted! Good for him!
ours kept leaking too. today I took the door off and racks and turned it off and put a header inside of it and it froze all the ice and unclogged the drain hole. took about 2-3 hrs cuz I wanted to make sure all the water drained down the hole completely
Drain froze over again. Defrost timer?
removing the open sided drain tube might be one of the most fustrating things i ever did in my life. there's a push-in bill on one side and i can barely fit my hands in let alone try to push it in to remove the bill.
How did you get the back panel off.
wow watch the video
1/4" hex driver is usually how most appliances have back panel secured. A drill (set to screwdriver setting) makes this task even faster.
or simply snip the end of the drain tube, because it sticks together over time. You will absolutely not see any difference in how your refrigerator works, other than it forever stops leaking water out the front every time it goes into defrost mode. It takes 10 minutes, and costs nothing. Did it 5 yrs ago. Son had same issue 2000 miles away, described the fix, he did t two years ago, works great. There's plenty of videos for that fix.
Thank you for the tip.
the drain in our Whirlpool, Made in America, has dog hair clogging the , becuse the intake fan is strong. there is ice along the rear as well as the down spout. How can I unclog it.
What is the model number of your fridge?
I call BS depending on which manufacturer this drain tube is for. The tube doesn't just lift right off on the bottom with 0 effort as in the video on a Maytag. Beware you can crack your drip pan so this video can be a bust and cost you an additional $100+ if you aren't careful. There is a tab that needs to be pushed in.
Mine was tough to do as well
This was a complete bust for me. I ordered the part according to the model number of my fridge, and there was nothing corresponding to replace. The video looks great, but the insides of my refrigerator looked completely different.
Just melt the ice/clean the drain opening closest to the freezer box.
The end
You forgot to thaw the drain line and make sure it's clear.
sorry to be offtopic but does someone know a trick to get back into an instagram account?
I stupidly lost the password. I love any tricks you can offer me!
@Christian Samir instablaster ;)
@Shane Connor thanks for your reply. I found the site thru google and im waiting for the hacking stuff atm.
Takes quite some time so I will reply here later when my account password hopefully is recovered.
@@christiansamir1273 just say you forgot your password, it'll let you make a new one if you know your username
Done 😅
If there is anything we can help you with please let us know.
This dude used a heat OMG . The number one way to destroy your refrigerator. Get a steamer!
I used a steamer solely based on your comment and it worked amazing. Thanks!
Can you get people without heavy foreign accents to do your videos? I can't understand what this guy is saying.