🟢VW Beetle 2007 Dashboard eerpom read 🟢 0K78X, 1K78X, 2K78X, 🟢 Using Vvdi prog and Tango Cum se face
Вставка
- Опубліковано 25 сер 2024
- Vw Beetle 2007 Eeprom Read, 0k78x 1k78x 2k78x
Using Vvdi prog I read Vw dashboard clusters immo information to program the lost key or keys, Write it back after processing with Tango. Soldering the wires, Starting the car, everything is OK 👌
This video is for informational purposes only! We do not assume any responsibility for material damage or damage to personal property as a result of the information contained in this clip. Use this information at your own risk. More VIDEO TUTORIALS
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY
Acest video este doar in scop informativ! Nu ne asumam nicio raspundere pentru pagubele materiale sau daunele provocate bunului personal ca urmare a informatiilor continute in acest clip. Utilizati aceste informatii pe propriul risc. Mai multe TUTORIALE VIDEO
I used the wiring diagram u have with Autel 608 and it worked perfectly
thanks for the information
Had an identical 2007 Beetle. Instead of choosing 1998 with Tango I chose 2008 (9S12). It allowed me to clone out the key...in other words no file to write back to cluster and car started. Perhaps your car had a different processor?
4F73K ??
Hi Andreescu. I have a 2003 Beetle I'm trying to add a key to using an im508. It can't read the immo data or cs pin. Am I doing something wrong through the OBD or Will I need to do what you have done on this video please? If so, do you know what Autel adaptor it would be please and where the wires would need soldering or where IU can find out?
You need only the pin for 2003 Beetle and the pin should be in the clusters. Obd procedure marelli clusters
@@sebastianthelocksmithandre1600 Many thanks for your reply. Do you know if it'll be the nec or Motorola please?
@@inagbihal8518 I don't know. One of them will work
@@sebastianthelocksmithandre1600 I'm new to the 508. Do you know the order on the screen please. I've just been out and all I keep getting is the diagnostic tool and ecu can't communicate or I need the code to enter 🤷♂️
@@inagbihal8518 I never used autel for this one. In fact has been a while since I've done a Beetle. Last time I have done it with Abrites so...
Hi there, good job,
Do you used an aftermarket keyfob??
Yes I used key diy
Which one you are more likely recommending for the job? Vvdi2 or tango full programmer??
Tango is more comprehensive. I use tango more often than vvdi2
@@sebastianthelocksmithandre1600 really? So you can use tango on the bench and obd? Or just bench? Plenty of car you can do it with tango?? Or just typical cars??
@@przemekfryc5495 tango only does eeprom jobs so on bench yes. No obd.
@@sebastianthelocksmithandre1600 thank you 😊. Do you have what’s up number I was gonna ask you about the device you’re using and what I have and probably still need buy more😃😁
@@przemekfryc5495 +447438333372 glad to be able to help
vvdi2 wont work instead of tango?
Vvdi should work as well
Can you share the pin out for this dash?
You will find it in vvdiprog
I'm having an issue with a 2010 beetle with the 2k78x chip could you possibly help?
I have no idea how I would be able to.. what do you need?
@@sebastianthelocksmithandre1600 well I was trying to make a key in an all keys lost situation. Read the cluster and added keys but the immo light still flashes. Customer found their original and it still works but I don't see the original key in the bin file I read either so I'm trying to figure out if it was a bad read maybe... Also tried to program through obd with pin that it read from cluster but says invalid login
@@mrdaza1988 after reading the clusters, you should write back the file generated by the programmer. Only then the car should start. What did you used to program the transponder?
@@sebastianthelocksmithandre1600 yes I did this with the Autel im608. I also tried to clone key #1 with super chip and vvdi2 but that doesn't work either. At least nothing is messed up because car still starts fine. But now I'm just confused lol
@@mrdaza1988 it seems that you did all the right steps.. I have no idea what happened..