For anyone not sure how to bolt the frame to the tabletop: TOPSKY only gives you bolts which cannot go into wood unassisted. I used M6x15mm threaded insert nuts (brand: uxcell) and drilled holes big enough for them. I put the M6x16mm bolts into those inserts and they attached the rail of the frame to my tabletop just fine. The rail of the desk frame adds about ~1-2mm of distance that the M6x16mm bolts need to travel, so the M6x15mm threaded inserts were the right size.
I just put my desk together and was hoping video would help me understand something. That power adapter box at the end....HOW am I supposed to mount it? There is no mounting hardware to hold it against the desk but it will otherwise hang/dangle by that two prong connecter to the control box which can't be good with the weight always pulling on the control box...plus it will be an ugly mass hanging from the center of my desk. WHAT AM I MISSING? This video ends showing the power adapter being plugged in but NO example of what is then done with it.
Worst directions ever. Absolutely no explanation and leaves you hanging at the end on the most important part. Well done. Next time just do it in Chinese so that at least you’re not pretending you’re trying to confuse us.
For anyone not sure how to bolt the frame to the tabletop: TOPSKY only gives you bolts which cannot go into wood unassisted. I used M6x15mm threaded insert nuts (brand: uxcell) and drilled holes big enough for them. I put the M6x16mm bolts into those inserts and they attached the rail of the frame to my tabletop just fine. The rail of the desk frame adds about ~1-2mm of distance that the M6x16mm bolts need to travel, so the M6x15mm threaded inserts were the right size.
Enjoying my desk frame so far! Great buy!
Love how the video just skips the table top install😂 we go from frame and feet to just magic
Where is the attachment of the legs to the desk top?
Would be good to use it with a voltage regulator?
I just put my desk together and was hoping video would help me understand something. That power adapter box at the end....HOW am I supposed to mount it? There is no mounting hardware to hold it against the desk but it will otherwise hang/dangle by that two prong connecter to the control box which can't be good with the weight always pulling on the control box...plus it will be an ugly mass hanging from the center of my desk. WHAT AM I MISSING? This video ends showing the power adapter being plugged in but NO example of what is then done with it.
Agreed. Seems stupid. I am at that exact point now in the assembly. Will probably use 3M hook/loop tape (which I have to go out and get).
@@ivanh3 Mine came with some 3M velcro.
My antivirus block your website, I don't know why?
Worst directions ever. Absolutely no explanation and leaves you hanging at the end on the most important part. Well done. Next time just do it in Chinese so that at least you’re not pretending you’re trying to confuse us.