Це відео не доступне.
Перепрошуємо.
Inverter Generator Only Runs With Starting Fluid | Step By Step DIY Repair
Вставка
- Опубліковано 12 тра 2021
- Inverter Generator Only Runs With Starting Fluid | Step By Step DIY Repair
If your generator won't start and only run on starting fluid you more than likely have a carburetor issue. Follow along as I show you a quick way to get it running properly again without an expensive repair bill!
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Murray, John Deere, Craftsman, MTD, AYP, etc.
Watch my video on how to fix a generator with no compression;
• How To Fix A Generator...
Watch my video on how to replace a generator carburetor;
• HOW-TO Replace The Car...
Why your generator might not be starting;
• Generator Won't Start?...
Help me make videos or buy me a coffee!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
If you enjoy my small engine repair videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on UA-cam and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on UA-cam to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #smallengine #generator
Watch my video on how to fix a generator with no compression;
www.youtube.com/watch?v=gK_LP...
Watch my video on how to replace a generator carburetor;
www.youtube.com/watch?v=pGih0...
Why your generator might not be starting;
www.youtube.com/watch?v=QzOiH...
Although I don't own a generator. I still watch your videos because you have helped me in the past and you deserve the support.. Your videos are surely worth the watch. Thanks!
Right on the money. Great step by step tutorial.
I have watch plenty of "how to" videos over the years and this one ranks in the top three. Steady and simple video of the components and the work, simple explanation and great tips for people like myself who have mininum knowledge of small engine and their repairs.
For me, I purchased a Westinghouse IGen 2500 last year, ran it once for about 30 minutes, let it run until it died (all gas out of the system) and stored it for a year. Yes, I know, I shouldn't let it sit for so much time.
Several days ago, I tried to start it again with no luck. I pulled and pulled ...and pulled, no luck. It did start one time.....then five seconds later when I switched it from CHOKE to RUN, it died....and would not start again.
I found your video which gave me the confidence (hey, I can do this) but this morning, before I was getting ready to remove the air filter and carburetor boot, I tried it to start it one more time....and on the second pull, it started and ran just fine.
I"m ready for the next time it gives me trouble......Thanks again, A GREAT VIDEO!
Excellent. Appreciate your video shots as you work and the clear way you speak to explain what you are looking for and what you are doing. THANK YOU
All the waving around is making me seasick.
Indeed. Old gas will pull that trick on you. Thanks Don, for sharing.
Hello. I have a Westinghouse i2500. It’s somewhat similar to this. I had same symptoms. I followed your steps and after 3 hours, I had her running again.
Thanks so much for the guide. You’re the man👍
DUDE: YOU'VE SAVED MY LIFE HERE; I JUST GOT A FIRMAN PORTABLE GENERATOR, AND IT'S EXACTLY THE SAME ENGINE AND I HAD QUITE SOME HEADACHE TRYING TO START IT UP. JUST SAW YOUR WONDERFUL VIDEO AND UH I KNOW EXACTLY WHAT TO DO WITH MY PORTABLE GENERATOR..... THANX A LOT FOR YOUR VIDEO
You are an excellent teacher besides being a good mechanic. I look forward to your videos each week as I have learned a great deal from you. Thank you for taking the time and effort to make these videos.
Nice vid Don. Great problem solving and diagnostic skill as always
Years ago when my mother was still alive my folks asked me to look at their ride-on mower which would not start and would cough and backfire when being cranked . 17hp Intek , I pulled the carby bowl gave it a quick clean ( it wasn't dirty ) , pulled the flywheel to check the key ( it was fine ) , eventually became suspicious of the fuel which smelled petroly but maybe not quite right .
I decanted a small quantity into a glass and an equal quantity of fresh petrol into a second glass and set both out in the sun .
24 hours later the fresh fuel was evaporated , the fuel from the mower was still mostly there . My dad had put diesel into the fuel tank on top of the remaining petrol .
Seeing that yellow fuel at 7:15 reminded me of that troubleshooting episode from back then . Sometimes ( often ? ) the answer is very simple , you just have to find it :-)
Don. How lucky can a guy be. I've got a Generac doing the exact same thing and now I can fix it. You just made my day. Thank You!
On more mini generator that doesn't start. ARGH!!!!! Great explanation Don. You videos are the best.
Well done Super Don. Those are great Milwaukee drills too. Great Editing. Ethanol cause no doubt.
Good job Don, it's amazing that this kind of problem occur on a brand new machine.
The most common failure in small engines, is varnish in the carburetor. Although, I sure as heck wasn't expecting that from a brand new generator! I am thinking maybe the guy had bad gas in his can, and poured it into the generator, and it wouldn't start on that. People need to remember to use fresh gas. And if your not going to be using the gas for several months, make sure you stabilize it. Excellent work as always Don!
Thank you so much for this video. I'm not a mechanic, and through this video I was able to successfully fix my generator. I really appreciate the assistance
You always use great analytical technique to diagnose the problem.
You do beautiful work.
Best small generator DIY repair that I've seen in a long time. Thanks!
Always enjoy watching your videos. I find them interesting and learn heaps too. Cheers 🇦🇺
Thank you for sharing this procedure. Greatly appreciated. 🇨🇦❤️
Got a hurricane coming my way next week I’m trying this trick tomorrow!
Great vid Don! I'm getting those torch tip cleaners today. Been using slick bread ties up til now. They are no serrated. Best, Skip
As always Dony you are making us mechanics!
I know this is 2 years old but I’ve looked for months and it never came up until today. The layout of my gen is almost exactly like this one. I was having big problems understanding the half written instructions on mine for removing or cleaning carb, jets and filter. This was so amazing and showed me exactly how and what I needed to do. Fingers crossed I too do nor have to remove entire carb! Thanks a million!!
I really liked this video; I can work on this power unit after watching you go thru the steps! Thanks so much!
You no you're a pretty smart guy and I appreciate all your video's man.thsnks
Dude, i cant even believe it. I inherited a small 2 stroke genny and it would only fire up with starter fluid then die. I did so much stuff to that thing that i gave up and was assuming it was just dead. I cleaned out each jet (which i hesitated to do cause carbs always seemed so touchy to me) and it ran like i just bought the thing. Thank you so much for sharing this!
This video made my repair happen. Thank you Dr.
Great diagnostic. Pretty quiet also. Thumbs up..
Very helpful stuff! Ive got a generator (3 years new) has about 30 hours of run time... not starting up now. Might need to watch all your videos! lol wish me luck...
Great tip about the eco mode for checking a dirty carb. Thanks
Always watch your videos. I use a torch tip cleaning tool also but never thought about cutting off the non serrated tips. Thanks
Nicely described and fulfilled thanks.
Amazing!! I completely forgot that little hole!! I cleaned all the Jets on the carburetor of my generator, on the fuel bypass and everywhere that I could think of but it would only start with the starter fluid, so I decided to ask google and it brought me here! That was the reason I couldn’t get it to start after cleaning the carburetor, anyhow, thank you so much for this great video!!
To remove the carb without removing all the housing, you can remove the studs [by double nutting the studs] and remove the studs with the carb if needed. The carb should just slide out.
When storing my generator, I remove all the gas, run it empty, and then put a quart of stabilized 100% gas and run it for 5 minutes.
That would be a video idea Donyboy. It will save a lot of people when they try to start them when needed.
I never 'store' my generator. Unlike a lawn mower or string trimmer, a generator can be needed in an emergency so I always leave a few quarts of gas in the tank. Periodically, if I haven't used it, I drain and replace the gas.
In this case, do you suppose the gas sat in the generator for a long time, or it was old in a gas can before being put in the generator? I have never seen any gas look that discolored. I usually drain/dump gas from my power tools and run them 'dry' for any period of disuse...but generators seem to be hard to manage that way... Is it recommended that the fuel be drained as shown in the video if not regularly used? I usually just keep them topped off to minimize air/moisture reacting with the gas and vents on caps close... I guess time will tell!
It really amazes me that people who buy these gensets NEVER put in fuel stabilizer. It's one of the golden rules of engine maintenance. Great video.
Would you agree that using non ethanol fuel is easier with the same result? Or, does non ethanol require stabilizer as well?
@@hortyist1I'm here with this exact problem - generator not starting - runs off starter in the intake only.
I ran cali-crap gas and when the power to the house came back... I continued burning off the rest of the remaining fuel... Ran it dry (no load attached).
Then for good measure poured some Tru-fuel in and ran it for ~5min-10min. Stored the generator.
3 months later we go to use it and we have this problem. So I'm not sure what these engines are so finicky about. I'm damn near ready to get a dual fuel one that runs off propane and/or regular unleaded.
Great tips Don. Excellent video and repair. Never really work on any generators (inverters), so great to see how they are assembled. Thanks again.
Thanks again for more tips. Sending this channel out to more friends.
thanks Don
When using torch tip wires to clean jets remember the wires are steel and the jets are brass. Start with a smaller wire and work up. If you try to force too big a wire into the jet you could make a burr in the brass. The jet size can be fussy and a burr in there may undersize the hole or cause turbulence in the fuel flow.
@@garny3766 Tubers? Don has been fixing stuff for a long time and has saved my countless hours of scratching my head fixing stuff. As mentioned the smaller jets are for EPA not the life or performance of the engine.
@@alexrivet1732So... Does this mean if we remove the EPA jets... We actually get some real performance?
@@JoSt5646 I wouldn't say straight up performance gains. Too rich or too lean compromises power. But I'd rather be a little rich than lean.
Another informative video for us DIYers. Thanks Don.
Saved my bacon on my Westinghouse! Yellow fuel and a plugged jet.
Very Good and Instructional. I enjoyed the video!
Very good video Dony. Thanks
cleaning the carb ports with the torch cleaner worked like a champ on my 2000 watt generator.
Watch you for a long time ! You are THE MAN !
Going to try this tomorrow. Last thing i haven't done...
Had a generator like that but it was a Honeywell model. It would run but if you stopped it, it would not start. What I found out after reading the manual it stated to have the fuel tank full. Filled it up and it started. Found out it needed tank full to get the gas to flow to make it start. Bad design in my mind. Though I would share this
This is a very helpful video. What you have here matches my Wen 56200i exactly.
Thanks for sharing Don . I’ll be looking for some torch tip cleaners.
Nice work as always. I’m fortunate to have a station that sells e-0 locally. I also stabilize it when new.
I hate those all in one switches since I like to shut fuel off and let the carbs run dry in generators and such.
Did exactly what you said on a Harbor Freight 2000 which looks exactly the same on the inside and it started right up. Got the torch tip cleaner from ace hardware. Thanks a lot
Hi Don Have a good weekend
thanks Drew, you too!
Thank you! I’ve been struggling with a Northern Tool Powerhorse inverter that’s identical to this. Your video saved me time & money.
My Hyundai 2000 (much older)turned out to be the spark plug, replaced with an ngk and it didn’t flood/foul anymore. It is still very sensitive to stale fuel and long periods of downtime. The compression release seems a bit too effective too. But with regular maintenance, it is a great unit to have around. Great vid as always Don!
Great video! Easy to follow, very well done. It will be my go-to sight from now on.
Glad it was helpful!
it's amazing that a relatively new machine wouldn't run on older gas or the jets would clog up so quickly...i wonder if he got it running with some starter fluid and ran some carb cleaner if it would have cleaned out the jets eventually...something like techron or seafoam???.....i have started snowblowers that sat all summer with gas in them and once they got running after that first start , they ran all winter long...maybe I just got lucky...also, I don't own a generator myself but always want to learn so Great job Don...thanks for your time
Great video Don. I have a Honda EU20I similar size I will be definitely bookmarking this video. Keep up the great videos.
I have a Ryobi 2300 watt that I bought when I got it it had less than 30 minutes of run time on it wasn't even broken yet and I got it used from a guy in the little side jet was what was stopped up it was surging clean the carburetor out and got it running like it should I got a fairly expensive generator for 290 bucks because it needed a jet cleaned out
A great repair. Thank you for the video.
Good video thanks Dony. I wonder if fresh fuel alone would have done the trick?
Thank you! I cleaned everything but the jet in the bowl. Generator hasn't ran in 10 years and the old fuel evaporated and left sediment in there. Good as new.
Great video with some great tips as always!!
Good one!
You are a great teacher.
Thanks Dony your videos are very informative.👍
Another great video!.
wow sir great job thks
Nice, thanks Dony.
Thanks. This helped me solve my problem.
Another great educational video, many thanks!
Great video Don! Clear instructions and expert knowledge, you are the best! Thanks for sharing!
your videos are always awesome!
Nice work. You deserve to get lucky once in a while.
Thanks!
Solid video! Good order of troubleshooting steps,nothing extra, right to the point.
Excellent!
Great job the idle jets are so small but you had the best job of making it a functional generator for the price of your knowledge
Thanks a million. This generator is basically the same as the Northern tools 2300 watt generator. The jet in the side was completely plugged. I cleaned it out and it started on the second pull.
Made that job easy nice work as always Dony !
I had this problem on my Honda..bad gas sitting in the bowl..now I run the gas out to stall the unit then drain the bowl..no more problems😎👍
Excellent information!
Thank you for the info, it's much appreciated.
Excellent Video! So clear and so well demonstrated! Thank You!!
Hooray, Dony! You did it again. Glad you didn't have to take the carb apart. Is that a Honda clone and are Honda inverter generators very similar?
honda are very similar
Thanks Don! I learn something every time I watch... even though I don’t have a generator! I’m going to get some torch tip cleaners. Always looking for something to clean jets with!
Pete
P.S. nice meeting you today.
thanks again Pete for the beer!
@@donyboy73
Let’s get out on the bike soon... get you away from your shop for a bit! Maybe we can show the folks the fun side of the toys! LOL
@@peterdoherty7282 for sure lol
Love your videos and learn so much from them! Could I also use a mini/micro drill bit in a pin vise to clean a curburetor jet removed from the carburetor?
awesome video should hit 100k views ..thanks don
Thanks donny boy
don the master.. thank you don for sharing
Great info as always!
Excellent 👌. Thank you
Nice going Don.....you really can fix our stuff....lol
I have a very similar generator with a different name. Mine surges and has almost since it was new. After watching this video I think I will try to fix it myself, seemed to be pretty simple.
I look forward to your videos I always learn something 👍🏻
Thank you so Much.. this video helped me, although it was a different brand and the setup was a tad bit different it still helped out tremendously. I watched other videos of my brand and none of them were as simply put as yours is. you got a subscriber for life
Great to hear!
Nice job
What did you charge for doing that kind of job. Excellent video by the way, I never seen this kind of inverter/generator before and you gave us some good insight on it. Thanks for that.
Whether you own a generator or inverter or not the knowledge is great, Kinda wondering, do you ever age? I seen your videos of 12 years and you still look the same haha
lol
@@donyboy73 😁
Thanks ever soft spoken knowledgable Donyboy
Ask your guitar/string player friends for their old used strings. I've used them for years for cleaning carb jets. The 2 plain steel strings are useless, but the wound strings have are almost identical texture to the jet clearing tool in this video!
Great idea !