@@doyouluvit If you're sure it's not the batteries, then I would try to reset the lock to the factory settings. There's a small reset button under the batteries. You'll need a small paper clip to depress the button for five to ten seconds and then re-program the lock.
@@TheEndGrainWorkshop thanks! I opened the battery case and took one out then put it right back in and it’s working now. Still bad news tho. Can’t trust it anymore and will have to keep the key with ne
Thank you this was very helpful I thought something was wrong with my lock. I was about to send it back to get my money back. I did everything right it was just a three battery reset part but I got it now. Thanks.
(This IS Important )12 minutes in the video you have to let the door know whether it's a right hand throw or a left hand throw. Put three batteries in / take your reset key or pin hold it down and put the 4th battery in. It does it automatically. Once it locks you're good to go now start your programming.
Good video, wish I would have found it before I installed mine. I got everything installed but I was playing with the lock and put batteries in before I installed it, so that screwed it up a little. But I installed 2 of them and they work great,
The lock replaces your traditional deadbolt. You still have the existing door knob that you use to open and close the door. I hope this helps and thanks for watching!
Sounds like the deadbolt isn't lined up with the door frame. You might see if you can adjust the striker plate on the door frame unit the deadbolt is properly aligned. Hope this helps and thanks for watching.
1. Press the Teeho button twice. 2. Enter your code. 3. Press the Teeho button once. 4. Press the #5 button. 5. Scan the fingerprint you want to remove. Hope this helped and thanks for watching!
When we press the reset button with the door unlocked and open the deadbolt comes out but then it goes back in and gives us several beeps instead of one long beep. Then when we try to lock the door from the outside it attempts to lock our door in the wrong direction. We have reinstalled 2x following directions to the T. So lost now. Maybe we just got a dud?
Unfortunately, it cannot, however, TEEHO does make a wifi deadbolt lock that can be attached to an app, see link below. Thanks for watching! amzn.to/3WcgG9C
This is absolutely the most detailed video I’ve ever seen in my life. I would not have been able to do this without your help. I almost broke it following the paper instructions that had some weird instructions to use a screw driver to take apart the deadbolt, I started doing that while saying to myself “this can’t be right… let’s go to UA-cam” … Thank you!
Hey, I’m really glad the video helped you out! I know exactly what you mean-those paper instructions can definitely be confusing at times. Sounds like you trusted your gut by checking UA-cam, and I’m happy you found my video before anything went sideways with the deadbolt! Thanks for the kind words, and if you ever need help with another project, you know where to find me.
Great so far. I installed two locks, one at my main house and the other in my tiny house. The main house lock gets daily use by my entire family with no issues. I did have to change out the batteries after a year but that was expected due to the high usage. The other lock on my tiny house doesn't get as much usage so the batteries have lasted over a year. I will say when it rains and your hands are wet, using the biometric/thumbprint entry will not work sometimes and we have to use our individual codes but other than that they have worked fine. Thanks for watching.
When you install the batteries the lock will automatically detect whether its a right hand or left hand door. So you can install it on any door regardless of what swing or side of the door the lock is located on. I hope this helps and thanks for watching.
Thanks so much! Glad to hear it worked out for you, even without the instructions! Happy building, and feel free to reach out if you need anything else.
Hey Tim, You have to reset the factory code before it will allow you to input new codes. Try pressing the TEEHO logo button twice and then the factory code 1,2,3,4,5,6,7,8 and then the TEEHO button again wait for the green light then press number 1 and the TEEHO button again then put in your new MASTER code and press the TEEHO button again and then you will need to put in your new MASTER code again to confirm press the logo button and now you have a new master code. From here you can press the logo button and the number two and start programming your new individual codes and fingerprints. Hope the helps and thanks for watching.
Best instructional video on this product by far! Made my installation super easy! Excellent job!
Glad it helped and thanks for watching!
This guy gives perfect directions. Awesome job and thanksnalot
I'm glad the video helped and thanks for watching!
best instructional video on this lock by far. Thank you for the details!!!
Glad to hear it helped!
@@TheEndGrainWorkshop Mine has stopped working. Any sugggestions? There is no way it can be batteries. I just put new ones in a week ago
@@doyouluvit If you're sure it's not the batteries, then I would try to reset the lock to the factory settings. There's a small reset button under the batteries. You'll need a small paper clip to depress the button for five to ten seconds and then re-program the lock.
@@TheEndGrainWorkshop thanks! I opened the battery case and took one out then put it right back in and it’s working now. Still bad news tho. Can’t trust it anymore and will have to keep the key with ne
Very functional your details about setting up the lock door, thank you so much.
Glad it helped and thanks for watching.
Thank you this was very helpful I thought something was wrong with my lock. I was about to send it back to get my money back. I did everything right it was just a three battery reset part but I got it now. Thanks.
Glad it helped and thanks for watching!
(This IS Important )12 minutes in the video you have to let the door know whether it's a right hand throw or a left hand throw. Put three batteries in / take your reset key or pin hold it down and put the 4th battery in. It does it automatically. Once it locks you're good to go now start your programming.
Thanks for watching!
Thanks for creating this video, very much to the point.
Glad it was helpful and thanks for watching!
Love this!! Very detailed.
Glad it was helpful!
Good video, wish I would have found it before I installed mine. I got everything installed but I was playing with the lock and put batteries in before I installed it, so that screwed it up a little. But I installed 2 of them and they work great,
I see how the lock works but how do you actually open and close the door since there’s no handle?
The lock replaces your traditional deadbolt. You still have the existing door knob that you use to open and close the door. I hope this helps and thanks for watching!
For some reason when it goes to lock the deadbolt doesn’t lock the door and the deadbolt tries to lock but it doesn’t fully go into the door frame
Sounds like the deadbolt isn't lined up with the door frame. You might see if you can adjust the striker plate on the door frame unit the deadbolt is properly aligned. Hope this helps and thanks for watching.
What if you screwed it up and you cannot get it to unlock again? Is there a way to reset?
Yes, there is a reset button inside the battery compartment.
How can I delete fingerprints on lock KS02A Techno? When we try to delete it, it doesn’t work.
1. Press the Teeho button twice.
2. Enter your code.
3. Press the Teeho button once.
4. Press the #5 button.
5. Scan the fingerprint you want to remove.
Hope this helped and thanks for watching!
When we press the reset button with the door unlocked and open the deadbolt comes out but then it goes back in and gives us several beeps instead of one long beep. Then when we try to lock the door from the outside it attempts to lock our door in the wrong direction. We have reinstalled 2x following directions to the T. So lost now. Maybe we just got a dud?
Can the lock be attached to an app?
Unfortunately, it cannot, however, TEEHO does make a wifi deadbolt lock that can be attached to an app, see link below. Thanks for watching!
amzn.to/3WcgG9C
Thanks bro!
No problem!
Amazing.... Thanks
Thanks for watching!
This is absolutely the most detailed video I’ve ever seen in my life. I would not have been able to do this without your help. I almost broke it following the paper instructions that had some weird instructions to use a screw driver to take apart the deadbolt, I started doing that while saying to myself “this can’t be right… let’s go to UA-cam” … Thank you!
Hey, I’m really glad the video helped you out! I know exactly what you mean-those paper instructions can definitely be confusing at times. Sounds like you trusted your gut by checking UA-cam, and I’m happy you found my video before anything went sideways with the deadbolt! Thanks for the kind words, and if you ever need help with another project, you know where to find me.
How has it held up....?
Great so far. I installed two locks, one at my main house and the other in my tiny house. The main house lock gets daily use by my entire family with no issues. I did have to change out the batteries after a year but that was expected due to the high usage. The other lock on my tiny house doesn't get as much usage so the batteries have lasted over a year. I will say when it rains and your hands are wet, using the biometric/thumbprint entry will not work sometimes and we have to use our individual codes but other than that they have worked fine. Thanks for watching.
كيف يتم تحديد جهة الباب على القفل ؟
When you install the batteries the lock will automatically detect whether its a right hand or left hand door. So you can install it on any door regardless of what swing or side of the door the lock is located on. I hope this helps and thanks for watching.
لا يزال يعمل القفل على جهة اليسار والمطلوب على اليمين في هذه الحال ما يجب فعله
En español
Fabulous!! Didn't even open the instructions...thank you! Used this for the model without the fingerprint.
Thanks so much! Glad to hear it worked out for you, even without the instructions! Happy building, and feel free to reach out if you need anything else.
Don't these batteries drain very fast? How often do you have to change the batteries? I find batteries drain awfully fast.
I use lithium AA batteries an they normally last a couple of years. Standard AA batteries will only last about six months depending on usage.
@@TheEndGrainWorkshop thank you!
How many fingerprint can you put
It can hold up to 20 fingerprints. Hope this helps and thanks for watching!
Can it be used for thicker doors? 2” wide
It can be used on doors with a thickness of 1- 3/8" to 2". Hope this helps and thanks for watching!
I have a thin door, probably half an inch thinner than normal doors. Do you think I will be able to install it on one of those type of doors?
This lock will fit doors from 1-3/8 to 1-3/4 inch thick. Hope this helps and thanks for watching.
Thank you.
Thank you for the instructions!
Glad it was helpful!
Great Video
Definitely worked,but for some reason,im unable to do a new code,just the factory code
Hey Tim,
You have to reset the factory code before it will allow you to input new codes. Try pressing the TEEHO logo button twice and then the factory code 1,2,3,4,5,6,7,8 and then the TEEHO button again wait for the green light then press number 1 and the TEEHO button again then put in your new MASTER code and press the TEEHO button again and then you will need to put in your new MASTER code again to confirm press the logo button and now you have a new master code. From here you can press the logo button and the number two and start programming your new individual codes and fingerprints. Hope the helps and thanks for watching.