Bro thanks you for that video, I too order that controller , but is come only January 15 , very long , only you full show about that controller, thanks you!
i used that solar controller for almost a year now, one is 80 amperes and 100 amperes, its work well , its not a real mppt but its better than pwm when it comes to charging, it was cheap ,it cost me 1000 philippine pesos ($20) for the 100 amperes for this controller, great set up for beginner and fits for your budget..
I agree to that it's a great device and it does the job to get it done when it comes to charging from my perspective there's not a lot of videos on it but I thought I should try to help people that's looking for more information on how to use it and you're right it's not the best out there but it's good for beginners and it gets the job done 💯
Thanks for the video. Just got one of these and can't get it to start charging. Did you have to tirn on some setting to get it to charge? I tried IUnversal and Manual mode but it always shows 0.0 amps from the panels. Definitely have juice coming in and the connections look solid. Frustrating! Hope it ain't dead. Thanks for any help.
Try it in these exact steps turn everything off plug up the battery first then solar panels last... Make sure wires are not corroded.. solar panels getting power but you do not see charge on the panel device? try checking that all connectors are connected and tight from panel to charging device solar port.. if none of those options are working sometimes the device may be defected you can try a 12 volt battery tester and put the two prongs on the positive and negative side during daytime hours to see if you're getting 12 volts coming through the wiring from the panels if it lights up it's working fine but if you're still not getting any reading on the device then the device may not be working properly other words defective I appreciate you for watching my videos I hope something I mention is able to help you out.. stay tuned for my follow-up video on the charging device I will show some things that could probably help others when it's not charging during daytime hours
@@yomontOME Thanks! I tried a bunch of stuff but it just won't charge. From reviews it looks like I'm not the only one. Too bad. Luckily I have an older 60A charger that should do the job. I appreciate your taking the time to help! Good luck with your solar system.
I have the first charging option turned on in all circumstances, when the battery is charging, does the charge controller turn off? I feel like it is still charging and I haven't seen it interrupt charging. What does it look like when the controller detects that the battery is sufficiently charged? What does the controller do? How does it behave?
100AH lifepo battery normally can charge half so 50amp but that max most i think are down at 20amp charge cycle that just the charge side the bigger AH the better with this charger so up to 200AH at max charge 100amp but you need the input from solar to give that much think of head 2.4kw max so 3kw of solar i dont know any panels giving there max but thia geuss and not done working it out i dont do math
If the battery is fully charged you will not get no voltage to charge the battery from the device it will stay to a bare minimum until the battery start losing charge then you will gain voltage to keep the battery at charge state once you start using axillary
Thanks i put in the model number on UA-cam and see only 2 vid but short or so quick had no information so thanks don't suppose for other people you could add the model numbers in your search more people will find yoir video mine was 100amp but know are about 6 in all on the box happy new year
Thank you for your comment I really appreciate you for watching I will take in consideration to putting up my serial number and a new video stay tuned for a follow-up video!!
@@andreengland2279 do you think it loses power because the battery is almost fully charged? Normally when it loses power is because the battery is almost to fully charged or is currently finished charging you will then notice the voltage drop down to 0. 3 💯 just enough to keep it from dropping voltage..
I can say that there will always be other brands that are better but from what I can see from my usage of this particular item it works very well and I haven't had any problems but that's just my opinion 💯 I appreciate you for watching my videos!!
I am using LiPO4 battery, how can I reach the floating voltage adjustment step? How can I adjust the floating voltage? I would like to ask those who have information to help
I could not reach the floating voltage adjustment step of this device. Additionally, I see that there is no possibility of adjusting the charging current of this device. I plan to use this device to support the battery charging MPPT output of the solar inverter. I would like my friends who are making applications on this subject or have knowledge about the things I am trying to learn to support me.
Hey I've set my ups with floating voltage 13.8(charging from source) and mppt I've directpy connected with battery to charge from solar but im not geeting an option for high and low vlotage after pressing reset button as a result I dont know the high voltage of mmpt so when charging from solar it is sbowing me overcharge issue, please help
Top man - was stumped with mine as I had lost load ability - But yea, back on universal control she's all tickety-boo again - The silly little microscopic manual they sent with it wasn't helping at all
It's been working really good for me no problems working on more than a year 💯 I have my TV microwave PlayStation, 5 a fan water pump for shower I mean nothing went wrong yet
GREAT REVEIW OF THIS PARTICULAR MPPT CHARGE CONTROLLER . KEEP IT UP AND RUNNING YOUR RV .🤗
I'd say this was pretty informative. Not much of a tutorial like every other video on UA-cam, but life advice that could help me big time. Thanks!
You're welcome!!
Thanks for watching!!
Bro thanks you for that video, I too order that controller , but is come only January 15 , very long , only you full show about that controller, thanks you!
Thank you for this info. I was stumped. Will put mine on universal.
💯
Your video was the only one that helped me.
Im glad there is some helpful information in the video to help others. Thanks for watching!!
Thank you for this informative video. Helped alot. Please how do i configure a setup for when the inverter starts to beep for low battery. Thank you.
i used that solar controller for almost a year now, one is 80 amperes and 100 amperes, its work well , its not a real mppt but its better than pwm when it comes to charging, it was cheap ,it cost me 1000 philippine pesos ($20) for the 100 amperes for this controller, great set up for beginner and fits for your budget..
I agree to that it's a great device and it does the job to get it done when it comes to charging from my perspective there's not a lot of videos on it but I thought I should try to help people that's looking for more information on how to use it and you're right it's not the best out there but it's good for beginners and it gets the job done 💯
I appreciate you for watching!!
@openmindentertainment877 keep it up and make more video to come...
some say a 100a, would it be any good for me if I have x4 400w solar panels??
@@manongkalikot4008 hi sir, after peessing reset for 5 sec I'm not getting High and low voltage setting please let me know what shoild I do?
Thank you. I just bought one working very well. To get the light to come on is all i have to do is hit the button on the right? Thanks again.
Why won't mine charge my lithium battery past 13.3 volts?
Thanks for the video. Just got one of these and can't get it to start charging. Did you have to tirn on some setting to get it to charge? I tried IUnversal and Manual mode but it always shows 0.0 amps from the panels. Definitely have juice coming in and the connections look solid. Frustrating! Hope it ain't dead. Thanks for any help.
Try it in these exact steps turn everything off plug up the battery first then solar panels last... Make sure wires are not corroded.. solar panels getting power but you do not see charge on the panel device? try checking that all connectors are connected and tight from panel to charging device solar port.. if none of those options are working sometimes the device may be defected you can try a 12 volt battery tester and put the two prongs on the positive and negative side during daytime hours to see if you're getting 12 volts coming through the wiring from the panels if it lights up it's working fine but if you're still not getting any reading on the device then the device may not be working properly other words defective I appreciate you for watching my videos I hope something I mention is able to help you out.. stay tuned for my follow-up video on the charging device I will show some things that could probably help others when it's not charging during daytime hours
Don't forget to like and subscribe!!
@@yomontOME Thanks! I tried a bunch of stuff but it just won't charge. From reviews it looks like I'm not the only one. Too bad. Luckily I have an older 60A charger that should do the job. I appreciate your taking the time to help! Good luck with your solar system.
I have another follow up video later when I have everything running and power it up stay tuned don't forget to like and subscribe!!
I have the first charging option turned on in all circumstances, when the battery is charging, does the charge controller turn off? I feel like it is still charging and I haven't seen it interrupt charging. What does it look like when the controller detects that the battery is sufficiently charged? What does the controller do? How does it behave?
Hi and thanks for the information but can I ask you will this work with a wind turbine?
Anything is possible if it provides the right amount of voltage ⚡️ 💯
I bought one mppt charge controller with 1.2 inverter and 220ah but it use to go down why 😢 please need more explanation to me
Olá, adquiri um desse de 100A e quero colocar até 6 placas de 155w, em uma bateria de 100Ah ou 234Ah, será que dará certo?
Yes it will work 💯
100AH lifepo battery normally can charge half so 50amp but that max most i think are down at 20amp charge cycle that just the charge side the bigger AH the better with this charger so up to 200AH at max charge 100amp but you need the input from solar to give that much think of head 2.4kw max so 3kw of solar i dont know any panels giving there max but thia geuss and not done working it out i dont do math
That's pretty awesome brother talk about living off the grid
💯
Does it keep flashing battery zero. I was worried that means like q.5 A on pv but 0 gpong to battery. May be wait for full sunshine. Ser if still 0
If the battery is fully charged you will not get no voltage to charge the battery from the device it will stay to a bare minimum until the battery start losing charge then you will gain voltage to keep the battery at charge state once you start using axillary
Yeah, I watched a Part 2 video, Think you said is out going Amps not incoming Amps, Thanks again for your videos@@yomontOME
Very Cool , glad u got Power 👽👍
Stay tuned for my next video living off grid
Does it have a function to let the charge controller know what type of battery you are using
Great question The device detects all batteries on its own Automatically
Do you know how to reset the low voltage fault without taking the battery off ?
Thanks i put in the model number on UA-cam and see only 2 vid but short or so quick had no information so thanks don't suppose for other people you could add the model numbers in your search more people will find yoir video mine was 100amp but know are about 6 in all on the box happy new year
Thank you for your comment I really appreciate you for watching I will take in consideration to putting up my serial number and a new video stay tuned for a follow-up video!!
This charge controller can't handle a lot of power
I bought this charge controller and it's loses power because it's not a real mppt charge controller
@@andreengland2279 do you think it loses power because the battery is almost fully charged? Normally when it loses power is because the battery is almost to fully charged or is currently finished charging you will then notice the voltage drop down to 0. 3 💯 just enough to keep it from dropping voltage..
At the instructions says is not real MPPT what does he mean?
I can say that there will always be other brands that are better but from what I can see from my usage of this particular item it works very well and I haven't had any problems but that's just my opinion 💯 I appreciate you for watching my videos!!
I am using LiPO4 battery, how can I reach the floating voltage adjustment step? How can I adjust the floating voltage?
I would like to ask those who have information to help
Please stay tuned for my next video
Hey did u get the solution about how to set floating voltage?
In video he said press reset button to set high and low but my mppt is showing nothing
I could not reach the floating voltage adjustment step of this device. Additionally, I see that there is no possibility of adjusting the charging current of this device. I plan to use this device to support the battery charging MPPT output of the solar inverter. I would like my friends who are making applications on this subject or have knowledge about the things I am trying to learn to support me.
I will do another video soon. Please stay tuned I appreciate you for watching!!
Hey I've set my ups with floating voltage 13.8(charging from source) and mppt I've directpy connected with battery to charge from solar but im not geeting an option for high and low vlotage after pressing reset button as a result I dont know the high voltage of mmpt so when charging from solar it is sbowing me overcharge issue, please help
pretty much this, pretty much that, and pretty much any pretty much thing, and pretty much
Top man - was stumped with mine as I had lost load ability - But yea, back on universal control she's all tickety-boo again - The silly little microscopic manual they sent with it wasn't helping at all
I am afraid these are PWM not MPPT as they state.
It's been working really good for me no problems working on more than a year 💯 I have my TV microwave PlayStation, 5 a fan water pump for shower I mean nothing went wrong yet
@@yomontOMESorry, I did not say it does not work, it is not what is is described as.