How to replace your SUZUKI ANODES and Properly Flush that CRAP out of your Block!
Вставка
- Опубліковано 30 вер 2024
- Don't wait until it's TOO LATE! Do this every 100 hours! Suzuki 200 outboard internal anode replacement, water valve (poppet valve) replacement, and the correct way to flush your block! Suzuki 200 hour service!
#suzuki
#outboardmotor
#maintenance
**CHARTER TRIPS**
Call Captain Jody at 251-465-1598 for your next Alabama or Mississippi Flounder gigging or Saltwater Bow Fishing Charter!
Visit my website at bayoubanditcha....
Join my Facebook group--- / 284925919867754
**BIG THANKS TO MY SPONSORS**
FISHBITES---fishbites.com/
5 Star LEDs---5starledllc.com/
SORD KNIVES--www.sordfishin...
POWER-POLE---performancefis...
BOUTWELL CANE POLES---334-493-3374 or 334-504-4706
HOBO CUSTOM RODS--- / hobo-custom-rods-llc-1...
Performance Fishing Electronics---performancefis...
Fish 419 Performance Gear discount link--fish419.com/di...
Hawk soap company-SKEET-R-HAWK all natural bug repellent-- use discount code 15BAYOUBANDIT---hawksoapco.com/
[Fishing Gulf of Mexico, Offshore, Nearshore, Beaches, Surf, Bays, Saltwater Canals, Rivers, Piers, Lagoons, Rigs, Reefs, Wrecks, Jetties in Gulf Shores, Orange Beach, and Fort Morgan, Pascagoula, flounder gigging, saltwater bow fishing, Dauphin Island, flounder fishing, fluke fishing, how to, red fishing, marsh, bayou, Mobile Bay, Bayou La Batre]
Part number for the zinc anodes 55321-87J01
10/12 ga shotgun brush fit them anode holes? attach to a drill...zoom zoom
Excellent Captain, really explained the procedure well. Folks should be jumping on your channel. Hope you had a wonderful Thanksgiving. My best to your continued success
Thanks so much!
I wish I could put grease on my fingers. Can’t do it. Great video. I’m gonna watch your 100hr maintenance one next. I have a 50hp Suzuki
I use marine anti seize instead of grease. Also use silicon grease on the o rings, marine grease can degrade them. May be a little OCD. Good tip on the flush.
Hi Jody..exellent content, I have a question. When you were looking at the 200's did the SS model interest you at all, I realize there are some differences I just thought to ask. Thank you for your vids!!
Thanks for this video. And can you help us. Many people with small engines Suzuki DF20A have problems with clogged coolingchannels in this motors. We change anodes, thermostat every year, but after 8-9 seasons engines stop running. The temperature at some point rising above 80° .What can we do to solve this problem?
Do you know if the part numbers and maintenance steps you take on your 200 are the same for a 2019 DF 250?
Thanks for taking time to make these thorough DIY videos! I have a 2023 Carolina Skiff w/ a 200 Suzuki as well and these videos will help me immensely. I also just got a 2024 Honda Rubicon and found you have the 23 with DIY videos for that as well!! You da man! Thank you!
Heck yeah brother, lol! Thanks man, glad to help!
Great video! How you can run the water in the block with the thermostat! Did you removed previously? Thanks
The thermostat is at the very top of the motor, I'm flushing the junk out of the anode holes which are lower.
Hi.
Can you please confirm total number of anodes existing for this motor?
I see the 5 x anodes changed out here, but what other anodes exist and where?
Thanks
Cameron
Only 5 internal anodes
Soak those anodes in rydlyme overnight and it will eat the salt right off. Salt off good for maintenance but a marine de scaler will rip right through thick scale
Yea dude rydlyme 100% or squirt a whole bottle of lime away in the top hole let sit then vacuum out
And then rinse with water and vaccine out again
Good video but what year was this df200?
2022
How many hours before we check that section?
I pull, inspect, and clean everything 100 hours. Replace when 1/2 gone.
Excellent thanks
Thanks for commenting, happy to help!
Very good video
Thanks brother!
Doesn’t hurt to do a freshwater flush every now and again. I’m just surprised that Suzuki made to 200 hours.
I flush with Salt-A-Way after every trip!
I’m about to be the owner of my 1st Suzuki 2009 250 4stroke. 650 hours. I think it’s been regularly serviced but idk. Maybe I should open it up and look at the anodes and thermostat. Thank you
Yes. Anytime I buy a used outboard, the first thing I do is a full service!
Thanks for this. Great video. I'm new to outboards and have taken the easy way out and had my new suzuki 115 into the shop for its last two services. Just hit the 90 hours and want to start learning what I can do myself. Anodes done thanks to you.
Thanks brother, happy to help!
Excellent service videos! You are going to save me thousands over the years for the unnesessary labor charges. I am about to do my 100hr. Did you use the vice grip on the shift rod method when dropping the lower unit during your 200hr? Wondering if that was the best method to help you get the lower unit back installed?
Yes sir! The vice grips are definitely the way to go! Thanks for your comment brother!
Great video Capt always enjoy your videos especially your maintenance on your engine. Thanks. Tight lines 🎣
Thanks brother, definitely appreciate it!
Just discovered an oil change costs $1000. Looks like I"m doing this myslef
Yes sir! You can do it with no problems!
Deserves a thumbs up. Not my motor but lots of applicable advice. Thanks Bubba.
Thanks brother, I appreciate the comment!
Awesome job with your video. I subscribed for your fishing information and lo and behold I’m benefiting from your boat motor content!! So glad I found you!
Thanks you brother, glad to help!
Mate that's the best detailed and best shown video on how to do stuff to your outboard! im now doing all my own services from watching your vids and saving me $$$$ thanks dude :)
Thanks brother, I’m happy to help!
awesome video, is this similar process for suzuki 300 hp engines?
Yes sir!
This is an outstanding video.
Thanks brother, happy to help!
Good video but please stop swaying.
I enjoy the swaying
Hey Cap do you you salt away everytime you go in saltwater. Also what dealer do you get your bulk oil from.sir
Yes sir! L&M marine in Stockton Alabama
Thanks capt
Thank you.
I have a 2023 200 APX with its very first 100 hour service due in Sept this year.
What additional work (in addition to tasks specified in OEM spec) would you suggest I get done for this service?
For replacement time, What material anode do you recommend for this 2023 block - zinc or aluminium?
I’m interested in that cut off switch used for the remote flush port used with hose. Can you provide more details on this cut off switch?
Thank you.
Cameron
I would recommend spraying the whole engine (everything under the motor cover) down with Corrosion X as in this video link. Zinc for saltwater, Home Depot for the cut off on hose. ua-cam.com/video/k1VyVnPR-ok/v-deo.htmlsi=U5Ggd0Y3pAFsN76k
@@bayoubanditcharters many thanks.
@@bayoubanditcharters hi again. I am sorry to bother you again. I’m from Australia and we do not have any ‘Home Depot’ stores.
Can you possibly provide a close up photo of this cut off hose/switch you use for the flush port? I’m really keen to acquire one. Thank uou
@@Camh1968 any hardware store should have them. Amazon has them as well. “Water hose cut off valve”
@@bayoubanditcharters many thanks
Where do you get the 10mm 1.25 pitch thread bolt?
You can get one at any hardware store or Home Depot
@@bayoubanditchartersgreat video! I got my jack off bolt at o’reilly auto store.
Excellent video!
Thanks brother, happy to help!
Great video. 👍
Thanks brother!
I really enjoy your videos I'm looking at repowering with a Suzuki greetings from NJ
Thanks brother!
Do you flush your engine regularly also after You have been running in salt water
Yes religiously! Salt-A-Way after every trip!
Do you have to winterize in La ?
I live in South Alabama and run charter trips all year long, so I don’t. I do trim my motor all the way down when temperatures get below freezing to prevent any trapped water from freezing in my lower unit
Thanks!
Thank you brother! I definitely appreciate it!
Merci superbe vidéo
Thanks brother!
Did you change with zinc or aluminum?
There were no part numbers for the anodes in either video
Zinc
55321-87J01
Thanks! Awesome DIY by the way they have been very helpful
Thanks brother! If you don’t have a local dealer, use boats.net to find your parts!
I couldn’t get past your opening spill. The rocking you do while talking gave me motion sickness.