In Orlando, Florida this product is especially needed. The seedy and cheap hotels hire security guards that are secretly-thieves and Meth-Heads. They will watch you as a group and the moment you leave your hotel room one of them will make a key and go into your room and take whatever he or she wants. Later when you return these employees will lie as a group to upper management and have you ejected or trespassed from the hotel as a trouble maker. This is an increasingly recurrent theme at the small hotels along the International Drive. If you videotape one of them breaking into your room the owners usually settle out of court for a good amount of change. these groups of hotel employees and security guards target mainly couples and single men or women.
I do not think there is a limit. I have 5 without any problem. The app allows you to view live video of 4 at the same time by dividing the screen into 4 quadrants. Then you can view any one of them with a full screen
I don't have this particular camera but the software is all the same. I had one of my cams working fine online. Then it just quit. I haven't been able to reconnect. Even bought new camera's and having the same problems. I don't know if it is an app glitch or I am just that stupid. : )
I believe that the P2P servers that the app connects to are no longer operational. So unless the servers are reinstated, you will not be able to remotely connect to your cameras with the app.
Yes, it must be connected to a wifi network if the original network is out of range. Without a wifi connection, it cannot transmit over the internet. Likewise, with the P2P servers out of commission since Aug/2019, the video can longer be viewed remotely anymore. So, do not buy this camera!
Hello the loop recording is not working its automatically stop when the sd card is full it does not overwrite the old vid to continue recording i must delete the old vid to be able to continue it recording even thou i enable the loop recording,,how to fix?
The app will not work unless it can establish a connection to the servers that are supposedly no longer operational. I am researching a way to remotely connect with a web browser, but that entails some router configurations. Plus, you will not have the features that the app provides you (other than just watching live video)
The apps iMinicam or HDMinicam are no longer available on ios app store. Cannot use clock/camera without the app. Can you please tell me where to obtain software? I have looked everywhere and tried everything I can think of. Thank you.
The camera is unsupported since August/2019. So the app has been removed from the Google/Apple stores. There is nowhere else to get it for Apple, but you can still get it from here for Android: apkfab.com/developer/gang.zhang Since the app is unsupported, there is no P2P server to connect to anymore. That means you cannot view your camera from outside your wifi area. Get a refund if you recently purchased your camera!
Hello, Can you please advise how to set the camera to continue recording even if I exit the smartphone app ? I need to put it on continious record for 2 hours independently of my phone. Now when I exit the app the recording stop. How to make it continue for a longer time?
The camera has two recording modes. Apparently, you are using the mode that is turned on from the "Live Video" screen and stores the video on your phone. Once you exit the screen, the recording stops. This mode is intended to capture things spontaneously at your discretion. The other mode of recording stores the video on the SD card in the camera -- not on the storage of your phone. It allows you to record upon motion detection or on a given schedule such as all-day or during certain hours. This is the feature you are looking for. To access it, select "Advance Config" (or "Device Settings" on Apple). From there select "SDCard Config" to configure the recording schedule. Then later, select "Alarm Config" for additional options.
Videos that you manually record from your phone are under "record" from the bottom of the main screen. From there you will have to choose a source camera (if you have more than one) by tapping on the funnel icon at the top right corner. Then you will have to tap on the pull-down menu to choose the type of recording. "Local" are the recordings that you manually initiated from your phone and stored there. "Remote SD Card" are the recordings that are created by the alarm (I.e. motion detection or "All Day") and stored on the camera's SD card (not on the phone). Note that the Apple version of the app displays icons instead of words for some of these options.
Yes, any number of of phones should be able to connect to the same camera. A more common question is how many cameras can the phone app connect to. The app can display up to 4 cameras simultaneously in a matrix, but can probably connect to more at the same time. I read 10 but I have no way to test that claim.
All the apps that the camera support have been removed from the Apple/Google stores. So if you have an Apple device, there is nowhere to download the app. Android you can, but the functionality of the camera has diminished since the P2P servers were taken down last year.
I enjoyed the video of how to set it up. The set up is the same as what I have done. I see in your demo you switch off Wireless networks and go to data, but my app keeps looking for CAM and timesout. When I switch off wireless off my phone, it shows it in logging in but never does. Any ideas? So at the moment it works when I am in the same wireless location but when I go out, I cannot view LIVE video from another location.
I guess you missed my posts for the last 6 months. The reason why you cannot make remote connections is because the P2P servers have not been operational since Aug/2019. They came back up for a few weeks in November, but have been down after that. The apps that run from your phone have been taken down from the Google/Apple Play stores. So, it would seem that the camera is no longer supported by anyone. If you bought your camera recently, get yourself a refund while you can (especially if you paid with Paypal). As a workaround, if your PC is on the same network as your camera, you can access your PC remotely with remote desktop software (such as Teamviewer or Google Remote Desktop) and view your camera from your PC's browser.
If you recently purchased your camera, get yourself a refund. The P2P server that the camera relies on for remote connections has been inoperational since August/2019. And the app has been removed from the Apple/Google stores. This suggests that the camera is no longer supported and has outlived its usefulness
The camera needs an SD card to save anything it records. Use at least a class 10 8 gb card. Most cards are at least class 10, but some may be a lower (slower) class.
Yes, it should be able to connect from anywhere in the world. When you are in the house, your smart phone and camera are communicating only through wifi. When you are away from home, there is a bit more communication hopping going on. Your smart phone communicates through the internet to handshake with your modem. Your modem passes the information to your router and the camera communicates with the router through a wifi signal. And who knows what else is going on. As a test, I would position the camera next to the router to determine if your smart phone can connect to the camera. There, the wifi signal would be strongest for the camera to communicate with the router.
Lacey, I had a similar problem with my mom's camera who lives 600km away. My smart phone could not connect to her camera. I had her reboot the camera and that worked for a few minutes. Then I had the camera rebooted by its switch. That worked for a few months. Now it's off-line again and there is nobody there to get it going again. Anyway, the only thing that I can suggest is to reboot the camera a few times. If that does not work, try doing a complete reset by holding down the button in the pinhole. (BTW, my mom's camera is not the same as the one in the video, but it is similar. My own personal camera which is the same as my mom's has never given me any connection problems... yet) Other than that, I am out of options. Let me know if you find a solution.
The intent of the battery is to serve as a backup in case of a power failure. You should run the device from an electrical outlet. But in answer to your question, the battery should last 2-3 of hours. However, I noticed with my camera, it is more difficult to connect when running from the battery; the camera goes off line. Once power is restored, the camera seems to work normally. I have not investigated this issue deeply because I have little need to run from the battery.
The app keeps telling me incorrect UID even when I scan it or enter manually. the phone says I'm connected to the clock wifi, but it doesn't show up in the app?
Go to the Google Play store and find other apps written by the same programmer. They are all virtually identical. So do a search for "Zhang Gang". In addition to iminicam, two other apps that work for me are MUcam and P2PLIveCam. Last year HDminicam stopped accepting my UID.
Do not confuse "reset" with "reboot." You need to gently press the reset button with a pin for 5 seconds. This is not the same as sliding the power button off and on, which simply reboots the camera. Do not press the rest button too hard or you may dislodge it from its circuit board.
From the app, click on "Live Video" at the bottom of the screen. Then click on the name of your camera. If you want to watch continuously from the office, you may prefer to use the PC app (IP Camera) so you can watch the video from your larger PC screen instead. Let me know if you need more details about that.
@@igfishing13, Aside from the instructions I gave earlier, make sure that you went into "wifi config" (under "Advance Config" or "Device Settings") to connect your camera to your WiFi network.
@@igfishing13 ,I have often noticed that connecting to the camera fails from a commercial location with free wifi. Maybe they have some filters that prevent these types of connections? Connecting from someone's home wifi is more reliable. I also suspect that if you persist in making the connection, the camera can go off-line, which requires you to re-boot the camera to bring it back online.
I just want to get rid of the blue light showing the time, it gets too bright when I go to sleep, yes I have the camera in my room, it works perfectly fine but I wish there was and option to turn off the blue light and have the camera work at the same time.
Some models allow you to turn off the clock display. From the top of the "Live Video" screen there is a ribbon of controls (such as brightness and contrast). One of the controls is shaped like a "T". If it is present, the display can be turned off by touching it.
That's actually good news because when there are buttons you must set the time manually (usually). But when there are no buttons, the time is obtained automatically from the internet. You just need to set the camera to your time zone.
You should only reset once so that you can connect your camera to your wifi network. Once you establish a connection, you do not need to reset again. If you do, you will have to reconfigure all the settings again including the password and the scheduling of when the camera records. That said, a reboot is not a reset. So you can reboot as many times as you like without losing any of your settings.
you all prolly dont care at all but does any of you know a trick to log back into an Instagram account..? I somehow forgot my password. I would appreciate any tricks you can offer me!
@Lukas Ethan I really appreciate your reply. I got to the site through google and im trying it out atm. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
I do not have this camera, but I have a similar one that uses the same app. So maybe what I tell you will work for your camera. The only MAC address that I found (labeled WiFi MAC) is through the web version of IP Cam, but you will need to know the IP address of the camera which you can only obtain from the smart phone app. Except for the last digit, the IP address should be the same as mine: 192.168.1.3. If not, just go sequentially through all the numbers. Hopefully yours is nearby and not near the 100 range. Once you have the IP address, type it into the address bar of your browser (I use Firefox and Chrome). When it prompts you for a user id and password, use "admin" for the user id and leave the password blank. The next screen will ask you to select a browser. Choose the second one listed, "Non-IE Web Browsers" On the next screen there is a pane of camera control icons. Click the gear wheel on the bottom (or at the top if it's there instead). The next screen should show the WiFi MAC address. If it does not, select "System > About" from the left margin. If the text in the left margin is in Chinese, exit the screen and try again or try a different browser.
The app has been removed from the Apple/Google stores because the camera is no longer supported. Get yourself a refund while you can if you recently bought yours
There are several apps that you can use. They are all written by the same programmer. They are all virtually identical. So do a search on "Zhang Gang." That will yield you apps such as HDminicam, iminicam, P2Plivecam, MUcam, and a few others. Some may not work with the camera id your camera has. I find the MUCam accepts all the ids I have provided it.
Are you sure this particular camera has an alarm clock? I think it only has a clock but no alarm (other than the motion detection alarm) to ring at a certain time,
It's been removed from both Apple and Google stores.. Nothing can be done for Apple, but you can still get it for Android If you paid with Paypal or bought your camera on Amazon, eBay, or Ali Express, request a refund ASAP. It looks like all these cameras have been discontinued from manufacture ever since the P2P servers were brought down last year. Sellers are just getting rid of their existing inventory to unsuspecting buyers like yourself
It does work with iphone and ipad, but since the app has been removed from the Apple store (and Google store), there is nowhere else to install it from. Do not buy this camera
I have one camera that gives me the same message when I attempt to have more than 5 connections to it at the same time. My other cameras do not seem to have this limitation (or have a higher limit)
It looks like a typical clock. I would not think anyone would give it a second glance were they to walk in the room.Only the time shows, in digital form of course.The numbers are blue. I see no other lights when it is connected. I just received mine today and literally just set it up an hour ago! So far pleased with the purchase. I will mention that the battery life is only 30-40 mins., so you pretty much have to leave it plugged in unless you want to just set it somewhere for that short period. I will say one thing, I took a photo of the clock close-up, and in the photo I can see 6 little faint green lights which I guess are the cameras. These cannot be seen with the naked eye however. Even so I don't think anyone would particularly notice this in a photo unless they were specifically looking for it and knew what it was. Also don't think it would show up in a photo taken from a regular distance. Hope this helps.
You no if you wont to check the carma on your phone do you need a WiFi link were you are. Or does it not matter because it uses your own WiFi were ever you got the camra set up
@@amagenarypowers9313, your smart phone should be able to connect to the camera from anywhere around the world, provided that your smart phone has an internet connection and your camera is at home connected to your home WiFi
Each camera has a unique user id (UID) and a default password of 8888. The PC app and the web browser interface has its own login credentials. The user id is admin and the password is left empty
Hi can u guide me how to set it up? I already connected it to my phone, but now its always offline after i connect it to our home wifi I also tried to reset but nothing happens.
I do not think there is a limit as to how many cameras you can connect to. In fact the phone app provides a grid of 4 quadrants on your screen where you can simultaneously watch the live video of up to 4 cameras. I have 5 cameras connected without any problem. Of course, you can use the entire screen to watch the live video of any single camera. Moreover, the PC app can divide the screen in various formats, the largest being 36 quadrants for 36 cameras! To connect a second camera to your phone, simply add it the exact same way you added the first camera. You may want to give each camera a name on the app so that you know which camera you are looking at.
Hi.....I was trying to reconnect my camera to my phone the same way I did before.but don't let me keep saying camera reboot I restarted over and don't connect
@@alexarteaga8245, you cannot connect to your camera until the reboot process completes. If it does not complete, reboot the camera using the on/off switch in the rear. Exit the app (better still, reboot your phone), so that the app does not mistakenly think that the camera is rebooting. If you still have problem, try resetting the camera instead, by pushing the button near the on/off switch with a pin. Exit the app (or reboot your phone) and the go into the app again. Since you did a camera "reset," you will have to configure the camera again exactly as you did when you bought it out of the box.
You need to provide more information. First, connect your phone to the camera's wifi signal. If the camera's wifi signal is not listed on the phone's screen, reset the camera by gently pressing the reset button with a pin for 5 seconds. Do not press too hard or you may dislodge the button from its circuit board. Once you are connected, go into the app's "Advanced Config" (or "Device Settings" on Apple) and select "WIFI Config" from the menu list. Then from the pull down menu, connect the camera to your home wifi using your home wifi password. Now you can disconnect your phone from the camera's wifi signal and reconnect it back to your home wifi signal. Since both your camera and phone are now connected to your home wifi, they should both be able to communicate with one another, even after you leave your home.
@@nightflash1352: Yes, he is resetting the camera correctly -- the same as I explained. After you reset, the camera should appear on list of WIFI networks on you smart phone.
Teo P you see wen you open your app iminicam I get the same blue background but there no little box on mine were you press on it to bring up the live camera
Click on "Live Video" at the bottom of your screen. Press on the the name of your camera for 2 seconds until a menu pops up select the 4th item of the menu, "Advance Config" (or "Device Options" on Apple) Select :"SDCard Record Config" from the next menu Select "All Day" from the pull-down menu of the next screen. (Are you sure you want this option? I think it is better to record whenever the camera detects motion rather than all day) Click on "OK" to save your selection.
You can view the live video of your house from anywhere around the world as long as both the camera and your smart phone have a WiFi or internet connection.
To reset the password back to 8888, gently push the rest button with a pin for 5 seconds. Do not push too hard or you may dislodge the button from its circuit board
@@alexarteaga8245, I have 5 cameras connected. I don't think there is any limit of how many connections you can have, but you can only view up to 4 at the same time. Normally however, you would probably watch the live video of one camera at a time since your phone screen is rather small to watch more than one simultaneously.
The defaut password is 8888. If you forgot your password, you must reset it by resetting the camera by gently pressing the reset button with a pin for 5 seconds. Do not press too hard or you may dislodge the button from its circuit board.
This camera is terrible!!! It's the 2nd camera they sent and both were bad! Under setting it doesn't have the option to setup the camera!! It shows Modify Delete or Reconnect only!! No Advanced Config!! I don't want a 3rd camera I want my money back!!!!
The "Advance Config" (or "Device Settings" on Apple) is only listed when the camera is connected to the wifi network. If it is no connected, your smart phone has no way to communicate with the camera to configure it. Here is how to connect to it: First, connect your phone to the camera's wifi signal. If the camera's wifi signal is not listed on the phone's screen, reset the camera by gently pressing the reset button with a pin for 5 seconds. Do not press too hard or you may dislodge the button from its circuit board. Once you are connected, go into the app's "Advanced Config" (or "Device Settings" on Apple) and select "WIFI Config" from the menu list. Then from the pull down menu, connect the camera to your home wifi using your home wifi password. Now you can disconnect your phone from the camera's wifi signal and reconnect it back to your home wifi signal. Since both your camera and phone are now connected to your home wifi, they should both be able to communicate with one another, even after you leave your home.
The camera is unsupported since August/2019. So the app has been removed from the Google/Apple stores. There is nowhere else to get it for Apple, but you can still get it from here for Android: apkfab.com/developer/gang.zhang Since the app is unsupported, there is no P2P server to connect to anymore. That means you cannot view your camera from outside your wifi area. Get a refund if you recently purchased your camera!
I assume you mean that you want to view the video of the camera on your Samsung Note 4 smart phone. To do this download and install the iMiniCam app from the Google Play store: goo.gl/znCUNp
Nice but can it still use as a alarm clock?
None of these cameras I have seen have an alarm clock to wake you up.
very clear video thank you
nice clock camera
In Orlando, Florida this product is especially needed. The seedy and cheap hotels hire security guards that are secretly-thieves and Meth-Heads. They will watch you as a group and the moment you leave your hotel room one of them will make a key and go into your room and take whatever he or she wants. Later when you return these employees will lie as a group to upper management and have you ejected or trespassed from the hotel as a trouble maker. This is an increasingly recurrent theme at the small hotels along the International Drive. If you videotape one of them breaking into your room the owners usually settle out of court for a good amount of change. these groups of hotel employees and security guards target mainly couples and single men or women.
Thank you your video was very helpful just one question how many cameras can I conect to the minicam app
I do not think there is a limit. I have 5 without any problem. The app allows you to view live video of 4 at the same time by dividing the screen into 4 quadrants. Then you can view any one of them with a full screen
I don't have this particular camera but the software is all the same. I had one of my cams working fine online. Then it just quit. I haven't been able to reconnect. Even bought new camera's and having the same problems. I don't know if it is an app glitch or I am just that stupid. : )
I believe that the P2P servers that the app connects to are no longer operational. So unless the servers are reinstated, you will not be able to remotely connect to your cameras with the app.
Thanks for your info. It was very helpful:)
Let me know if you get your camera connected to you WiFi network
Do you have manual for computer setup?
I've throw mine away so I can't access cam via pc
If you move the “alarm clock” to another household. Does it have to connect to their wifi in order to see a live video?
Yes, it must be connected to a wifi network if the original network is out of range. Without a wifi connection, it cannot transmit over the internet. Likewise, with the P2P servers out of commission since Aug/2019, the video can longer be viewed remotely anymore. So, do not buy this camera!
Can you show videos about the app on the Play Store for Samsung Galaxy a10e
Hello the loop recording is not working its automatically stop when the sd card is full it does not overwrite the old vid to continue recording i must delete the old vid to be able to continue it recording even thou i enable the loop recording,,how to fix?
Me too. I can connect with Wifi during at office. but keep showing logging in when away from office. Any solutions?
The app will not work unless it can establish a connection to the servers that are supposedly no longer operational. I am researching a way to remotely connect with a web browser, but that entails some router configurations. Plus, you will not have the features that the app provides you (other than just watching live video)
The apps iMinicam or HDMinicam are no longer available on ios app store. Cannot use clock/camera without the app. Can you please tell me where to obtain software? I have looked everywhere and tried everything I can think of. Thank you.
The camera is unsupported since August/2019. So the app has been removed from the Google/Apple stores. There is nowhere else to get it for Apple, but you can still get it from here for Android: apkfab.com/developer/gang.zhang
Since the app is unsupported, there is no P2P server to connect to anymore. That means you cannot view your camera from outside your wifi area.
Get a refund if you recently purchased your camera!
@@dkyrtata6688 thank you.
Hello,
Can you please advise how to set the camera to continue recording even if I exit the smartphone app ? I need to put it on continious record for 2 hours independently of my phone. Now when I exit the app the recording stop. How to make it continue for a longer time?
The camera has two recording modes. Apparently, you are using the mode that is turned on from the "Live Video" screen and stores the video on your phone. Once you exit the screen, the recording stops. This mode is intended to capture things spontaneously at your discretion.
The other mode of recording stores the video on the SD card in the camera -- not on the storage of your phone. It allows you to record upon motion detection or on a given schedule such as all-day or during certain hours. This is the feature you are looking for.
To access it, select "Advance Config" (or "Device Settings" on Apple). From there select "SDCard Config" to configure the recording schedule. Then later, select "Alarm Config" for additional options.
How n where do you see the videos that you recorded please
Videos that you manually record from your phone are under "record" from the bottom of the main screen. From there you will have to choose a source camera (if you have more than one) by tapping on the funnel icon at the top right corner.
Then you will have to tap on the pull-down menu to choose the type of recording.
"Local" are the recordings that you manually initiated from your phone and stored there.
"Remote SD Card" are the recordings that are created by the alarm (I.e. motion detection or "All Day") and stored on the camera's SD card (not on the phone).
Note that the Apple version of the app displays icons instead of words for some of these options.
Hello , is possible connect 2 phones at the same time?
Yes, any number of of phones should be able to connect to the same camera. A more common question is how many cameras can the phone app connect to. The app can display up to 4 cameras simultaneously in a matrix, but can probably connect to more at the same time. I read 10 but I have no way to test that claim.
There is no iminicam in the apple app store... What other app can we get?
All the apps that the camera support have been removed from the Apple/Google stores. So if you have an Apple device, there is nowhere to download the app. Android you can, but the functionality of the camera has diminished since the P2P servers were taken down last year.
I enjoyed the video of how to set it up. The set up is the same as what I have done. I see in your demo you switch off Wireless networks and go to data, but my app keeps looking for CAM and timesout.
When I switch off wireless off my phone, it shows it in logging in but never does. Any ideas? So at the moment it works when I am in the same wireless location but when I go out, I cannot view LIVE video from another location.
I guess you missed my posts for the last 6 months. The reason why you cannot make remote connections is because the P2P servers have not been operational since Aug/2019. They came back up for a few weeks in November, but have been down after that.
The apps that run from your phone have been taken down from the Google/Apple Play stores. So, it would seem that the camera is no longer supported by anyone.
If you bought your camera recently, get yourself a refund while you can (especially if you paid with Paypal).
As a workaround, if your PC is on the same network as your camera, you can access your PC remotely with remote desktop software (such as Teamviewer or Google Remote Desktop) and view your camera from your PC's browser.
If you recently purchased your camera, get yourself a refund. The P2P server that the camera relies on for remote connections has been inoperational since August/2019. And the app has been removed from the Apple/Google stores. This suggests that the camera is no longer supported and has outlived its usefulness
is this posible anywhere? or I mean does the app is available every country?
How do you get it off military time?
Thank you
Are any of these things made in America ?
it works great for me :)
How do i sent it back and get my money back this just fraud its sucks and not work
If you purchased on eBay or paid with Paypal, put in a claim. Otherwise, you may not have many options. What is your complaint?
How come wen I leave my house it stops recording help isit because I need a sd card putting in the back of my camera
The camera needs an SD card to save anything it records. Use at least a class 10 8 gb card. Most cards are at least class 10, but some may be a lower (slower) class.
Does it work away from the house? Every time I try to connect to home Wifi it says connection timed out
Yes, it should be able to connect from anywhere in the world. When you are in the house, your smart phone and camera are communicating only through wifi. When you are away from home, there is a bit more communication hopping going on. Your smart phone communicates through the internet to handshake with your modem. Your modem passes the information to your router and the camera communicates with the router through a wifi signal. And who knows what else is going on.
As a test, I would position the camera next to the router to determine if your smart phone can connect to the camera. There, the wifi signal would be strongest for the camera to communicate with the router.
Dkyrtata it just keeps saying timed out. I’ve tried two different routers
Lacey,
I had a similar problem with my mom's camera who lives 600km away. My smart phone could not connect to her camera. I had her reboot the camera and that worked for a few minutes. Then I had the camera rebooted by its switch. That worked for a few months. Now it's off-line again and there is nobody there to get it going again.
Anyway, the only thing that I can suggest is to reboot the camera a few times. If that does not work, try doing a complete reset by holding down the button in the pinhole. (BTW, my mom's camera is not the same as the one in the video, but it is similar. My own personal camera which is the same as my mom's has never given me any connection problems... yet) Other than that, I am out of options.
Let me know if you find a solution.
The cam I bought does not have the battery + I cannot connect with my DATA connection. It reboots forever. I cannot refresh either.
Hello I have a problem by connecting it keeps saying that cam is offline
That is correct. The camera is unsupported and not functional anymore ever since the P2P servers were brought down in Aug/2019
you are normal, you show from half way
How long the battery lasts in case of leaving from house for a long period?
The intent of the battery is to serve as a backup in case of a power failure. You should run the device from an electrical outlet. But in answer to your question, the battery should last 2-3 of hours.
However, I noticed with my camera, it is more difficult to connect when running from the battery; the camera goes off line. Once power is restored, the camera seems to work normally. I have not investigated this issue deeply because I have little need to run from the battery.
Can I be 500 yards away with my phone cam I got to work at peace and know everything about my camara
No, since Aug/2018 you cannot connect to your camera from remote locations
The app keeps telling me incorrect UID even when I scan it or enter manually. the phone says I'm connected to the clock wifi, but it doesn't show up in the app?
Go to the Google Play store and find other apps written by the same programmer. They are all virtually identical. So do a search for "Zhang Gang". In addition to iminicam, two other apps that work for me are MUcam and P2PLIveCam. Last year HDminicam stopped accepting my UID.
How do I get it off of military time??!!!?!
Use one of the other two date formats. The YYYYMMDD format gives military time. The other two formats show 12-hour time
The cameras wifi will not show up i tried everything dont know if im resetting it the right way can you help me out
Do not confuse "reset" with "reboot." You need to gently press the reset button with a pin for 5 seconds. This is not the same as sliding the power button off and on, which simply reboots the camera. Do not press the rest button too hard or you may dislodge it from its circuit board.
Great video I have done all the steps but I do not know how to view live stream my home when I am at the office? Can you explain?
From the app, click on "Live Video" at the bottom of the screen. Then click on the name of your camera. If you want to watch continuously from the office, you may prefer to use the PC app (IP Camera) so you can watch the video from your larger PC screen instead. Let me know if you need more details about that.
Am having the same problem , need help work fine at home but if I am miles away I can't log on to the camera. Any help please
@@igfishing13, Aside from the instructions I gave earlier, make sure that you went into "wifi config" (under "Advance Config" or "Device Settings") to connect your camera to your WiFi network.
@@igfishing13 ,I have often noticed that connecting to the camera fails from a commercial location with free wifi. Maybe they have some filters that prevent these types of connections? Connecting from someone's home wifi is more reliable.
I also suspect that if you persist in making the connection, the camera can go off-line, which requires you to re-boot the camera to bring it back online.
How come I do not trust you.
I just want to get rid of the blue light showing the time, it gets too bright when I go to sleep, yes I have the camera in my room, it works perfectly fine but I wish there was and option to turn off the blue light and have the camera work at the same time.
Some models allow you to turn off the clock display. From the top of the "Live Video" screen there is a ribbon of controls (such as brightness and contrast). One of the controls is shaped like a "T". If it is present, the display can be turned off by touching it.
Prix téléphone Olga pour malvoyant
How can i change the time? There were no physical buttons?
That's actually good news because when there are buttons you must set the time manually (usually). But when there are no buttons, the time is obtained automatically from the internet. You just need to set the camera to your time zone.
When you re-set, do you have to go through all of the steps to make the spy camera record?
You should only reset once so that you can connect your camera to your wifi network. Once you establish a connection, you do not need to reset again. If you do, you will have to reconfigure all the settings again including the password and the scheduling of when the camera records.
That said, a reboot is not a reset. So you can reboot as many times as you like without losing any of your settings.
you all prolly dont care at all but does any of you know a trick to log back into an Instagram account..?
I somehow forgot my password. I would appreciate any tricks you can offer me!
@Gage Jerome instablaster =)
@Lukas Ethan I really appreciate your reply. I got to the site through google and im trying it out atm.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@Lukas Ethan it did the trick and I actually got access to my account again. Im so happy:D
Thanks so much, you saved my ass !
How can I get rid of the time stamp?
Bought a clock cam but when I go into cam app to view camera the time goes off so much for a spy camera if you can help please do
what do you mean?
Is there a mac address for the camera? Community apartment wifi has two levels of signing in and I can't access the second layer from the app.
I do not have this camera, but I have a similar one that uses the same app. So maybe what I tell you will work for your camera. The only MAC address that I found (labeled WiFi MAC) is through the web version of IP Cam, but you will need to know the IP address of the camera which you can only obtain from the smart phone app.
Except for the last digit, the IP address should be the same as mine: 192.168.1.3. If not, just go sequentially through all the numbers. Hopefully yours is nearby and not near the 100 range.
Once you have the IP address, type it into the address bar of your browser (I use Firefox and Chrome).
When it prompts you for a user id and password, use "admin" for the user id and leave the password blank.
The next screen will ask you to select a browser. Choose the second one listed, "Non-IE Web Browsers"
On the next screen there is a pane of camera control icons. Click the gear wheel on the bottom (or at the top if it's there instead).
The next screen should show the WiFi MAC address. If it does not, select "System > About" from the left margin. If the text in the left margin is in Chinese, exit the screen and try again or try a different browser.
I can’t find I mini can can you send a link for apple .
The app has been removed from the Apple/Google stores because the camera is no longer supported. Get yourself a refund while you can if you recently bought yours
Hello everyone 😊
Question plss.
Can I see a live camera with mh mobile. When I was not at home or vication???
Not anymore since Aug/2019. Don't buy this camera. It is no longer supported
Do you need wifi at home ? Or just the phones wifi
I think you need home wifi, so that the camera can always be connected in case you leave home with your phone
I can't connect away from home, help come on guys
DID YOU FIND A FIX MINE IS THE SAME
How do you find the app???? i can't find it on the Apple site.
There are several apps that you can use. They are all written by the same programmer. They are all virtually identical. So do a search on "Zhang Gang." That will yield you apps such as HDminicam, iminicam, P2Plivecam, MUcam, and a few others. Some may not work with the camera id your camera has. I find the MUCam accepts all the ids I have provided it.
There is no button to adjust the alarm clock can you pls advise?
Are you sure this particular camera has an alarm clock? I think it only has a clock but no alarm (other than the motion detection alarm) to ring at a certain time,
I can’t find the app in apple store, and I try to many apps but nothing, how I can get my money back
It's been removed from both Apple and Google stores.. Nothing can be done for Apple, but you can still get it for Android
If you paid with Paypal or bought your camera on Amazon, eBay, or Ali Express, request a refund ASAP.
It looks like all these cameras have been discontinued from manufacture ever since the P2P servers were brought down last year.
Sellers are just getting rid of their existing inventory to unsuspecting buyers like yourself
I can't reconnect remotely anymore it keeps saying logging in... but it works if I turn on the WiFi on my phone.
Everybody is having this problem because the P2P servers that the app relies on are presumably no longer operational
we can use other app??
Dose it work with iPhones
It does work with iphone and ipad, but since the app has been removed from the Apple store (and Google store), there is nowhere else to install it from. Do not buy this camera
what does it mean when it says Max connect?
I have one camera that gives me the same message when I attempt to have more than 5 connections to it at the same time. My other cameras do not seem to have this limitation (or have a higher limit)
Como la configuro pero para verla sin estar conectado a la red de wifi, osea utilizando los datos de mi celular sin necesidad de estar en casa
Why did you refuse to show the face of the clock. I want to know how noticeable the camera is
It looks like a typical clock. I would not think anyone would give it a second glance were they to walk in the room.Only the time shows, in digital form of course.The numbers are blue. I see no other lights when it is connected. I just received mine today and literally just set it up an hour ago! So far pleased with the purchase. I will mention that the battery life is only 30-40 mins., so you pretty much have to leave it plugged in unless you want to just set it somewhere for that short period. I will say one thing, I took a photo of the clock close-up, and in the photo I can see 6 little faint green lights which I guess are the cameras. These cannot be seen with the naked eye however. Even so I don't think anyone would particularly notice this in a photo unless they were specifically looking for it and knew what it was. Also don't think it would show up in a photo taken from a regular distance. Hope this helps.
You no if you wont to check the carma on your phone do you need a WiFi link were you are. Or does it not matter because it uses your own WiFi were ever you got the camra set up
@@amagenarypowers9313, your smart phone should be able to connect to the camera from anywhere around the world, provided that your smart phone has an internet connection and your camera is at home connected to your home WiFi
Dacă sunt germania si camera in romania merge oare?
What is the default user / password for the camera if I want to grab the ffmpeg stream on 3rd party software like iSpy? admin/admin ???
Each camera has a unique user id (UID) and a default password of 8888. The PC app and the web browser interface has its own login credentials. The user id is admin and the password is left empty
how to set the time?
If there are no buttons on the top, set the correct timezone from the app. The time will be set automatically from the internet.
Hi can u guide me how to set it up? I already connected it to my phone, but now its always offline after i connect it to our home wifi
I also tried to reset but nothing happens.
Zell Javier how did you get it to your WiFi it doesn’t show up
This thing is trash
How can I connect 2 cameras to my phone? Can you help me
I do not think there is a limit as to how many cameras you can connect to. In fact the phone app provides a grid of 4 quadrants on your screen where you can simultaneously watch the live video of up to 4 cameras. I have 5 cameras connected without any problem. Of course, you can use the entire screen to watch the live video of any single camera. Moreover, the PC app can divide the screen in various formats, the largest being 36 quadrants for 36 cameras!
To connect a second camera to your phone, simply add it the exact same way you added the first camera. You may want to give each camera a name on the app so that you know which camera you are looking at.
@@dkyrtata6688 thank you for the help
Hi.....I was trying to reconnect my camera to my phone the same way I did before.but don't let me keep saying camera reboot I restarted over and don't connect
@@alexarteaga8245, you cannot connect to your camera until the reboot process completes. If it does not complete, reboot the camera using the on/off switch in the rear. Exit the app (better still, reboot your phone), so that the app does not mistakenly think that the camera is rebooting.
If you still have problem, try resetting the camera instead, by pushing the button near the on/off switch with a pin. Exit the app (or reboot your phone) and the go into the app again. Since you did a camera "reset," you will have to configure the camera again exactly as you did when you bought it out of the box.
@@dkyrtata6688 I'm gonna try that. Thanks again
The camera dosent connect with my phone. What Can I do? Please help me
You need to provide more information.
First, connect your phone to the camera's wifi signal. If the camera's wifi signal is not listed on the phone's screen, reset the camera by gently pressing the reset button with a pin for 5 seconds. Do not press too hard or you may dislodge the button from its circuit board.
Once you are connected, go into the app's "Advanced Config" (or "Device Settings" on Apple) and select "WIFI Config" from the menu list. Then from the pull down menu, connect the camera to your home wifi using your home wifi password.
Now you can disconnect your phone from the camera's wifi signal and reconnect it back to your home wifi signal.
Since both your camera and phone are now connected to your home wifi, they should both be able to communicate with one another, even after you leave your home.
Try to reset it, as he shows u.
@@nightflash1352: Yes, he is resetting the camera correctly -- the same as I explained. After you reset, the camera should appear on list of WIFI networks on you smart phone.
Thanks a lot😀
Its doesnt fonctionne with Android
Yes it should work with Android
My camera doesn't even turn all
Team please help
Can you be more specific? What happens when you plug the camera into a power outlet and turn on the power switch from the back?
Not advice anyone to this plsssssssssss. Cheating
So, can anyone access the camera's non protected WiFi? Does not make it secure...
i changed the pass word on mine & also renamed it
Teo P wen I go into my WiFi there no conection like at the beginning of your video
Teo P it keeps saying rebooting wot does that mean.
Teo P you see wen you open your app iminicam I get the same blue background but there no little box on mine were you press on it to bring up the live camera
The english so bad lol..
You should have done the night mode in dark
Why when I leave the app it stops recording?
Maybe you have the recording condition set to "On alarm" instead of "All day"
Can you explain for me in details if you don’t mind please
Click on "Live Video" at the bottom of your screen.
Press on the the name of your camera for 2 seconds until a menu pops up
select the 4th item of the menu, "Advance Config" (or "Device Options" on Apple)
Select :"SDCard Record Config" from the next menu
Select "All Day" from the pull-down menu of the next screen. (Are you sure you want this option? I think it is better to record whenever the camera detects motion rather than all day)
Click on "OK" to save your selection.
I wish if you Can you send me a video please because i confusing me I’ll be thankful 💗
@@_waasshi Sorry, I do not have the means to create a video.
If I am in the area in the camera is in the house that I still can look at it and see what happen in my house .?
You can view the live video of your house from anywhere around the world as long as both the camera and your smart phone have a WiFi or internet connection.
how to reset password
To reset the password back to 8888, gently push the rest button with a pin for 5 seconds. Do not push too hard or you may dislodge the button from its circuit board
@@dkyrtata6688 hi can I connect 2 cameras on my phone.?
@@alexarteaga8245, I have 5 cameras connected. I don't think there is any limit of how many connections you can have, but you can only view up to 4 at the same time. Normally however, you would probably watch the live video of one camera at a time since your phone screen is rather small to watch more than one simultaneously.
No password. Don't you think that's a problem? Can you set a password somehow?
The defaut password is 8888. If you forgot your password, you must reset it by resetting the camera by gently pressing the reset button with a pin for 5 seconds. Do not press too hard or you may dislodge the button from its circuit board.
@@dkyrtata6688 Thanks
This camera is terrible!!! It's the 2nd camera they sent and both were bad! Under setting it doesn't have the option to setup the camera!! It shows Modify Delete or Reconnect only!! No Advanced Config!! I don't want a 3rd camera I want my money back!!!!
The "Advance Config" (or "Device Settings" on Apple) is only listed when the camera is connected to the wifi network. If it is no connected, your smart phone has no way to communicate with the camera to configure it. Here is how to connect to it:
First, connect your phone to the camera's wifi signal. If the camera's wifi signal is not listed on the phone's screen, reset the camera by gently pressing the reset button with a pin for 5 seconds. Do not press too hard or you may dislodge the button from its circuit board.
Once you are connected, go into the app's "Advanced Config" (or "Device Settings" on Apple) and select "WIFI Config" from the menu list. Then from the pull down menu, connect the camera to your home wifi using your home wifi password.
Now you can disconnect your phone from the camera's wifi signal and reconnect it back to your home wifi signal. Since both your camera and phone are now connected to your home wifi, they should both be able to communicate with one another, even after you leave your home.
Dkyrtata Hello, To find the program on the Apple Store and not on the Blair Market, please send the download link. Thank you
The app doesnt even exist!!!!
The camera is unsupported since August/2019. So the app has been removed from the Google/Apple stores. There is nowhere else to get it for Apple, but you can still get it from here for Android: apkfab.com/developer/gang.zhang
Since the app is unsupported, there is no P2P server to connect to anymore. That means you cannot view your camera from outside your wifi area.
Get a refund if you recently purchased your camera!
@@dkyrtata6688 no my dad bought it like 2 years ago and as you can imagine we already trew it away since we discovered that it is discontinued
This shit is garbage didn’t even come with a battery
I need to place the camera on note4' how I do that?
I assume you mean that you want to view the video of the camera on your Samsung Note 4 smart phone. To do this download and install the iMiniCam app from the Google Play store: goo.gl/znCUNp
Yu Engli Suks
Thank you