Sonoff Presence Sensor: step up from the old motion sensor with much more accurate radar technology
Вставка
- Опубліковано 21 лип 2024
- Brand new product from Sonoff is this Zigbee presence sensor. Instead of the less realiable PIR sensor, it uses a radar presence sensor combined with a light sensor. This provides more accurate presence detection, even if there is very small movement.
Buy yours today: itead.cc/product/sonoff-zigbe...
Documentation: support.sonoff.tech/snzb-06p-...
If you like what I do here, you can support me with UA-cam Thanks, or Patreon:
/ csongorvarga
Chapters:
0:00 Intro
0:43 What is a radar sensor
2:51 Overview
6:40 Using it in the app
8:18 Sensor settings
9:34 Experience so far
10:34 Presence automation
11:01 Light sensor
12:09 Continue with the scene
14:24 Outro - Наука та технологія
Hi thank for this, I got one (SNZB-06P) as well recently and the range on this one is less that the previous version (SNZB-03)
This one only starts seeing me around 3 or 4 meters away. Where the other easely spots motion 6 or 7 meters away. The other slight annoyance is that SNZB-06P needs a power source.
Very good, thank you your thoughtful analysis.
Great, thank you! ❤
Hello, do you know if it can be paired with ikea dirigera and exposed to homekit?
Interesting person sensor. I have built a few radar sensors and the battery life is always an issue. Will be interesting to see the price on this.
Yeah, especially compared to the old sensor which is a battery hog.
@@csongorvargawill be smartthings compatible? 😊
@@VasilievFlorin most probably yes, smarthings have similar sensors as well.
14.90
My device shows in ewelink app as a motion sensor why is that no option for light sensor no sensitivity settings. I'm using old sonoff zigbee hub not the pro version
Could you please check with old version of sonoff zigbee bridge.
I bought a SNZB-06, that I try to use with a Sonoff ZigBee Bridge. In the application I do not have the option "sensitivity" and the "detection duration". Does anyone have such a problem like me?
I have the same problem
I wonder if thats the difference between the Standard Sonoff ZigBee Bridge, vs. Pro, or IHost?
I only have the Standard Sonoff ZigBee Bridge.
@@dustinleibach4835 Could you solve the problem?
home assistant compatible ?
I will test it in Zigbee2MQTT once I finish more detailed test.
How do these companies expect to be taken seriously with a bodge like the cable coming out of the side? Why not out of the back in to the base so it can be routed in a wall out of sight.
It is not ideal, but having a connection on the back would only allow installation in new homes. Lot of people live in rentals where no distructive install is the only way.
@@csongorvarga, it's only power, it easy to add second connector for few cents more. I think, renting people are not main users of such hardware due to reasons you mention.
@@czarekcz1097 Yes, as far as I know it is only for power.
Yes, they could have found a lot better cables, thin, or super thin wire, angle ends...
Is there a power block included?
@@williamterry3177 No, there is no power supply included.
Is working with Tuya?
I am sorry, but I don't remember if I tried it. Probably did not.
Yes it's working well with tuya zigbee hub + tuya app. In fact it detects a person way more faster than sonoff zigbee hub + ewelink app
No map of room is available??? Just present detected...
Yes, just presence or no presence. This does not give you distance or direction.
I am the only one having serious issues with sonoff ZigBee sensors ? I have a zigbee hub pro and a few SNZB-03 and SNZB-02,... 6 ZigBee devices in total. If I put new batteries and reconnect everything it works for max a week and after that the sensor disconnect and never connect back on theirs own, only if i delete and repair them. It's not a batterie issue, the sensor still reacts to motion for ex, because the LED inside the sensor is still blinking. The distance cannot be an issue because they are not far from each other + it works just fine for the first few days. I got replacements from Sonoff, I put al the devices in a drawer with the hub, same result, they disconnect after a few days. WHY "???????
Very strange. Nowadays I either use the iHost or the NS Panel Pro as a zigbee hub and I am not having any issue. Having said that I have a different zigbee network running 24/7, but the NSPanel Pro is on for a few days now with the old and new motion sensors and old and new temp sensors and everything is OK. May the problem is the zigbee hub.
I have quite a few 03's and no issues (I can't remeber the last time I replaced batteries); however they are connected via the Sonoff 3.0 dongle and ZHA .The Sonoff hub is flashed as router and does its job that way. Likely the issues is with the hub.
same issues with sonoff wifi devices. I restart every second night my router automatically.
@IvanAgh it must be your router. I have 4 wi-fi switches and about 8 other sonof devices(smart plugs, switches) integrated in Home Assistant via the local integration (not cloud) and they worked flawlessly for 2 years. I would also ensure you run a dedicated 2.4 GHZ only wifi network for your IoT devices.
@@netblue I run 2.4 GHz, other are not supported. I run via cloud. Have two separate users, because one cannot be used in case I connect from computer and mobile phone, or home assistant. I have had use them at two locations (with different routers), and the same behaviour. Nevermind I can exist with autorestart of router.
This is needed. Still no change with the reaction gamble of PIR Sensor!
Yes, and I already notice that it works much better. Video coming soon.
4 Meters to the front detection
@@BenIsmail Really, 4 meters is the limit?
@@csongorvarga hopefully not. It says 4meter. PIR is 6meters