Great job on the fuse boxes and making the mounts excitement of getting the seat in and setting behind the wheel looking forward for the next video definitely thumbs up 👍👍👍
Awesome video mate, can only imagine how rewarding it must have felt when you sat in it for the first time, and that everything seemed to work as it should including the dash. This car is going to be insane!
yes a little bit, but I already had come along way by the time it arrived, when it will be really useful is the next stage of the wiring, ie getting lights etc all rigged up and of course if there are any issues once all is plugged in, which wont happen until the engine and box are in
Thanks Liam. Its not that I Choose this fuse box, my plan all along was to re-use as much from the Mustang GT Donor car as possible , so I therefore used the full wiring loom, fuse box and computers from that Mustang GT Donor so as to keep a complete system together, but as this fuse box was in the engine bay of the mustang and I wanted clean engine bay, I relocated it to the rear of the Falcon
Tom, this Falcon will be like no other. A credit to your engineering skills and most importantly your dedication and patience on this incredible built and foresight. Cheers for the journey
personally id have tried to locate the ecu inside the car. i appreciate you are going to make an inner guard, but in that location, i would be worried that it is still susceptible to water, be it spray from the wheels, rain blowing in past the lights/bumpers etc..
yeah thats true mate, Im probably trying to take the easy way out . Truth is it is very unlikely this car will ever see rain, and these units are fairly well sealed
Regarding the earth strap from the battery, I would go for at least a nut welded to the body rather than the fat self tapper! You need a few earth points around the body as well. Like everyone else says, it will be great to see it finished.
cheers mate, Im using all the original mustang earthing points and in the wiring loom, so wont need any extra, as there is already alot , but your point of the bolt and nut idea is noted and I may convert that one near the battery
Hi Tom I KNOW that you spent a long time on fitting all those Anderson plugs but its very bulky would using a couple of 80 pin AEM series 5 infinity connectors be a neater finish Or now that you lengthened the cables unpicking (unpinning) the fuse box and doing a direct connection? Enjoy that sitting on the seat behind the steering wheel because that is what this project is all about.
All coming together nicely mate. 👌
Cheers mate
Awesome seeing the dash come too life
At least I know I got some wires in the right place haha cheers Graham
Can't wait to see the final product..... So coool tho.... Falcon fan from PNG 🇵🇬
Cheers Mate !
Very nice love watching it come together cheers have a good one👍🍻
Thank you mate Cheers!
Looking great! Don’t forget to add the trickle charger (and maybe an outside charge point) amongst all those electrical components.
Great point! thanks mate
Enjoying every minute of it - great videos, great workmanship, well done. Looking forward to the next one.
Thanks alot 👍
Awesome stuff. Excitement is building......
Sure is cheers Darrin!
Great job on the fuse boxes and making the mounts excitement of getting the seat in and setting behind the wheel looking forward for the next video definitely thumbs up 👍👍👍
Thanks mate !
Pretty cool seeing you sit behind that wheel for the first time. I was grinning for you😅
yeah mate, felt great !
lovin the progress great sparky work, ol classic with modern comfort i wouldnt get out lol
Thanks mate !
Awesome video mate, can only imagine how rewarding it must have felt when you sat in it for the first time, and that everything seemed to work as it should including the dash. This car is going to be insane!
Cheers mate, yeah felt real good for sure
@@phatridesgarage3760 Can’t wait for the next video mate 👍🏼
Awesome work Tom, this is really starting to get exciting now 😊👍
Thanks Kim , It really is getting interesting!
You done a great job fits like factory
cheers mate
@@phatridesgarage3760 did the wiring manual help
yes a little bit, but I already had come along way by the time it arrived, when it will be really useful is the next stage of the wiring, ie getting lights etc all rigged up and of course if there are any issues once all is plugged in, which wont happen until the engine and box are in
Another great effort. It’s coming along. Can’t wait to drive it. Cheers from Thailand
thanks mate
Nice work. Im curious as to why you chose a large fuse/relay box instead of a pdm (as im trying to decide how to wire my current build)?
Thanks Liam. Its not that I Choose this fuse box, my plan all along was to re-use as much from the Mustang GT Donor car as possible , so I therefore used the full wiring loom, fuse box and computers from that Mustang GT Donor so as to keep a complete system together, but as this fuse box was in the engine bay of the mustang and I wanted clean engine bay, I relocated it to the rear of the Falcon
Love the engineering you’re putting into that build, going to be a very cool ride! Thanks for the video!
Thanks very much mate !
Really nice work mate, this car is going to be stunning.
Hope so!
Tom, this Falcon will be like no other. A credit to your engineering skills and most importantly your dedication and patience on this incredible built and foresight.
Cheers for the journey
Thanks for the great feedback Richard ! appriecate that
Looking awesome, cant wait for the drive time 😂 coming along nicely Tom Cheers 🍻🇦🇺🤝🇳🇿👍😎
Thanks KC ! 👍
More excellent work Tom. Love your videos mate.
Many thanks Matt!
personally id have tried to locate the ecu inside the car. i appreciate you are going to make an inner guard, but in that location, i would be worried that it is still susceptible to water, be it spray from the wheels, rain blowing in past the lights/bumpers etc..
yeah thats true mate, Im probably trying to take the easy way out . Truth is it is very unlikely this car will ever see rain, and these units are fairly well sealed
All your work Tom is coming into fruition looking forward to seeing the mighty BOSS installed Tom
From memory it was going to be a cyotie not a boss but could be wrong
haha yeah true
Thanks mate
Regarding the earth strap from the battery, I would go for at least a nut welded to the body rather than the fat self tapper! You need a few earth points around the body as well.
Like everyone else says, it will be great to see it finished.
cheers mate, Im using all the original mustang earthing points and in the wiring loom, so wont need any extra, as there is already alot , but your point of the bolt and nut idea is noted and I may convert that one near the battery
Looking awesome Tom 👍
Thank you! Cheers!
Thats some nice work man.
Thanks Steve!
Hi Tom I KNOW that you spent a long time on fitting all those Anderson plugs but its very bulky would using a couple of 80 pin AEM series 5 infinity connectors be a neater finish Or now that you lengthened the cables unpicking (unpinning) the fuse box and doing a direct connection? Enjoy that sitting on the seat behind the steering wheel because that is what this project is all about.
Thanks mate !
More great progress mate. I'd have laughed if the dash warning said "No engine detected" instead.
Hey ya Tom, been waiting for the next installment. luv ya work.
Thanks mate, not much in this one, but thought i better put something out
Well you won't have to worry about kicking the fuses with your accelerator foot now.......
Ahh, well there is still a 2nd fuse panel on the drivers kickpanel lol
Assembly Looking the Good Tom
Thanks mate
Nice one Tom the wiring is looking and what a nightmare it isi bet you were so relieved when it lit up
What is happening with the chev
Thanks mate, still have a ways to go yet, the rest of the wiring wont be connected till the engine and box are in
Awesome build so far. Have you decided on a colour yet.
Thanks alot mate , not sure yet On colors
I can’t wait to see this finished
cheers mate
Looking good m8 Note the skylights are not doing you any favours during the intro & outro. Light streams showing
My bad
I remember putting my seats in
yeah, these are heavy, I took the easy way out haha
Love it mate
Cheers mate
👍🏻👏🍺
Music is annoying
Thanks Tom, I now know what’s under my drivers seat, not that I ever intend to get at anything under there!🤣😂😅🇦🇺🦘
Haha no worries mate