I have a Xeon E5 2670 and it's WONDERFUL, and if you can snag one of these systems for like $150 or less, then it's a great price...AND it has a decent power supply?? PLUS, you can stream using the CPU encoder which is much higher quality than AMD's VCE. GOOD FIND!
How to get into PC gaming for any budget. Step 1: Watch Tech YES City Step 2: Take information and apply it to your shopping. Step 3: Build PC with Tech YES Knowledge. Step 4: Laugh all the way to the bank with your SAVINGS! Step 5: START GAMING!
Saved this video because my laptop had the activation watermark on it. A few months ago I tried to purchase a license and the link did not work. Today I accidently clicked on this video in my saved file and tried the link again. This time it worked and even got the discount using the code. Made the purchase and retrieved the key but it did not work. Chatted with customer service and Marco was able to send me another code which I tried and that one worked. Everything is great again. Thanks!
"It's cheaper to get into PC gaming than it is to get into console gaming if you're willing to buy some used parts." Brian, there is a bit of a problem with this argument; You can also buy a used console. I get what you're saying though, PC gaming is more approachable than it seems to be on the surface.
In my country is way cheaper to build a pc plus its the games part, that on consoles you have to buy them, on pc you can download pirated games. A risk you have to take when youre poor
And games are cheaper on pc and a pc is upgradable so you don’t have to buy a new one every 2 years and a pc is fixable you don’t have to send it to someone you don’t know and pay them a lot to fix it you just buy the replacement part and pop it in
@@JimTheKid and let's not forget the quality of most games are far superior than console. As owner of both I should just sell my consoles because the experience is horrible compared to PC.
I actually managed to receive a retired one from work, and here are some pointers you get your hand on one: > The handle Brian smashed with a hammer can actually be drilled out without damage to the panel, it's only spot welded. > As long as you update the BIOS (you can do so with a utility called Dell Command Update), a 2687 should be a nice drop in replacement. > I would not push anything less power efficient than a GTX 1080. I grabbed a R9 Fury for 90 USD and no dual 6 pin to 8 pin adapters would run the card stable. I would only recommend cards that require 2 6 pins, at most.
My buddy was going to buy a gaming laptop for £800. I asked him how he felt about a desktop instead. He said great. One optiplex and a gtx 1650 later (his choice) he was feeling good, and about £500 better off. He is also getting familiar with system building. Thanks for the info!
I did a build with a Xeon e5-2667v2. Fantastic clockspeeds for an 8 core from that day and age. A total beast. All the HP z400 and z420 builds I've built has had people talking about these Dells as well, but the Dell variants around these parts were BTX (at least the x58 ones) and not case swappable like the z400s. Really dig this, thanks for the vid!
For things like War thunder you want a giant screen, spotting enemies is a LOT easier with more real estate as enemy tanks and planes can often be just a few pixles big
I bought a Dell Precision T1600 end of 2019 and put in an RX 570 8GB, a USB 3 expansion card and a new PSU. The T1600 uses the E3-1200 series Xeons. Another cool thing with the T1600 is it uses a standard ATX PSU so no proprietary power supply.
I upgraded a similar Dell system. I ended up drilling out the rivets on the brace in order to get the side panel on. Your way looked a little bit quicker!
I was able to remove that internal handle by jamming a screwdriver under it and popping the spot welds off. It took a bit of time but it looks a lot cleaner imo
I have an 18inch CRT. 1024 X 768. 😀 The quality and brightness and clarity is amazing. Plus I can run GTA V at max settings at 85fps locked all day long. CRT for the people.
Actually blows me away how relevant the RX480 is still with current games. It’s no 2080ti but for how cheap you can obtain them you can’t go wrong with that level of performance.
Got mine (T5600) in a company decommissioning...for its $0 (its book value) in late 2018. Dual E5-2667, 32GB R-EEC 1600 DDR3, and 825W PS. I thru in a GTX 970 OC'd (for $120 in early 2019) and recently upgraded to dual E5-2689's (which together cost $160). 16C/32T beast. CB R15 score is 2200. With new SSD I invested a total of $350 for this rig. ..oh...and I also recycled and old Dolby 7.1 audio card from my dead Dell XPS 420. Also, a recent office-lab cleaning and a junked T5600 with bad motherboard was tossed into the outside bin. I managed to retrieve the CPU coolers & PS in case of future failures. They are expensive to replace, per eBay prices. You can customize these rigs...there is a UA-cam site for this: Green PC Gamers; where changing out OEM air cooling for third party coolers is explained, etc. I also blinged this thing a bit. Took some Vinyl Carbon adhesive roll that I bought on eBay, the stuff used for car exteriors, and cut it to fit the side panel...just to spruce it up a bit for home office use. A nice black, red or other carbon 3D color makes this looks less business and more fun, though it is a beast for multi tasking and rendering. The downside...BIOS is locked...certainly on the dual T5600. Which means the locked E5's with large core counts are preferred. I went with the E5-2689, which is an OEM special that is well priced and a solid performer. All core clock in turbo is at just under 3.2GHz. Don't ask me about power consumption...I suppose this thing draws some serious wattage. No issue for me. Hey Brian..if you want a couple of E5-2667's I can post them to your address, snail mail.
I have 4 of these systems that I built up as gaming rigs, you just have to click activate a few times, the COA for Windows 7 Pro will register for Windows 10 Pro
Correct . In my case the Windows License Keys were stored on the MB in form of Digital License, so as soon as I connected to internet and tried activating it got activated.
If the GPU is artefacting then based on my experience, that PSU isn't enough to drive the system. The CPU chugs watts like it's at a hot dog eating competition and Polaris GPUs are extremely inefficient and power hungry despite their cheap price. Add to that the fans on the beefy cooler, 1.5V ram sticks, HDD and SSD as well as anything else and you are boarderline running out of PSU capacity. Even on PCPartpicker it will estimate your system chewing around 410W while you are powering the system with a 425W PSU. The GPU didn't artefact on your test rig because it had sufficient power. Either get a 75W - 120W GPU, downgrade the CPU to something less demanding, downclock the CPU or upgrade the PSU to fix. I used to have a Sandy bridge i5 with a GTX 1050 Ti running on a 265W PSU, let's just say I had to deal with shutdowns, freezes and blue screens until I upgraded my PSU
maybe superbuy is a good option for you (and others buying more than 1 item). You can buy RX 580 (4g) for €45-50 the downside is that the shipping cost is expensive if only buy one. But lets say you buy 5 of them you can probably get them under €300 with shipping.
I've switched from a 24" 60Hz FHD monitor to a 29" 75Hz 2560x1080 UltraWide last year and I like it a lot. Reason is that I do not play any competitive games and for single player games like Witcher/Skyrim,etc this looks great and its even more 'Immersive' at least for me. Sure some games still have issues with this screen aspect ratio and I have to look for a fix online but that I can deal with. On a sidenote,this ~160 USD setup would cost something like 270-300 USD where I live 'middle EU'.:P
You should look at his other x58 Xeon vids, you could get a Xeon, an overclockable x58 Motherboard, and a decent cooler, you'd be able to overclock to at least 4.0 GHz, the xeons are really cheap too
There's also the HP Z2xx CMT workstations that can be made into pretty good gaming PCs with prices (at least in the UK) starting at around £50 (without shipping) on ebay for a unit that you have to add a processor, RAM, storage and a graphics card to. I however, managed to snag a Z210 CMT with an i5 2400 and 4GB RAM for around £60 with the only extra costs being £30 for 16GB RAM and around £50 for a 250GB SSD (there's also a USB 3 card I added, but that has a few issues so it's likely to be taken out once I have a replacement) as I already had a 1050Ti and two hard drives that I was going to move to it from another PC (I didn't have to pay for a windows 10 license as the system still had its windows 7 pro license key attached which was good for activation windows 10 pro).
I also made some very good deals. Just bought 15 untested Xeon 2620v2 with one 2603v2 for 19€. 15 of the 16 CPUs actually worked. Then I got a 2630v2 for 12€ and a new LGA 2011 Board for 65€. I paired that with 16 Gigs of ECC REG DDR3 for 20€ and a GTX 780ti for 80€. For this system I spend 40€ for a PCIe SSD. So basically for 220€. I had a power supply laying around and also 2 TB of HDD storage, just missing a case
i used a rx480 and fx 8350 for few yrs and still runs most games above 100fps, i switched and i now use that fx PC as my 2nd storage/streaming pc. they still have enough power to play most games just fine, its not a 2080ti, but it will give you a very playable experiecne.
In terms of monitor size, i would say it depends of what distance you are of the monitor, if you have a bigger table, a 27 inch is better if you look it from further away vs a 24 inch, but when i have went to a friends house to play pc games with him and he gives me almost a coffe table to play, then a 22 inch is obviously much better, lol. As for now since i use my pc for work, i got an ultrawide and never looked back, best thing ever in that regard.
I totally agree with this solution. I went a slightly more 'luxury' route. My HP Z420 workstation has the same Xeon E5-1650V3 processor but I re-used my Radeon RX580 GPU. The Z420 has a stock 600W PSU and with the use of a dual 6 into 8 power adapter it carries the load fine. I bought a Barracuda 500GB SSD and a 2TB HDU also Barracuda. I chose the HDU specifically because it is 7200RPM with a 256MB on-board cache. I spent approximately $150 more than you did but I use my workstation for everything. My type of gaming is RPG of one form or another and this system has more than enough grunt to run something like Elite Dangerous or No Man's Sky. Actually a really good performance test is Cities Skyline. On a large simulation it really loads up the GPU and the CPU. I also use my Z420 for Davinci Resolve, Reaper, Inkscape, Fusion 360 and Design Spark Mechanical. That's the great thing about using an old workstation, it's an enterprise grade solution that mere mortals can afford. My advice is buy the most loaded version that works for your budget. Don't think about upgrading the CPU or the RAM because it can quickly blow your budget and then these old machines don't make sense. Don't consider buying anything with less than 16GB of memory. Mine came with 32GB but I knew I was going to need the extra space for some of the non-gaming applications I use. A lot of vendors will strip out the CPU and memory to sell separate. It's fairly easy to upgrade the Z420 PSU to a stock ATX if you really need to run that 1080TI. In a couple of years or so I'll upgrade to either a Z440 or a Z840 (mmm, Dual Xeons). BTW the aggro with hammer wasn't strictly necessary, It would have been a lot quicker and cleaner with a Dremel tool.
Hey Bryan. Tech Yes Price Performance Budget Gaming! Woohoo. Bargain! 24" monitors are great for gaming. 22" are also good. . Cheers, Mon from Brisbane.
Used to work in a pc shop that sold old workstations refurbished with gaming graphics cards as gaming machines. The z420 are really good and can power 1080ti's
In case of T3500 you can just Replace the Dell Propriety PSU with an aftermarket one, without any issue. BUT not in T3600. Tat's why T3500 is my favorite.
I have dual AIO water cooling radiator in front (you will loose dvd bay) it pushes the air through the front mesh. Rear fan is flipped as intake fan. You could bolt a 90 mm fan on that mesh in the back, although there are no fan holes its very doable still.
Can even go bigger: the T5810 and lineup siblings have a Haswell/Broadwell capable C612 chipset and support 768GB of DDR4. If you’re nuts you can then run the 22C/44T v4 Xeons like the 2699v4. Only downside is the Dell OE board doesn’t support overclocking or engineering sample chips.
I remember watching a video of him using break cleaner without acetone And I believe he also uses wd 40 I'd ask the yes man directly before applying such chems
Nice Video Bro ....... But You MISSED SOMETHING ...... Having been Doing Dell Mods for some time ...... here are some Tips 1) Go to tech Power Up Site and Download ThrottleStop Software. You can OVERCLOCK (in Windows) this system via ThrottleStop upto at least 4.1 GHz on all 6 Cores on this LOCKED DELL SYSTEM. Surprised?? I have been doing it since last 2 years. 2) Using Dual Channel Memory Bandwith on a System that Supports Quad Channel is a waste considering that Registered ECC DDR3 RAM are available at throwaway prices. You will be amazed with the bump up in performance by OCing CPU to 4.1 GHz and Quad Channel Memory Combined. My personal favorite is though the Precision T3500 because you can replace its Dell Propriety PSU with an aftermarket PSU which you cannot do in T3600. Also the Case for T3500 is bigger which allows many Cooling Mods which I have done. BTW T3500 also supports 6C/12T Xeons.
Hey I had a dell precision T3500. It had a xeon w3530, upgraded it to a x5675 and it was good to go. The system had a 80+ silver rated PSU so I coupled it with a 1050ti (could have got a 570/580 but I got a great deal) added in some ram and I had a system for around $130 (US). I gave it to a friend who was getting into PC gaming and it fit perfectly for him.
Good Man. T3500 is Cool. Unlike T3600, in T3500 you can replace Dell PSU with an aftermarket PSU without any issue (in case if the need arises). Also with larger case lots of cooling mods are possible.
@@manojgupta3770 Yeah I thought about modding it but I wouldn't know where to start besides swapping cases since the default one is so unwieldy. I did consider switching the power supply when I was debating on a 580, but it worked out since the included PSU is decent with a (relatively) strong 12 volt line.
@@laynewoodruff7502 at least add a 90 mm fan to the CPU HS, a 60 mm fan on North bridge and in my case I even put on my Old Dead Laptop's HS on the Southbridge of T3500. T3500's NB and SB becomes very hot ater few hours of work. Check this out.
12 to 13 ways to BEAT your system lol. I've never seen a Tech Yes Beating a system into submission but it seems like that side panel worked like a charm afterwards. All kidding aside, thank you for the video and great information. 👍👍
I use dual 1080p 144hz G-Sync (compatible mode via Freesync) and wouldn't want anything bigger for anything TBH. First time with VA panels and I'm sold on that tech for now, too.
In cast of T3600 you cannot replace Dell Propriety PSU with an Aftermarket PSU. BUT in case of T3500 you can do it without any issues. That's why T3500 is my favorite. Its cheaper too and also support 6C/12T Xeons andcan be Overclocked via TS / XTU .
whenever I play on computer cafe's with 34'' monitors, I always resize my games to 1360x768 because it is easier for me who's used on playing on that kind of resolution, thumbs up for the vid! I hope I can find and buy a computer like this
Over here in Brazil used pc parts aren't cheap, this workstation is about 500US$ used for the quad-core version whiteout the GPU on our ebay equivalent
Problem I've had since returning to the UK from Oz is that the prices in the used market are appalling. The same machine from eBay or marketplace sells for around $200 just for the T3600 with lower specs. Shipping from abroad is out as well as the cost of postage jumps the price up to around a similar price point. I've had more luck flipping old Core 2 Duo/Quads with SSD's for people wanting a day to day machine but obviously a smaller profit per machine.
I like how Tech YES City is giving good tips thats logical in comparison to whats out on the market. This is the opposite of all the Companies creating builds and Selling them for 4/3 parts of the price This is smart. Thank you
Hey Bryan, talking about those video artifacts, hope this can help you. I noticed my MSI RX 580 Gaming X starts acting a little weird (but not nearly as much as your GPU) when temps are in high 70s. A custom fan curve solved the issue during hot summer days. I noticed this behaviour only during very hot days while gaming with a little overclock on both core (+60MHz) and memory (+240MHz) but still at stock voltage and stock fan curve, otherwise GPU always stays in the low 70s in my case with zero problems. Cheers!
I went from an old 32-inch flatscreen tv to a philips 247e4 (23.6 inch) Took me about 2-3 weeks to adjust to the smaller screen. I prefer the smaller screen when playing games like Rust and Halo 2 multiplayer. But in the future when i upgrade my gpu i'll also go back to a 32 with high refresh-rate.
I like when you show new gamers this type of price to performance buys and dont cause a mad dash for the good stuff causing further price hikes on the used market.
My only worry about this build is regarding the health of the hdd and how long it might last the future user. That drive says it was made in April 2010.
Wow. That is an incredible rig for the price. I've got my fancy rig at one house that I fully built myself, but at my other house, I have put together a budget system I’ve always considered nice. I’m getting ready to upgrade the CPU in it from an I3 2130 to an I5 2400 since the CPU bottlenecks me from time to time. I only have a GT 1030 though. If you count the tower alone, I have invested about $100 into it as my grandmother gave me the computer for free after the hard drive died in it and she bought another computer. It would be more if you count the mouse and keyboard and things like that. I have put a GT 1030 in it and am getting ready to do that CPU upgrade. I also hope to add some more RAM to the already existing 6 GB in the future. I have always considered that system nice, but this is kinda crazy. I’m still satisfied though as that system is honestly nearly as satisfying to use as my other one and the 900p 5:3 monitor I have from 2007 has no problems with only a GT 1030.
I sold working station with Xeon E3-1240 V3 CPU, it was a huge mistake. Gaming on this computer was the best. I will never do it again because the CPU temperature was about 58 Celsius, and it was the most silent machine I ever had. In pair with XFX HD 7770 GPU it was great in games I play (WOT, Civilization II and III, etc...). On Passmark this CPU has about 7100 points and it is fantastic base to build a gaming machine.
yeah but the problem is that those deals are almost impossible for the regular Joe, for example in my country a machine like this costs like 400 usd...
Would have dremeled that side panel down so it can stay shut. Also would have mounted a fan behind the CPU and in the front. Couldn't hurt anything and might solve the thermals.
Any chance you'll be doing a X99/E5-2678V3 setup review video? Seems like the prices are coming down for the CPUs themselves, and the Aliexpress X99 boards seem quite affordable now. Plus, the E5-2678V3 has both DDR3/4 memory controllers, which would make this an appealing alternative to X79/X58 platforms.
This particular model came with the 430w psu which will give an error in the bios if you've got a graphics card plugged into the add on pcie extension cable. Any of the power supplies for that model use the same daughter board tht will accept the same pcie extension cables. Be careful with which one you choose. Any of the higher wattage power supplies won't have that issue
I think 1440p is the sweet spot if you have the right card. With that being said my favorite used/discounted price combo when I have to build systems for people on a budget lately is a new B450 mobo, 1st or 2nd gen ryzen as they can be had for cheap even new, and a used 1070 cause it's just the sweet spot for a 5-600 dollar gaming rig.
I got a MSI RX580 8GB and 600 watt EVGA 80+ PSU and 2x4GB 2400 DDR4 RAM for $110, then I picked up a m.2 248GB SSD off ebay for $30 and a m.2 to SATA adapter so I can use it with older PC's if I go that route. Still need a case, motherboard and processor though, so this might be a great option for me. Did have everything plugged into an HP Pavilion Slimeline s5580t with an i5 650 @ 3.2ghz but the motherboard died on me.
Sure gave that side panel some severe Tech Yes Loving.
Yes Tech Yes Loving struck me like a Hammer this time😁
Tech YES 'Tough' loving...
Tech Yes Tough Love
Ah, good old percussive maintenance! Works every time.
It was tough love.
I have a Xeon E5 2670 and it's WONDERFUL, and if you can snag one of these systems for like $150 or less, then it's a great price...AND it has a decent power supply?? PLUS, you can stream using the CPU encoder which is much higher quality than AMD's VCE. GOOD FIND!
love your channel
Is intel xeon processor x5680 a good alternative?
I love ur channel
I love ur channel
Do you think you can switch the case?
How to get into PC gaming for any budget.
Step 1: Watch Tech YES City
Step 2: Take information and apply it to your shopping.
Step 3: Build PC with Tech YES Knowledge.
Step 4: Laugh all the way to the bank with your SAVINGS!
Step 5: START GAMING!
tech yes lovin?for 2nd hand parts'😉
Tyl for gaming is unbeatable
Step 6: you are living in Ukraine, for that price you get socket 775 heater, definitely gaming edition.
That's a win win chicken dinner
YES
Saved this video because my laptop had the activation watermark on it. A few months ago I tried to purchase a license and the link did not work. Today I accidently clicked on this video in my saved file and tried the link again. This time it worked and even got the discount using the code. Made the purchase and retrieved the key but it did not work. Chatted with customer service and Marco was able to send me another code which I tried and that one worked.
Everything is great again. Thanks!
That Fortnite Graphics glitch is a bug in the game since the last patch update everyone has it so don't worry about the GPU having some type of issue.
@@AllanAdamson lots of people then. He doesn't mean literally everyone
Isaac found the fortnite fanboy
So this system even got Tech Yes Beating as well..
"It's cheaper to get into PC gaming than it is to get into console gaming if you're willing to buy some used parts."
Brian, there is a bit of a problem with this argument; You can also buy a used console. I get what you're saying though, PC gaming is more approachable than it seems to be on the surface.
Yearly subscription consoles require quickly covers this is a matter of a couple years
In my country is way cheaper to build a pc plus its the games part, that on consoles you have to buy them, on pc you can download pirated games. A risk you have to take when youre poor
And games are cheaper on pc and a pc is upgradable so you don’t have to buy a new one every 2 years and a pc is fixable you don’t have to send it to someone you don’t know and pay them a lot to fix it you just buy the replacement part and pop it in
@@JimTheKid and let's not forget the quality of most games are far superior than console. As owner of both I should just sell my consoles because the experience is horrible compared to PC.
but can you code and browse stuff easily on console?
X79/C602 goodness! I went the Lenovo route, but with the E5-2689 and RX580. Never been happier with a system.
I actually managed to receive a retired one from work, and here are some pointers you get your hand on one:
> The handle Brian smashed with a hammer can actually be drilled out without damage to the panel, it's only spot welded.
> As long as you update the BIOS (you can do so with a utility called Dell Command Update), a 2687 should be a nice drop in replacement.
> I would not push anything less power efficient than a GTX 1080. I grabbed a R9 Fury for 90 USD and no dual 6 pin to 8 pin adapters would run the card stable. I would only recommend cards that require 2 6 pins, at most.
The Tech YES value is off the carts!!
You could probably also drop in a cheap rear case fan to drop the temps a fair bit too
mate iv been waiting for Ur cheap build
Thanks mate
Those dell's are cool boxes for when you need a linux box on the cheap as well. Rock solid hardware. Cool project you made out of it.
These Workstations were made for 24 X 7 use. Are very ROBUST.
This build, how it's just super easy and cheap... console gamers should get on this ASAP.
One problem, i have no idea how to build a pc or what parts do certain things
Raiga same
you still think that with next gen consoles being comparable to high end gaming pc?
Great build!
I just finished a $250 gaming rig with an RX 470 and i5-2400
I did 570 and i5 2320 for 100$
Bryan! I offer you a pack of peanuts for that Quadro GPU.
Done I will collect at computex.
@@techyescity Sweeeeeet.....
@@MarcoGPUtuber what a negotioator
What kind of peanuts? That matters. Pecan, pistachio, Walnut, salted, unsalted, toffee, chocolate dipped?
@@ichiyamamoto785 Only the best! The Taiwanese Black Peanut!
My buddy was going to buy a gaming laptop for £800. I asked him how he felt about a desktop instead. He said great. One optiplex and a gtx 1650 later (his choice) he was feeling good, and about £500 better off. He is also getting familiar with system building. Thanks for the info!
I did a build with a Xeon e5-2667v2. Fantastic clockspeeds for an 8 core from that day and age. A total beast. All the HP z400 and z420 builds I've built has had people talking about these Dells as well, but the Dell variants around these parts were BTX (at least the x58 ones) and not case swappable like the z400s. Really dig this, thanks for the vid!
I've got the T5600 with two 8 core xeons and a 980ti, I even put a custom watercooling loop in the system which works really well.
I had a 27" 144hz 1ms monitor, for the same reasons you said. Decided to go to a 49" 4k TCL TV...and love it.
For things like War thunder you want a giant screen, spotting enemies is a LOT easier with more real estate as enemy tanks and planes can often be just a few pixles big
I bought a Dell Precision T1600 end of 2019 and put in an RX 570 8GB, a USB 3 expansion card and a new PSU. The T1600 uses the E3-1200 series Xeons. Another cool thing with the T1600 is it uses a standard ATX PSU so no proprietary power supply.
Now that’s a console killer right there
I've got 85 Buck into my PC. Fx6300 , rx 580, 16gb ram, 4.6 tb worth of HDD and SSD, RGB fans , EVGA PSU, and deep cool case all for that price..
Boomers - you can't build a pc for 200$ in 2020
Tech Yes City - Hold my G fuel
7:10 Stop! Hammer time!
I upgraded a similar Dell system. I ended up drilling out the rivets on the brace in order to get the side panel on. Your way looked a little bit quicker!
I was able to remove that internal handle by jamming a screwdriver under it and popping the spot welds off. It took a bit of time but it looks a lot cleaner imo
Correct,it was just welded and can be easily removed, instead of flattening it with a hammer.
If you do that then you take away the second use as a shield lol
@@trillabp3971 Tech Yes .... Captain Australia . LOL
@@manojgupta3770 lol
I have an 18inch CRT. 1024 X 768. 😀 The quality and brightness and clarity is amazing. Plus I can run GTA V at max settings at 85fps locked all day long.
CRT for the people.
LOL. Hows' your EYES now. Do you need specs ??
@@manojgupta3770 no. I have a wonderful experience with zero blur and vivid colours and contrast. You?
@@johnathanpearson3203 With just 5 years on CRT from 2003 to 2008, I needed specs.
@@manojgupta3770 yeah ok buddy. The CRT did it. 🤔
This is a WAY better deal than a prebuilt from Amazon. 😅
Let me guess. Used Xeon system.
Edit : Yup. I was right.
Yes. And it was beautiful.
get off ur ass
Actually blows me away how relevant the RX480 is still with current games. It’s no 2080ti but for how cheap you can obtain them you can’t go wrong with that level of performance.
Got mine (T5600) in a company decommissioning...for its $0 (its book value) in late 2018. Dual E5-2667, 32GB R-EEC 1600 DDR3, and 825W PS. I thru in a GTX 970 OC'd (for $120 in early 2019) and recently upgraded to dual E5-2689's (which together cost $160). 16C/32T beast. CB R15 score is 2200. With new SSD I invested a total of $350 for this rig.
..oh...and I also recycled and old Dolby 7.1 audio card from my dead Dell XPS 420.
Also, a recent office-lab cleaning and a junked T5600 with bad motherboard was tossed into the outside bin. I managed to retrieve the CPU coolers & PS in case of future failures. They are expensive to replace, per eBay prices.
You can customize these rigs...there is a UA-cam site for this: Green PC Gamers; where changing out OEM air cooling for third party coolers is explained, etc.
I also blinged this thing a bit. Took some Vinyl Carbon adhesive roll that I bought on eBay, the stuff used for car exteriors, and cut it to fit the side panel...just to spruce it up a bit for home office use. A nice black, red or other carbon 3D color makes this looks less business and more fun, though it is a beast for multi tasking and rendering.
The downside...BIOS is locked...certainly on the dual T5600. Which means the locked E5's with large core counts are preferred. I went with the E5-2689, which is an OEM special that is well priced and a solid performer. All core clock in turbo is at just under 3.2GHz.
Don't ask me about power consumption...I suppose this thing draws some serious wattage. No issue for me.
Hey Brian..if you want a couple of E5-2667's I can post them to your address, snail mail.
I have 4 of these systems that I built up as gaming rigs, you just have to click activate a few times, the COA for Windows 7 Pro will register for Windows 10 Pro
Correct . In my case the Windows License Keys were stored on the MB in form of Digital License, so as soon as I connected to internet and tried activating it got activated.
My PC is the same thing . Dell precision x58 and may upgrade to Dell Precision x79 later on.
If the GPU is artefacting then based on my experience, that PSU isn't enough to drive the system. The CPU chugs watts like it's at a hot dog eating competition and Polaris GPUs are extremely inefficient and power hungry despite their cheap price. Add to that the fans on the beefy cooler, 1.5V ram sticks, HDD and SSD as well as anything else and you are boarderline running out of PSU capacity. Even on PCPartpicker it will estimate your system chewing around 410W while you are powering the system with a 425W PSU. The GPU didn't artefact on your test rig because it had sufficient power. Either get a 75W - 120W GPU, downgrade the CPU to something less demanding, downclock the CPU or upgrade the PSU to fix. I used to have a Sandy bridge i5 with a GTX 1050 Ti running on a 265W PSU, let's just say I had to deal with shutdowns, freezes and blue screens until I upgraded my PSU
Lol hes Pc is not drawing more then 300w from the wall.
maybe superbuy is a good option for you (and others buying more than 1 item). You can buy RX 580 (4g) for €45-50 the downside is that the shipping cost is expensive if only buy one. But lets say you buy 5 of them you can probably get them under €300 with shipping.
I've switched from a 24" 60Hz FHD monitor to a 29" 75Hz 2560x1080 UltraWide last year and I like it a lot.
Reason is that I do not play any competitive games and for single player games like Witcher/Skyrim,etc this looks great and its even more 'Immersive' at least for me.
Sure some games still have issues with this screen aspect ratio and I have to look for a fix online but that I can deal with.
On a sidenote,this ~160 USD setup would cost something like 270-300 USD where I live 'middle EU'.:P
precision t3600 selling used for 400euro here madness, i had a flip on my mind but now its back to the grind!
You should look at his other x58 Xeon vids, you could get a Xeon, an overclockable x58 Motherboard, and a decent cooler, you'd be able to overclock to at least 4.0 GHz, the xeons are really cheap too
I dreaded the day I saw the 3600/3610/5600s on any of the tech UA-cam channels it’s been my staple for budget pc builds for the past couple of years.
There's also the HP Z2xx CMT workstations that can be made into pretty good gaming PCs with prices (at least in the UK) starting at around £50 (without shipping) on ebay for a unit that you have to add a processor, RAM, storage and a graphics card to.
I however, managed to snag a Z210 CMT with an i5 2400 and 4GB RAM for around £60 with the only extra costs being £30 for 16GB RAM and around £50 for a 250GB SSD (there's also a USB 3 card I added, but that has a few issues so it's likely to be taken out once I have a replacement) as I already had a 1050Ti and two hard drives that I was going to move to it from another PC (I didn't have to pay for a windows 10 license as the system still had its windows 7 pro license key attached which was good for activation windows 10 pro).
I also made some very good deals. Just bought 15 untested Xeon 2620v2 with one 2603v2 for 19€. 15 of the 16 CPUs actually worked. Then I got a 2630v2 for 12€ and a new LGA 2011 Board for 65€. I paired that with 16 Gigs of ECC REG DDR3 for 20€ and a GTX 780ti for 80€. For this system I spend 40€ for a PCIe SSD. So basically for 220€. I had a power supply laying around and also 2 TB of HDD storage, just missing a case
Obtuve un HP Z400 workstation con Xeon W3680 + OC a 4 Ghz utilizando Throttlestop software y funciona espectacular!!
You never fail to deliver on content!
i used a rx480 and fx 8350 for few yrs and still runs most games above 100fps, i switched and i now use that fx PC as my 2nd storage/streaming pc. they still have enough power to play most games just fine, its not a 2080ti, but it will give you a very playable experiecne.
I agree that 24" inches are the sweet spot for PC gaming monitors. Great video, keep the content coming!
In terms of monitor size, i would say it depends of what distance you are of the monitor, if you have a bigger table, a 27 inch is better if you look it from further away vs a 24 inch, but when i have went to a friends house to play pc games with him and he gives me almost a coffe table to play, then a 22 inch is obviously much better, lol. As for now since i use my pc for work, i got an ultrawide and never looked back, best thing ever in that regard.
I totally agree with this solution. I went a slightly more 'luxury' route. My HP Z420 workstation has the same Xeon E5-1650V3 processor but I re-used my Radeon RX580 GPU. The Z420 has a stock 600W PSU and with the use of a dual 6 into 8 power adapter it carries the load fine. I bought a Barracuda 500GB SSD and a 2TB HDU also Barracuda. I chose the HDU specifically because it is 7200RPM with a 256MB on-board cache. I spent approximately $150 more than you did but I use my workstation for everything. My type of gaming is RPG of one form or another and this system has more than enough grunt to run something like Elite Dangerous or No Man's Sky. Actually a really good performance test is Cities Skyline. On a large simulation it really loads up the GPU and the CPU. I also use my Z420 for Davinci Resolve, Reaper, Inkscape, Fusion 360 and Design Spark Mechanical. That's the great thing about using an old workstation, it's an enterprise grade solution that mere mortals can afford. My advice is buy the most loaded version that works for your budget. Don't think about upgrading the CPU or the RAM because it can quickly blow your budget and then these old machines don't make sense. Don't consider buying anything with less than 16GB of memory. Mine came with 32GB but I knew I was going to need the extra space for some of the non-gaming applications I use. A lot of vendors will strip out the CPU and memory to sell separate. It's fairly easy to upgrade the Z420 PSU to a stock ATX if you really need to run that 1080TI. In a couple of years or so I'll upgrade to either a Z440 or a Z840 (mmm, Dual Xeons).
BTW the aggro with hammer wasn't strictly necessary, It would have been a lot quicker and cleaner with a Dremel tool.
I agree 24" screen FTW. 24" 1440p 144hz G-sync is perfect for me.
GOOD MUSIC IS BACK THANKS MAN
Definite getting this when i have the funds. Thank a lot for the video!
I use a Samsung 4k/UHD 60hz monitor. It's fine for campaigns but I definitely need to get a higher refresh rate monitor for online gaming .
You can just unscrew the black rubber bumper from the side panel and it’ll fit chunky cards just fine.
Hey Bryan. Tech Yes Price Performance Budget Gaming!
Woohoo. Bargain!
24" monitors are great for gaming. 22" are also good. .
Cheers, Mon from Brisbane.
i prefer 22" because ive used a 19" lcd monitor for like 10+ years, 24" seemed too big for me
@@renko8065 I used 13" laptop for around for 5+ years then I went to a 24"
My monitor is a 24 inch but only a 60hz yet to get a high refresh monitor
Too small for my eyes 30" or 27" or 28" is good for me
@@paulb4uk if you are going to get one, get the AOC 24G2U 144hz 1080p IPS panel, 180 dollars.
minimum price of the Dell Precision T3600 is 200€ atleast in germany
Used to work in a pc shop that sold old workstations refurbished with gaming graphics cards as gaming machines. The z420 are really good and can power 1080ti's
The eternal struggle of working with proprietary power supplies/boards, it changes a man.
In case of T3500 you can just Replace the Dell Propriety PSU with an aftermarket one, without any issue. BUT not in T3600. Tat's why T3500 is my favorite.
I have dual AIO water cooling radiator in front (you will loose dvd bay) it pushes the air through the front mesh. Rear fan is flipped as intake fan. You could bolt a 90 mm fan on that mesh in the back, although there are no fan holes its very doable still.
Can even go bigger: the T5810 and lineup siblings have a Haswell/Broadwell capable C612 chipset and support 768GB of DDR4. If you’re nuts you can then run the 22C/44T v4 Xeons like the 2699v4.
Only downside is the Dell OE board doesn’t support overclocking or engineering sample chips.
Thanks, very informative!
Quick question: what are you using to clean the components? WD-40, polish or anti-bac?
Cheers and all the best!
I remember watching a video of him using break cleaner without acetone
And I believe he also uses wd 40
I'd ask the yes man directly before applying such chems
@@zacktrever1878 thanks mate, much appreciated!
Nice Video Bro ....... But You MISSED SOMETHING ...... Having been Doing Dell Mods for some time ...... here are some Tips
1) Go to tech Power Up Site and Download ThrottleStop Software. You can OVERCLOCK (in Windows) this system via ThrottleStop upto at least 4.1 GHz on all 6 Cores on this LOCKED DELL SYSTEM. Surprised?? I have been doing it since last 2 years.
2) Using Dual Channel Memory Bandwith on a System that Supports Quad Channel is a waste considering that Registered ECC DDR3 RAM are available at throwaway prices.
You will be amazed with the bump up in performance by OCing CPU to 4.1 GHz and Quad Channel Memory Combined.
My personal favorite is though the Precision T3500 because you can replace its Dell Propriety PSU with an aftermarket PSU which you cannot do in T3600. Also the Case for T3500 is bigger which allows many Cooling Mods which I have done. BTW T3500 also supports 6C/12T Xeons.
Hey I had a dell precision T3500. It had a xeon w3530, upgraded it to a x5675 and it was good to go. The system had a 80+ silver rated PSU so I coupled it with a 1050ti (could have got a 570/580 but I got a great deal) added in some ram and I had a system for around $130 (US). I gave it to a friend who was getting into PC gaming and it fit perfectly for him.
Good Man. T3500 is Cool. Unlike T3600, in T3500 you can replace Dell PSU with an aftermarket PSU without any issue (in case if the need arises). Also with larger case lots of cooling mods are possible.
@@manojgupta3770 Yeah I thought about modding it but I wouldn't know where to start besides swapping cases since the default one is so unwieldy. I did consider switching the power supply when I was debating on a 580, but it worked out since the included PSU is decent with a (relatively) strong 12 volt line.
@@laynewoodruff7502 at least add a 90 mm fan to the CPU HS, a 60 mm fan on North bridge and in my case I even put on my Old Dead Laptop's HS on the Southbridge of T3500. T3500's NB and SB becomes very hot ater few hours of work. Check this out.
For me the ideal monitor atm is 27 inch 144hz 1440p, IPS prefered. Super smooth and crisp.
The E6 2697v2 works in the same socket, and has 2 qpi links, so you can theoretically have 24 cores and 48 threads by using two of them
12 to 13 ways to BEAT your system lol. I've never seen a Tech Yes Beating a system into submission but it seems like that side panel worked like a charm afterwards. All kidding aside, thank you for the video and great information. 👍👍
For effective cooling, You can add a 80 mm fan to the CPU HS and also cut a portion on side panel and put up a mesh there.
I use dual 1080p 144hz G-Sync (compatible mode via Freesync) and wouldn't want anything bigger for anything TBH. First time with VA panels and I'm sold on that tech for now, too.
I would not suggest a proprietary PSU to newbies, when there are plenty of similar ATX PSU models to be had out there instead.
In cast of T3600 you cannot replace Dell Propriety PSU with an Aftermarket PSU. BUT in case of T3500 you can do it without any issues. That's why T3500 is my favorite. Its cheaper too and also support 6C/12T Xeons andcan be Overclocked via TS / XTU .
love the content but one tip as a fellow pc builder, a dremel can go a long way and can be a lot cleaner finish than a hammer
It’s insane how many cores and threads that old tech can get you Xeons were ahead of their time
Came here for that tech yes loving. One day I will be able to clean my PC like our main man 😎
Well done! Enjoyed this very much
67 dollars!? The cheapest here in the Netherlands are 325 euro!
4:25 to 7:30 - Goonzquad vibes 😁
Another awesome build!
I thought about that also
The side panel issue with the t3600 is very real. The gpu should have a power connection out the back rather than the side. Or a PCI-e powered card.
Nice tool ...hammer ...and t shirt for cleaning....nice as always...
whenever I play on computer cafe's with 34'' monitors, I always resize my games to 1360x768 because it is easier for me who's used on playing on that kind of resolution, thumbs up for the vid! I hope I can find and buy a computer like this
Over here in Brazil used pc parts aren't cheap, this workstation is about 500US$ used for the quad-core version whiteout the GPU on our ebay equivalent
Problem I've had since returning to the UK from Oz is that the prices in the used market are appalling. The same machine from eBay or marketplace sells for around $200 just for the T3600 with lower specs. Shipping from abroad is out as well as the cost of postage jumps the price up to around a similar price point.
I've had more luck flipping old Core 2 Duo/Quads with SSD's for people wanting a day to day machine but obviously a smaller profit per machine.
Only Cheap local second hand deal makes sense. Else go for Ryzen.
I like how Tech YES City is giving good tips thats logical in comparison to whats out on the market. This is the opposite of all the Companies creating builds and Selling them for 4/3 parts of the price
This is smart. Thank you
Hey Bryan, talking about those video artifacts, hope this can help you. I noticed my MSI RX 580 Gaming X starts acting a little weird (but not nearly as much as your GPU) when temps are in high 70s. A custom fan curve solved the issue during hot summer days. I noticed this behaviour only during very hot days while gaming with a little overclock on both core (+60MHz) and memory (+240MHz) but still at stock voltage and stock fan curve, otherwise GPU always stays in the low 70s in my case with zero problems. Cheers!
I went from an old 32-inch flatscreen tv to a philips 247e4 (23.6 inch)
Took me about 2-3 weeks to adjust to the smaller screen.
I prefer the smaller screen when playing games like Rust and Halo 2 multiplayer.
But in the future when i upgrade my gpu i'll also go back to a 32 with high refresh-rate.
Seems like the sidepanel needs modding. Putting vents in it and adding fans if possible should help.
I like when you show new gamers this type of price to performance buys and dont cause a mad dash for the good stuff causing further price hikes on the used market.
I cant believe people are still trying to get 100 bucks on ebay for a R9 380 its just plain madness
My only worry about this build is regarding the health of the hdd and how long it might last the future user. That drive says it was made in April 2010.
Of course, you need to put in a new HDD/SSD and a GPU.
Wow. That is an incredible rig for the price. I've got my fancy rig at one house that I fully built myself, but at my other house, I have put together a budget system I’ve always considered nice. I’m getting ready to upgrade the CPU in it from an I3 2130 to an I5 2400 since the CPU bottlenecks me from time to time. I only have a GT 1030 though. If you count the tower alone, I have invested about $100 into it as my grandmother gave me the computer for free after the hard drive died in it and she bought another computer. It would be more if you count the mouse and keyboard and things like that. I have put a GT 1030 in it and am getting ready to do that CPU upgrade. I also hope to add some more RAM to the already existing 6 GB in the future. I have always considered that system nice, but this is kinda crazy. I’m still satisfied though as that system is honestly nearly as satisfying to use as my other one and the 900p 5:3 monitor I have from 2007 has no problems with only a GT 1030.
I sold working station with Xeon E3-1240 V3 CPU, it was a huge mistake. Gaming on this computer was the best. I will never do it again because the CPU temperature was about 58 Celsius, and it was the most silent machine I ever had. In pair with XFX HD 7770 GPU it was great in games I play (WOT, Civilization II and III, etc...). On Passmark this CPU has about 7100 points and it is fantastic base to build a gaming machine.
I use my 43" Toshiba 4K tv for gaming however, in all fairness, I do sit on the couch about 6 ' away.
I love this channel and old dad ! ❤
You need more likes as in MORE LIKES!!
You open my mind to use parts that has been used and is not really expensive to build your own pc gaming system
yeah but the problem is that those deals are almost impossible for the regular Joe, for example in my country a machine like this costs like 400 usd...
That aussie accent makes this so likeable
Would have dremeled that side panel down so it can stay shut. Also would have mounted a fan behind the CPU and in the front. Couldn't hurt anything and might solve the thermals.
Any chance you'll be doing a X99/E5-2678V3 setup review video? Seems like the prices are coming down for the CPUs themselves, and the Aliexpress X99 boards seem quite affordable now. Plus, the E5-2678V3 has both DDR3/4 memory controllers, which would make this an appealing alternative to X79/X58 platforms.
This particular model came with the 430w psu which will give an error in the bios if you've got a graphics card plugged into the add on pcie extension cable. Any of the power supplies for that model use the same daughter board tht will accept the same pcie extension cables. Be careful with which one you choose. Any of the higher wattage power supplies won't have that issue
Hahaha. That's one way to adjust the internal brace. I used a drill to drill out the spot welds and it came straight off.
Correct,it was just welded and can be easily removed, instead of flattening it with a hammer.
Loved the hammer part.
Dell Optiplex 3020 (4th gen i5 @ 3.5 GHz) + GT1030 + 4gb RAM extra + 120gb SSD = $200 USD entry level gaming rig.
I think 1440p is the sweet spot if you have the right card. With that being said my favorite used/discounted price combo when I have to build systems for people on a budget lately is a new B450 mobo, 1st or 2nd gen ryzen as they can be had for cheap even new, and a used 1070 cause it's just the sweet spot for a 5-600 dollar gaming rig.
I got a MSI RX580 8GB and 600 watt EVGA 80+ PSU and 2x4GB 2400 DDR4 RAM for $110, then I picked up a m.2 248GB SSD off ebay for $30 and a m.2 to SATA adapter so I can use it with older PC's if I go that route. Still need a case, motherboard and processor though, so this might be a great option for me. Did have everything plugged into an HP Pavilion Slimeline s5580t with an i5 650 @ 3.2ghz but the motherboard died on me.
I love getting the most out of older hardware.