10 Forbidden Practices in the Workshop
Вставка
- Опубліковано 16 чер 2024
- Register to vote: headcount.org/gtv
A list of forbidden practices for a small workshop.
0:00 Message from a Kickstarter backer
1:08 No Bare Feet
1:30 No Straight-Edge-Guide for Cuts
2:32 No Fixing Garbage
3:11 No Tripwires
3:37 Do Not Migrate Tools
4:03 No Flat-head Screws
4:50 Do Not Use the Last of Anything
5:30 No Hoarding Materials
6:21 Do Not Lend Tools
7:27 Do Not Switch Horses Mid-Stream
Become a patron to support the channel and gain access to exclusive Director’s Commentaries, Q&A Livestreams, Peer Discussions and Limited Edition Zines: / spiritedman
🦺 SPIRITED MAN MERCH:
T-Shirts, Sweatshirts, Hats - spiritedman.com
📹 GREATEST HITS:
VAN NEISTAT: The Spirited Man - • VAN NEISTAT: The Spiri...
VAN NEISTAT: Fantasy Fixing - • VAN NEISTAT: Fantasy F...
2 things to know about women - • 2 things to know about...
We Are In A "FOURTH TURNING," What Does That Mean? - • We Are In A "FOURTH TU...
The Reality of Owning A Vintage Truck - • The Reality of Owning ...
Why Do Details Matter? - • Why Do Details Matter?
📚 READING LIST:
Shop Class as Soulcraft by Matthew Crawford - amzn.to/3ipz4br
The Fourth Turning by Neil Howe, William Strauss - amzn.to/37J9FYn
The Hero with a Thousand Faces by Joseph Campbell - amzn.to/3ik8Hnm
The Coddling of the American Mind by Greg Lukianoff, Jonathan Haidt - amzn.to/3qcTUzl
Breakfast of Champions by Kurt Vonnegut - amzn.to/3ImOHLw
Fear and Loathing in Las Vegas by Hunter S. Thompson - amzn.to/3qjYGLw
Collected Essays by James Baldwin - amzn.to/3qgYInm
The Outlaw Bible of American Literature by Alan Kaufman - amzn.to/3N64stJ
What Is Art? by Leo Tolstoy - amzn.to/3u2fqI8
🎥 FILMMAKING GEAR:
Canon 1DX - amzn.to/3MYfq4J
Wide Lens - amzn.to/3Jqiy6W
Macro Lens - amzn.to/37BnQyt
GoPro 10 - amzn.to/3u7O9nC
RODECaster - amzn.to/3iocSOU
Shure SM7B Microphone - amzn.to/3u9yOD1
DJI Mavic Air 2 Drone - amzn.to/3KVd8kN
🧰 ESSENTIAL TOOLS:
Swiss Champ - amzn.to/36b1vrl
Leatherman - amzn.to/3Ilb04b
Pentel 0.9mm - amzn.to/3Io5TQX
Sledgehammer - amzn.to/3Io5UV1
Vice-grip - amzn.to/3qiuccx
Follow Van Neistat
📷 Instagram - / vanneistat
🖼 Website - www.vanneistat.com
Would you like to advertise with us, direct business inquiries to: blewis@spacestation.com
ABOUT THE SPIRITED MAN:
The Spirited Man is an unlimited series about the spirited man or woman who lives inside all of us (and fixing things).
ABOUT VAN NEISTAT:
A pioneer in digital filmmaking, Van Neistat made his first internet video, The Holland Tunnel, in 2000. He went on to collaborate with New York City artist Tom Sachs, directing a series of short films shown at the Guggenheim Museum in Berlin. Van has since directed dozens more films for the Tom Sachs Studio. In 2010 HBO aired The Neistat Brothers, an 8-episode series of short videos made entirely by Van and his brother Casey Neistat. Van Neistat’s directorial debut feature, A SPACE PROGRAM, co-written by Tom Sachs, premiered at the 2015 South by Southwest Film Festival and opened in theaters nation-wide in spring, 2016. In 2018 Neistat Directed the short film Paradox Bullets, co-written with Tom Sachs, narrated by Werner Herzog, and starring Ed Rushca. Neistat has written and directed commercial projects for Nike, Hurley, Kate Spade, Tory Burch, J. Crew, Twitter, Sleepy Jones and Frances Valentine. His work has been exhibited in museums throughout the world. He lives in Topanga, California.
Disclaimer: If you use any of the affiliate links above, we may earn a few cents from qualifying purchases.
#VanNeistat #TheSpiritedMan #Workshop
One commandment my dad taught me and hounded me from a young age still rings in my ears to this day, "The job is not done until the tools are put away." Have lived by this motto and never have had a problem with messes, or misplacing tools ever since...
My version is: "You're not done playing 'til you put your toys away." I will recite this to myself every time I've reached a stopping point.
The only time I lose a tool is when I put it down and go to look for it less than 3 seconds later.
I feel simultaneously validated and attacked. Thank you for your service, sir
Haha 😂
Yes, this was my experience too. Appreciative and offended.
🤣😂
The only single quibble I had was the “no flat head screws”😂 when building furniture that has hardware of brass, bronze, or iron, nothing looks worse than a Philips, Torx, Roberson, etc…. Those applications absolutely required a hand driven flat head.
*admittedly, I’m primarily a hand tool woodworker.
-a huge thank you for your content ❤
Yes, exactly. Not just in furniture: slotted screws are without alternative for a number of things, especially stuff made pre-1930s. It’s okay to hate working with them, of course - but replacing them in such items is a bit of a sin. And we’re usually only talking about a few, not hundreds.
Also, it would be cool to call them “flathead” screws if that didn’t have another, different meaning: flathead screws are countersunk screws with a flat head, the ones with a slot across the head are slotted screws.
And guns use flatheads, looks better. No other way around it.
I spent my youth working in a mom and pop hardware store followed by a century old family lumber yard.
I am not the expert. When I hear Van say 'flat-head screws, I translate that to slot head. Using a flat head screw driver. I will use countersunk flat head head screws with a Phillips drive. Never with a flat head screw driver.
Tomatoe tomato. Potatoe potato.
As a son of a hoarder, I find it really difficult to not hoard scrap wood and spare hinges, door stops, odd sized screws etc . The "I might need this someday" dialogue is constantly replaying in my head. However, I am very organized with my tools, and my workbench is ALWAYS clean after every project.
Side note: I never use flat head screws (I think the devil invented them), and as a Canadian I often don't use Philips either! Robertson (square) does not have cam out issues!
Robertson all the way
I keep the rustiest Robertson screws after removing them, to use in another project, because fasteners are money, but no matter how new, I throw all Phillips screws out unless if they were designed for use with a particular kit. Not worth hoarding them.
#5 - No flat head OR Phillips head screws. (Canadian version) ;-) Robertson, hex, or Torx are fine.
roberson are not fine they are trash. im half canadian they are still shit
I'm just guessing you mean slot head screws.....not flat head.
Came here to see if someone else had said it.. Robertson ftw! Amazing for just about everything.
@@larryfisher7056 Yup. Button head slotted drive screws are the worst, followed by flat head slotted drive and Phillips in either configuration. Button or flat head in Robertson, hex socket or Torx are great!.
just try finding Robertson hardware though... it's tuff and I believe them to be the best.
1:42 I’ve cut laminated signs for five years using a straight razor, each time we were cutting on top of a pre-printed line but we nailed it every time. Never cut a straight line freehand, it only leads to mistakes.
With peace and love to the spirited man
Oh man…. I’ve only ever cut straight lines both with the penciled in or printed line AND with a good straight edge. I worked at a sign shop for 15 years and I still make small signs for my current job. I just always make sure I use a very heavy ruler with some grip underneath. I can only remember messing up once.
I’m a lowly general contractor. Did historic restoration and architectural renovations in SF for decades. I’ve saved/stored many materials over the years. Just finished cottage on the property with many of these items, sinks, fixtures, electrical, wood, siding, etc. very satisfying. Flat head screws have there place. On wooden boats. Where they are countersunk, caulked and bunged. The slotted or flat head is easier to clean out to extract when repairs are needed. Probably one of the only places I’d use them in a new project.
I need this. Somehow I followed some of this principles but you just articulated them so beautifully. Thanks once again, Van!
As someone who may not be the target demographic of this channel, this is still my favorite channel and you, Van, are my favorite creator
I'm loving your channel. Best new advice from this video: No hoarding material. I feel a sense of guilt if I throw something out that might be useful in the future, but you're right. You can't collect everything. Also, no fixing garbage. Good call.
This video is absolutely spot on, Van! Priceless information gleaned from years of experience. This is one of your sweet-spots for consulting work IMHO
I watched this as a kid been reprehended by a dad. I understood the message and I felt the love. Thank you, Van.
I finished a project yesterday, cleaned my shop today, starting the next project tomorrow. Making videos about each project has helped this practice a lot!
Same! I was a MESS until I started making videos of my projects :D
Comments drive traffic to your channel. Nice workshop.
I feel you on number 1. A friend says I have a black belt in the partial arts. I have so many projects 25 or 50 percent done.
Nice tips Van, thanks. I'll take the ones that work for me & my circumstances, and ignore the ones that doesn't, and adjust as needed.
You're so cool and have a really engaging way of sharing your tips and experience. Thank you for sharing!
Looking back at some of the darker moments in your life that you've shared with us, I really enjoy seeing this version of you truly being celebrated by the audience and by yourself. It's such an awesome thing to witness you creating this unique niche where you can sing and just be the most authentic version of you. I'm definitely stealing these tips, sharing them and applying them to my personal life beyond the workshop so thanks for that Van!
New Van video always brings a smile to my face! Thank you Van!
I would agree with everything and it seems that this was almost you speaking to yourself on so many levels. This coming from someone who struggles with all of these things, I would say that a clear workshop creates a clear mind and therefore productivity increases 👊🏾
A man I admire, I had very few interactions with, and unfortunately passed away in 2016 told me: "what you do before and after the thing, is as important or even more so than the thing itself".
I noticed you’ve made a wooden top work bench out of a trestle table. Would be awesome to see a video on setting up an outdoor workspace, for people that live in apartments and need to use common yards etc.
You're awesome Van! My favorite part of this video had nothing to do with the message of the video but it's how I raised my boys as well. "I warn him, then I let him get hurt".
This is the most authentic content right here. Bless this man!
Great vid! I'm inspired to stay on track with my current project!
Another great video! I don't have a shop but i really appreciate the advice!
Awesome video, thank you for it. You seemed to be really happy while making it :)
Van - Discovering your writing and work feels something akin to finding someone that speaks your language in a foreign country thousands of miles away from home. I'm not sure what else to say. As a writer and dad, someone that tinkers in a shitty garage shop, writes in a little shed, a dad that writes down rules to live in a large book to hopefully give to my kids when they move out, your work really means something to me.
There is a reason why no one should ever use flat-head screws - if a screwdriver slips from a slot, it goes into your hand.
And even if it doesnt go into your hand you immediately wish it wasnt a flat head
There are perfectly good reasons to use a flat head screw. Ships are a great example, or any environment where debris gets trapped in screw heads because you can easily clean a slot. Good luck cleaning 50 year old paint and grime out of a Torx head.
@@Nubby007 grime and dust etc. In the torx or philips would bother me a lot less than a slipping flat head
@@smashyrashy Here here! Agreed good sir.
good point. probably the single most common tool injury on earth.
Rule 0: Never ever use an angle grinder without a blade shield in place.
I love this. There's so many tips that I'm putting into practice. Namely: "Do not migrate tools" GUILTY, "Do not use the last of anything" GUILTY, "No hoarding materials" GUILTY, "Do not switch horses midstream" SUPER GUILTY.
Thanks Van!!
When I was at university we had a long straight edge with a rubber no slip base and had a deep V shape groove in the top to protect your fingers from slicing
Van - thank you for sharing your wisdom; this was fantastic!
Thank you for the weekly sermon. I mean that in the nicest way possible.
I love this. I've done all of these, time to incorporate this list into my life.
That is pretty much what my Dad told me every day after I left HIS workshop: "keep it organized". My answer "little spirits keep order, genius surveys chaos". He is dead for almost 40 years. I still hear his words, he even made a sign from a piece of wood for me to remind me of cleaning up. Needless to say that MY workshop is very, very organized, now!
And I agree the best way to find little metal pieces with very sharp edges is - walk into you shop bare feet :)
I feel so god damn mad at myself for watching your brother for YEARS, and now discovering that your content is so much more beneficial in my life. Now let me go finish a project.
Great video van! All taken in and valued
The best way to end a hectic editing session is to watch a Van video … so calming 🔥💯
Asking for subscribers without asking for subscribers
I feel spirited, doing things around the house since you started this UA-cam Channel. I am watching you becouse of Casey's mention. Thanks to him too! Keep it up! Tamas, Hungary
Flat head screws are good for their purpose. They might show weakness and you will feel awkward when used with motorized, electrical, pneumatic screwdriver. Yes motorized screwdriver works fine with center oriented ph, pz, torx, etc screw heads. Quick factory assembling. That's the main idea. They are designed for that. I've seen many spoiled ph screws. Especially self tapping screws. But when used with nuts and without electric screwdriver in lots of places flathead screws are absolutely ok.
About those Phillips screws, what you really want is the Canadian designed Robertson screw. Superior to all including Torx.
I agree with that list, Van. Some great advice to live by!
I like that the story of building something is woven parallel to the story of the video. Its very engaging.
Hello, my name is Pete and I'm a wood hoarder. I've got wood in my shop from the early 2000's. The only small pieces I hang onto are the more exotic species, but I do have to confess that they gather a lot of dust. I'm on a no-purchase restriction (unless a project calls for something directly specific) until I use up a lot of the hoarded wood supply. It's crazy how much space we surrender to stuff we're not using and don't even have a plan to use. I'm using a fair bit of it now in preparation for my own first kickstarter, for next year's Make100. Van and a few others have inspired me to start putting more out there and exploring "my art" more and more. It's tough to walk by some of those pieces at Woodcraft or a lumber supplier though!
I'm definitely behind these rules, the only rules I was guilty of violating are the lending of tools, which I've stopped doing, and using a hard edge with my Stanley knife. I learned that one the hard way. Thanks Van!
Oh this is sooooo good! Thanks Van
Love the video Van!
I pretty much learn all these rules along the way. Hoarding items, overlapping projects, they all lead to messes.
Thank you for the good advices ! Really great
Foam backed rulers have been good to me, I built architectural models for 5 years. I agree with you on really long cuts though.
Interesting! Thank you for sharing it ✌️
i agree with all of these. as someone with adhd it's so hard to do #1 but i keep trying.
Great video as always Van, I still fall into the “do not switch horses mid stream” trap ALL THE TIME. I am getting better at following through, to me that’s the reward.
"Do not use the last of anything"
I really like that one
Number 1, is a very good shout, I try to stick to it. I have a current build going on so no other builds, but I did a repair project. But flat head (slotted screws) do have their place, in very rare cases very rare.
I've cut thousands of pieces of paper when prototyping, and I always use a ruler-with an antiskid material on, of course, the kind made for that job. Then it doesn't skid and your cuts will be perfect. Also, flathead screws are awesome. If you look into fine woodworking you'll find a lot of flathead screws and learn about clocking. I would never exchange a flathead screw on a repair, if it had an aesthetic quality to it (like old furniture).
AGREED i will ad to that with the fact that i have never stripped a flat head screw. but you even look at a Phillips head the wrong way and oops boom stripped bare FLAT HEAD FOR LIFE
Thank you. Will do respect them.
Very helpful practices here. Thanks!
#9 just saved me a bunch of grief, sir. I salute you.
As much as I think these are common sense, I take them for granted often. Appreciate the reminder along with the explanations :)
Oh man... I cannot express how I LOVE your beard!
Just keepe it!
Van blessing us with knowledge
Fantastic advice here!
sage advice. love these.
“No straight edge” is great for accuracy based tasks. But a straight edge is for precision based tasks. That’s why it’s called a *Straight-Edge*. Using or not using one just depends on the goal of your task. If you absolutely need the finest line you can (which I do when making foam board models) you can’t go with anything other than a metal edged ruler.
And you’ve gotta get a good alumi-cutter/straight edge with a rubber foam or silicone bottom edge to prevent sliding.
great tips, love that last one
Rule #1 is one to live by. I can't even make a new meal until the kitchen is cleaned and reset from the previous meal. Same goes with any project.
i thought only God could pull that one off
I'd argue that some brass dome head slotted screws on a high end music box/jewelry box is unparalleled sexiness.
2:05 it will also shift a little bit when you are drawing a line, if you are able to draw straight line using scale then you can also cut a straight line, as the pen & cutter have identical shape
I need to break #3. I hoard a lot of scrap materials, mostly wood. In fact I stopped at my neighbors house this morning and picked up some old wood he was throwing away. I also built a ~2'x5' lumber cart thinking it would organize the "collection" but that lasted maybe a month and has since turned into 75% junk. I use a lot of the bigger pieces but the cutoffs accumulate quickly.
To live by thanks your the best I needed this today
Van's videos are about the only videos I give an automatic like too. Without having seen the video, I already give it a like.
Now, you may think or even Van may think that giving a like without watching the video first is like giving an undeserved reward. Well, If I didn't like the video in the end I could take out the like, but that's never the case. If I could I'd support him in Patreon or the likes... but as it is, I'm doing the best I can.
He's a great inspiration to me and his videos and art are a delight. I have named my latest series of personal journals "The Spirited Man" in his honor. It just consists of sticking the logo onto the journal cover but It brings a swell feeling nonetheless. Anyhow, just something I thought I'd share.
Thanks - that will help!
Thank you
A trick I use to break rule #9: I have some iron rectangular weights from a scrapped weight lifting machine that I glued cork padding to. I set the straight edge, and then weight it down to keep it stable. It's especially useful when cutting leather or thick foam where you'll want to make multiple passes.
Van, the workbench is like an altar and you are its acolyte. I can't speak for everybody but I grew up with a lot of good memories around the workbench. It's really sad and contradictory to see it become an excuse to hoard and a junk-pile among close family and acquaintances of mine. Like, they still have reverence for it but it's only a shadow. Thanks for this.
Such great advise :)
Great Vid Van!
Your no flat-head screws thing made me laugh. One of my clients repairs and rebuilds antique furniture and early 1900s motorcycles. His rule is No Philips head screws allowed in his shop, because they didn't exist during the time anything he works on was made.
Your brain is awesome!! Love your videos! 😊🙏
Thanks Van!
These points are valid and oh so true. Well done 👍
excellent video van!!!!!!!!!
Van I need a video about your outfit, I find every piece of it really fascinating
Omg the straight edge advice is spot on, I just did it this week and man it was really off
The #1 practice is gold!
Awesome job van
Number 2 does not apply to everyone all the time but most people always. I'm the type to borrow a tool and return it that same day or the next day if it'd be too late to return it after I used it. I make this a practice after years of my things going missing for months and knowing the frustrations but also wanting to be held in such a regard that no one will have issues with me borrowing any tool at any time when I'm really desperate for that specific tool.
And if you need to borrow a tool 2-3 times that's when you just go buy yourself that tool.
Great take on why to vote.
Resetting the workstation is tough when I run out of time but it does have fulfillment when you know everything is positioned to do the next job
Perfect!!
NICE!! Van, please do a video that is a tour of your flippy, latchy workstation thingy.
God bless this man
in my architecture school i developed that rule number 9 is hybrid, first draw a line, and cut a small checkpoint free handed, split it into several section that probably gapped less than 20cm, then use a metal ruler (i used to chop off the damn plastic with my razor cutter)
Thanks
I'm really happy no flathead screws made the list. What a trash fastener.
My asub-addition to that would be no wood style screws for metal. When I'm taking something apart to salvage fasteners those those go right in the trash.
Huge Inspiration
I love it!
Thank you! Brevity is the essence of wit.
4:45 Torx head are the best screws!