REWA iPhone Chip Level Logic Board Repair Training Course Schedule - Global Program For 2019 For the details: bit.ly/2PAQ5yJ Enroll Now: bit.ly/2CbDDSN Any further questions please contact us at: training@rewatechnology.com.
you all probably dont care at all but does anyone know of a way to log back into an Instagram account..? I was dumb lost the password. I would love any tips you can offer me
What I like the most in this channel is the expertese of your employee, they know exactly what they are doing, they diagnosize each problem to come at last to the perfect solution, keep up the good work
I wonder that technology still not changed, i showed Nokia UEM Changing method in 2010-11 at my old channel *pakfones old* with basic tools. But i liked and enjoyed the method of soldering CPU same as i done in past without attending any mobile repair training institute.
did you measure every little capacitor for voltage on those 16 power rails? and they all had the value that was saying on the schematics? For example, schematics call for 6.3 on C1719 cap at 1:45 in the video, is that what you got? did you check all 19 caps on that pp3v0_nand rail? and did the same for all the others?
I have got one question- Can you read MacBook EFI firmware password using programmer or other tools? But not reset it, actually read the password? And how?
a most superb job.well done very concise and clear.thankyou so so much indeed for the information also on the power points to measure,thankyou loads,most most helpfull, keep up ,the superb work and videos.perfect.
For the detail fo the solder paster, please check this link ( shop.rewa.tech/detail/low-temperature-lead-free-solder-paste-oem-new.html ) as a reference.
It must be hard to repair it when you have to sit all the way back and not get a close look so your head doesn’t get in the video. I had to do the same thing and I nearly broke my iPhone 6 I was refurbishing.
Sir i have iphone 7 with baseband ic issue which shows unable to activate screen and shutdown, if i borrow same chip with another iPhone 7 will it change imei? Or i have to program it or anything like that?
@@peverellpoulin5087Most of the chips on an iPhone are interchangeable. But he CPU, the baseband CPU and the NAND will have to be from the same device since they are encrypted together. The NAND is a special case. With a NAND programmer, you can read, write, alter or transfer data from the NAND. But dimoly changing the info on the NAND will not work. All three, the CPU, the baseband and the NAND all need to have the same data.
Please sir upload video about basic method of motherboard tracing how do you know direct where is exactly fault plaese tell me about sir I am half technician of mobile
You don't need to trace the motherboard, just search up a schematic of the iPhone you want to fix. Make a list of the 16 power lines, and then CTRL-F to find which parts of the board you can access them. (And of course, find a ground point as well.) Once you find the part on the schematic, find it again on the PCB layout. Hope this helps :)
Leonard Sylasani you can’t, batter to either part the icloud locked phone you have out or sell it as parts, you can hardware unlock it but it’s super hard and very expensive
Unprofessional! No need to break the shield to remove U2 and even tho no need to replace with the new one to see if it’s ok! Just remove it and turn it on if it’s the u2 then the device turns on and enters a loop, anyway you could realize the cpu issue by measuring the feedback line when it’s not connecting to the cpu right then fb line is 4V !
Can you explain a little more this: "anyway you could realize the cpu issue by measuring the feedback line when it’s not connecting to the cpu right then fb line is 4V !" Thanks
REWA iPhone Chip Level Logic Board Repair Training Course Schedule - Global Program For 2019
For the details: bit.ly/2PAQ5yJ
Enroll Now: bit.ly/2CbDDSN
Any further questions please contact us at: training@rewatechnology.com.
Awesome I want to learn this types of skill
REWA Technology
I'm so looking forward to 01.04. on my training with rewa in czek
@@munaabdalmalek5586 Looking forward to seeing you then. And hope you will enjoy.
you all probably dont care at all but does anyone know of a way to log back into an Instagram account..?
I was dumb lost the password. I would love any tips you can offer me
@Mordechai Kace Instablaster =)
What I like the most in this channel is the expertese of your employee, they know exactly what they are doing, they diagnosize each problem to come at last to the perfect solution, keep up the good work
Thanks. what you said really encourages us. We will keep up our efforts.
Sir tell me please cleaner name
Right tools is half the job….then skilllsss....
Your video is more inspiring for us, with the help of which we have been able to increase our skills. From india
Your working table is awesome
emm,and I have the same one
Looks so easy but when you try, it's really hard..
Still practicing!
Needs a lot of patience.
But I can still learn a lot !
What bonding pastr are you using?
Bro what software do you use to open a Network locked phone??
Oh..God...! you guys are really awesome 👏 😎 .
I wonder that technology still not changed, i showed Nokia UEM Changing method in 2010-11 at my old channel *pakfones old* with basic tools.
But i liked and enjoyed the method of soldering CPU same as i done in past without attending any mobile repair training institute.
did you measure every little capacitor for voltage on those 16 power rails? and they all had the value that was saying on the schematics? For example, schematics call for 6.3 on C1719 cap at 1:45 in the video, is that what you got? did you check all 19 caps on that pp3v0_nand rail? and did the same for all the others?
These guys are just more than the best
hi , is the CPU you did change that you fix again or new CPU are fixed ?
same issue my phone
that one done
thanks
You are great teacher in the world
And you are a great subscriber in the world.😁
A most superb video.keep up the excellent work folks.well done.
Is the temperature used to remove cpu the same temperature used for removing any other ic on the board or do you go higher for cpu?
Yes it is just use a Heat Tape to protect tge surrounding area
This video very helpfull mobile tecknisian
very informative and helpful
Good job Rewa
I have never seen before like u technicians in word u are great sir
I salaute sir good job
Hi bro big fan ......for technology plz.i want your advise..
These guys are just amazing! Nothing to say.
I learn a lot on this video
Hope it helps you somehow :)
thanx alot for ur channel
BRAVO
😍😍😍😍😍😍
The best channelle
Sir, how much air, temperature and timing have you kept? Please tell me sir
Awsome job😊
1st comment to idol 😊
You are the second
Der Nik 😊
Superb job as allways.spot on.well done.
pls upload android phones troubleshooting videos also.....urs video so nice
Parabéns vc ganhou mais um escrito pelos seus vídeo 👏👏
I have got one question- Can you read MacBook EFI firmware password using programmer or other tools? But not reset it, actually read the password? And how?
Very clear work 👍👍
How much hot/tem or air???
Quick 861DW HOT GUn
你用的工具哪里可以买到？
Great video. Very nice skills.
Thanks for watching :)
a most superb job.well done very concise and clear.thankyou so so much indeed for the information also on the power points to measure,thankyou loads,most most helpfull,
keep up ,the superb work and videos.perfect.
Ooooooooooooooooosome!!!
Fault finding Great nice 👍👍👍
Great work
very good job sir
what solder paste you use what brand
For the detail fo the solder paster, please check this link ( shop.rewa.tech/detail/low-temperature-lead-free-solder-paste-oem-new.html ) as a reference.
very nice video
Good job
What time is it plaisé
Hello I have one Question ?
It must be hard to repair it when you have to sit all the way back and not get a close look so your head doesn’t get in the video. I had to do the same thing and I nearly broke my iPhone 6 I was refurbishing.
Practice makes perfect. It seems they have many good masters! lol
good job
Sir apke India me koi beach hai kya please comment
Good sir
How much hot/tem or air???
grand salute sir
What temp for using the wick to clean pads?
For reference only, with our equipment and environmental temperature, the solder iron temperature we applied is about 400℃.
Very good vidéo
How to use température for remove Cpu ? 🤔
Repa Green its my question too
but i found it in unionrepair page from year ago
yones rasti oh you have information ?
Nice video
Sir i have iphone 7 with baseband ic issue which shows unable to activate screen and shutdown, if i borrow same chip with another iPhone 7 will it change imei? Or i have to program it or anything like that?
Yes, needs to be programmed before install.
@@peverellpoulin5087 do we get orignal motherboard of iPhone 7?? Or if we fix chinese motherboard for iphone 7 will it work smooth like new?
@@peverellpoulin5087Most of the chips on an iPhone are interchangeable. But he CPU, the baseband CPU and the NAND will have to be from the same device since they are encrypted together.
The NAND is a special case. With a NAND programmer, you can read, write, alter or transfer data from the NAND. But dimoly changing the info on the NAND will not work. All three, the CPU, the baseband and the NAND all need to have the same data.
Sir,
How to detect cpu problem.
I took my broken iPhone to a phone repair company, they told me the cpu is bad. Can a cpu be fixed to retrieve data?
Nice sir
Broken CPU possible to repair and get the data from iphon
nice sir
so easy 😁
😜😜
I wish i have that kind of hand
Why do you remove the black sticker from the shield before removing the shield? It will still pop off with it attached
withouth the sticker hot propagates easier, so less time applying hot and lower risk
Juan Issa I’ve tried both ways and there’s no difference in time
А ОЗУ получается не нужно катать? Как без подогрева они сняли проц не «завалив» оперативку?
за эту инфу 1499 просят :)))
I want to enter this course in the sir
OK. Then please fill the application form here: bit.ly/2VDxJ4c.
I thought it was the ram on top, cpu is the bottom layer? Am I wrong?
Please sir upload video about basic method of motherboard tracing how do you know direct where is exactly fault plaese tell me about sir I am half technician of mobile
You don't need to trace the motherboard, just search up a schematic of the iPhone you want to fix. Make a list of the 16 power lines, and then CTRL-F to find which parts of the board you can access them. (And of course, find a ground point as well.) Once you find the part on the schematic, find it again on the PCB layout.
Hope this helps :)
Nice
Gud work
Awesome...
Goog work
Why iphone 7 3d touch not working
Hi.
Van you geve ons in voltage that need to have lik by CPU_SRAM_VAR L1805
And PP_GPU_SRAM VAR.
Thank you a lott
I am one the flower of Rewa
Respect
A10?
I see a reference here...
Hi sir
щас пионеры посмотрят это видео и побегут валить трубки,подумав что все так просто и легко сделать)
For buying a machine so you will help for I contact you
How to bypass iCloud!!!!
Leonard Sylasani you can’t, batter to either part the icloud locked phone you have out or sell it as parts, you can hardware unlock it but it’s super hard and very expensive
Fera!!
Any company’s in uk doing this ?
Got a dead iPhone 6 anybody fancy the challenge of repairing it
Soooooooooppererrrrrrrrrrrrrrrrr
I can't didn't find your number
Master
Show!👏👏👏👏🖒🖒
干得好兄弟！
*c ic ?
I had iPhone 3Gs with same problem, just dead already. Should i reball the cpu ?? 😂😂😂
Try to troubleshoot before reballing CPU.
Rewa👌🏻👍🏻😘
First fr my country
Me watching 2024😂
Hope it can still help you acquire new knowledge.
no.1
I like u
1 unlike by apple employee
Two apple employees now. 😂😂
2nd
H
I dont understand a damn thing!
First!
😘😘😘👌👌👌👌
Unprofessional! No need to break the shield to remove U2 and even tho no need to replace with the new one to see if it’s ok! Just remove it and turn it on if it’s the u2 then the device turns on and enters a loop, anyway you could realize the cpu issue by measuring the feedback line when it’s not connecting to the cpu right then fb line is 4V !
Can you explain a little more this:
"anyway you could realize the cpu issue by measuring the feedback line when it’s not connecting to the cpu right then fb line is 4V !"
Thanks