Dude, thank you! I had a tiny tiny piece of metal in the plunger. Great to be able to fix something with only an Allen wrench and a needle nose. Very helpful to watch someone take things apart ahead of time.
Great video. I borrowed my sister-in-law’s nailer and quickly jammed it up. The manual tells you to remove the front plate but says nothing about looking in the cylinder. Works great now. The only thing that I would add is to watch for the little black spring. I didn’t see it fly out when I opened up the top. Luckily I didn’t lose it.
Awesome video, thank you. My Porter Cable pin nailer is not up to the job, now I got an idea how to git er done. Thanks again for a no BS video, great job!
Great. Mine stopped working just after I hit more than one nail in fast succession but did not look at the time and finished the job with regular hamer and nails. Will look tonight as I'll need the thing again.
Thx. You gave me the motivation to take the cylinder head off and clean out some gunk and maybe a couple bug larvae that were near the top. No idea exactly what the problem was but it's working now.
I'm a stapler from Harbor Freights and the plunger always gets jammed I always need to get a little hammer and Tinker it down to go back in so yes again thanks for the video
Help! I have a new brad gun, worked for a day, now pressuring it up to even 140, it starts hissing air out of the relief on the very back of the cylinder (facing you is you hold it straight out like a gun.) That end has a plastic cap and it can be turned 360 to change the direction of the venting air. It will not stop leaking, and at anything up to 140, it simply will not "fire". Some difficult folks think it is junk and wanna tear it to pieces, I just think it might be something more simple. It likely was a harbor freight.
Maybe lack of lubricant in the cylinder or just a bad machining job. Running it at 140 sounds like trouble. If you bought it at harbor freight you should have 90 days to switch it out no questions asked.
Hi, I have an Airmaster pneumatic hammer for nails and staples that no longer knocks. Air comes out when the button is pressed, but it doesn't beat anymore. SUGGESTIONS?
Thank you! I disassembled it and found a staple that blocked the striker. That's why only air came out and it didn't hit the staples. I greased it and now it's very OK. I dared to open it after watching your movie. I said to myself: WHY NOT ???
Mine works but the problem is when I shoot once n go to shoot again it won't work unless I disconnect the air hose n plug it back again then it shoots n repeat to go shoot again
Sorry for the late reply. Is it well oiled? It sounds like maybe the piston is not returning properly. Could be lack of lubricant. Or debris in the cylinder, or a faulty O-ring. If there's no noticable issue than take it apart. Spray everything down with WD-40 let is soak for about an hour. Reassemble and see if that works. Hope that helps.
![Ryobi P320 Brad Nailer Won't Shoot Nails - Easy DIY Fix [Condensed Step-by-Step]](http://i.ytimg.com/vi/Injca-Bh1NE/mqdefault.jpg)
Grabbed mine out of the trash, took it apart, made sure it was clear, reassembled and now it works. Thanks.
Right on!
Dude, thank you! I had a tiny tiny piece of metal in the plunger. Great to be able to fix something with only an Allen wrench and a needle nose. Very helpful to watch someone take things apart ahead of time.
Thanks. Took mine apart, cleaned and relubed. Works great!
I have just fixed my nail gun that misfired thanks to this video. Turns out that a a piece of a broken nail was jamming up the gun. Big thanks !
Great video. I borrowed my sister-in-law’s nailer and quickly jammed it up. The manual tells you to remove the front plate but says nothing about looking in the cylinder. Works great now. The only thing that I would add is to watch for the little black spring. I didn’t see it fly out when I opened up the top. Luckily I didn’t lose it.
Thanks for that! It was easier to disassemble than I feared. Mine was gummed up with oil that had solidified like hard beeswax.... now like new!
my o ring was out of of track, pushed back and voila working again, thanks my dude!!
Watched video. Pulled mine apart. Lubed and reassembled. works great now. Thanks! Much appreciated.
Awesome video, thank you. My Porter Cable pin nailer is not up to the job, now I got an idea how to git er done. Thanks again for a no BS video, great job!
Great. Mine stopped working just after I hit more than one nail in fast succession but did not look at the time and finished the job with regular hamer and nails. Will look tonight as I'll need the thing again.
Great video..
All most thru my nailer in the trash..
My plunger was stuck..
Now works like a charm...
Thx. You gave me the motivation to take the cylinder head off and clean out some gunk and maybe a couple bug larvae that were near the top. No idea exactly what the problem was but it's working now.
fixed my cheap Menards gun in 15 minutes after watching. Thx !
Awesome, excellent video. My pin nailer has been fixed!
Took mine apart. Put it back together and it chooches just fine now. Thanks!
I have a brand new numax..never fired from first time trying. I'll try your process. Hope it helps. Thanks. Good vid for newbies.
Thanks for posting this helpful video!
Thank you for for taking your time to make this video! It was GREATLY Appreciated! Problem Solved!
Thank you for watching!
Ty I am pulling my 18 ha craftsman apart tomorrow 😁
Thank you so much , it was a bent nail. works great !
Glad it helped!
Nice vid, helped me know what to expect, now i'm goin in my fairly new Central pneumatic nailer too.
Very helpful. Thanks for posting. 👍
I'm a stapler from Harbor Freights and the plunger always gets jammed I always need to get a little hammer and Tinker it down to go back in so yes again thanks for the video
Thank you so much for this video!!
Thank you for the lesson you just got me out of a tight spot
Thanks brother. Saved me on a job site. 😍
Glad to hear it
Great video, thanks!
Great video - thanks for posting
Thank you, this video helped me!
Thanks really helpful, gives me the confidence to open mine up, to look for the problem
Fixed my HUSKY nail gun by following the video. Thank you!
Great video, I'm back in businesss!
Thank you boss 🙏
awesome thanks , need to try to fix mine
Excellent
thanks man for camera and repair
Great fix.
Appreciate the video. Such a simple fix! Was worried I'd have to buy a new gun lol
I like your style!
Very helpful ! This for sharing
Help! I have a new brad gun, worked for a day, now pressuring it up to even 140, it starts hissing air out of the relief on the very back of the cylinder (facing you is you hold it straight out like a gun.) That end has a plastic cap and it can be turned 360 to change the direction of the venting air. It will not stop leaking, and at anything up to 140, it simply will not "fire". Some difficult folks think it is junk and wanna tear it to pieces, I just think it might be something more simple. It likely was a harbor freight.
Maybe lack of lubricant in the cylinder or just a bad machining job. Running it at 140 sounds like trouble. If you bought it at harbor freight you should have 90 days to switch it out no questions asked.
Thanks man - I also fixed mine
thanks sir
Hi,
I have an Airmaster pneumatic hammer for nails and staples that no longer knocks. Air comes out when the button is pressed, but it doesn't beat anymore. SUGGESTIONS?
Hard to say without looking at it but my first recourse is always to disassemble it, clean it, and look for anything broken or corrosion.
Thank you!
I disassembled it and found a staple that blocked the striker. That's why only air came out and it didn't hit the staples. I greased it and now it's very OK. I dared to open it after watching your movie.
I said to myself: WHY NOT ???
Glad it worked!
Nice job👍👍👍👍
Thanks for video
Thank you!!
Thanks !
I just bought one hun!
DeWalt brad nailers
I have the same problem. Do you think I can try to take all apart with my Dewalt brad nailer?
Yes they are made to be serviced and most of them work similarly.
@@CNTHINGS Thank you!
Do u think this is typical with most air nail guns 16/ 18 gauge?
It's very common on the small gauge nail guns. Also guns not being oiled can make them misfire and jam.
Nice job!!! Thank you!!
Thank you.
Mine works but the problem is when I shoot once n go to shoot again it won't work unless I disconnect the air hose n plug it back again then it shoots n repeat to go shoot again
Any advice to fix my problem
Sorry for the late reply. Is it well oiled? It sounds like maybe the piston is not returning properly. Could be lack of lubricant. Or debris in the cylinder, or a faulty O-ring. If there's no noticable issue than take it apart. Spray everything down with WD-40 let is soak for about an hour. Reassemble and see if that works. Hope that helps.
Thanks
2:39 ……let see if she chooches😂😂😂😂
Skookum!
AvE!! lol
My one blows air from the back
Maybe the back seal is cracked somewhere.
What is "chooches"? Lol... you said "lets pull the nail out, put it back together and see if it chooches"???
Chooches: When something works the way you want it to. Check out AvE channel for more funny words.
@@CNTHINGS here is my addition to Chooching
ua-cam.com/video/YSFbKti0HY4/v-deo.html
@@ComedianJoelCooper Haha! Hilarious 😂
@Derrick Smiley which spring are you referring to?
Thank you
Thanks