9 Easy and Profitable laser engraving products that SELL!!!
Вставка
- Опубліковано 9 чер 2024
- #lasercutting #laserengraving #laser #lasercuttingmachine #business #money #wallet #leather #leathercraft #bespoke #handmade #woodworking #woodwork #woodworking
This video is about starting a laser engraving business in 2024. I cover what products are popular and what I would sell.
GET CREALITY 40W FALCON 2 HERE: s.zbanx.com/r/x8t4In4ujOUt
GET CREALITY 22W FALCON 2 HERE: s.zbanx.com/r/oGG9ICnYDzFm
JESPERMAKES LINK: jespermakes.com/shop/f5150ab7... - Розваги
He my teacher
Great video keep up the good work
nice wallets
The sponsor gotta be happy with this! That is a great lineup of goodies Dan... but yeah... don't use the expensive leather first 🤣
Yeah mate very happy. As a result I have a new laser on the way!
Keep up the great content mate. Grateful viewers over here in New Zealand.
Mate thanks for your kind words. So happy you liked the video! It’s comments like this that make my week!
Very well put together video, and thank you for the tips!
Cool projects! I think the birdhouse is more like a doll house though?
Crickey. That is heaps of cool products Danny boi. Keen on a wallet 💪
Would be happy to make you one. Are you a slim wallet kind of guy? Or do you need space for every loyalty card you have ever owned... kind of guy? haha
Great video! Thank you for making it, there were some very important things I learned,especially with the leather wallets
Thanks for commenting. Glad it was helpful!
Really slick video Dan.
Well done on that subs count. Glad it’s going well pal. 👍
Thank you mate. As always I appreciate your support.
Have yet to do a mirror, thanks for the reminder! Good work!
great ideas.. great video. thank you for sharing.
Thank you very much for your kind words. Yeah I had a lot of fun with this one.
Good job Dan. I have a laser from the opposition and so far it has done a great job. They really do add another bow to the maker's armoury. Keep up the good work. All the best.
For sure mate. Any laser will get the job done. Cheers mate
kids + paint + craft project = winner 👍
Yeah mate with that one the possibilities are endless. I also really like the idea of just preparing them flat packed. Easy storage and easy postage.
Glad I came across your channel! I'll be going back and watching more videos. What was the black stuff you painted on the glasses?
Hi there,
Thank you for commenting. Just regular water based black paint. There are etching sprays which are really expensive but all you need is something to help the material absorb the light source.
Great ideas in the video mate
Cheers mate. Yeah really trying to think of products that aren't being sold by everyone else haha
Very cool video. I am going to check out the leather stuff with my laser
Yeah mate, my guess is that you will prefer it over cutting 3mm ply haha
@@riversidewoodworks 😂😂😂 sure thing thinking of maybe building a keepsake box with leather inlay. Sparked my creativity
Needs to be Veg tanned leather for lasering. Otherwise it will release toxic fumes.
5:14 the fly is enjoying the laser light show on the Y rail in bottom right screen! 😅
Haha you’re right. Not sure if that fly can see properly anymore
@@riversidewoodworks I mean, they have really short lifespans and are usually a nuisance, so it'll be alright.
It has an interesting story at least, 🤣
what did you apply to the glasses before engraving? I haven't seen that done before (still new so that doesn't mean a lot lol)
Hi just found you on UA-cam, great video on the products. I recently bought a Falcon 2 40w with the rotary attachment not used it yet, I’m still trying to work out the settings for the rotary part in Lightburn as don’t fully understand the manual that came with it. could I ask or a screen shot of your setting or a video on setting it up it would be a great help. thanks Paul
Hi there, more than happy to help. If you message me through Instagram I can send you through some pics etc
Great video, thanks
Would be keen to know your 22w settings for each item.
I'm going to buy a tumbler rig now I've seen your video
That's great to hear. Settings for the tumblers were 2600mm/min and 10% power.
Great video and ideals, what were the settings you used for the mirror ( PWR/ SPD / Offset fill, line or fill/ Lines per inch)i have the falcon 22 watt creality learnig . thank you
Hi there,
Thank you for commenting. Settings were Fill. 250 mm/second (not per minute) and 100% power. Apologies for not responding sooner!
Great video What fume extractor would you recommend for creality 22w ?
Hey thanks for commenting. If you can hold off for a couple of months Creality will be releasing their fume extractor. I’ll be doing a video with it but again it’s probably a month and a half a way. Sorry I couldn’t be more helpful
whats good heybhey
A couple of questions:
Where would you recommend getting laser engravable tumblers?
How would you calculate how much to charge for engraving?
Great video! Thanks for sharing 👍 😊
Hi there,
Thanks for commenting. To start off with I would just go to the big box stores etc. I have really tried to avoid engraving YETIs/Stanley Cups because if you make a mistake with the engraving you are on the hook to replace it and they aren't cheap.
How much do I charge depends on the set up of the job and the engraving time. The 40W laser helped speed up the process for me but the time is in the set up, especially if there are multiple layers. Each part of the world is different but my strategy is to charge a set rate for every 6 square inches so they know that there is a minimum charge. If they say they can get it cheaper elsewhere, I am more than happy for them to go elsewhere.
What type of material does it engrave beside glass, leather and wood? Can it engrave electronic devices?
I am not sure about electronic devices. I would be keen as I would love to engrave the back of my iPhone, but not game to try it. Creality have a 1.6W laser which comes with their 40W laser now so maybe the ultra precise laser would be good for that.
Where do I get blueprints for those wallets
Hey thanks for commenting. I got them off Etsy. If you message me on instagram I can send you the link
How was the leather stink? Lots of good fun.
That's a good question. Not as much as you would think. Because it's waaaaay easier to cut leather than 3mm ply, the laser is actually cutting for far less time so I prefer it to cutting wood which produces much more smoke.
If you want to make good profits run your speed up. On powder coated tumblers I run 10500 mm/min and 85% power on my 20w diode. Can do a standard 75x75mm logo in 5-6 min. I have 2 machines running at once and can easily make over $100/hr profit. Tough to make profits at 2500 mm/min doing any project for sale.
Wow that is quick. I will give that a go!
Is there a file for sale for the wallet cutout?
Hi there, file was bought off Etsy. If you message me on instagram I can send you the link. Thanks
8:10
WOW! This part kinda tripped me out a bit...
My brother's name is Rhys, his girlfriend's name is Anna and they they live beside the Burnett River in Bundaberg.
The 3 cups you showed said "Rhys", "Anna" and "Riverside (woodworks)"
Too much coincidence in one short span of a totally random video!
That is funny as I made these for a guy named Rhys and his girlfriend named Anna. They are in Brisbane.
@@riversidewoodworks In Bundy or Brisbane mate?
@user-lu2vt8cv3m yeah definitely Brisbane.
@@riversidewoodworks Well... That's one hell of a coincidence then!
hey heyhey
Its Oscar
hey hey
hey yo
Bala Taylor
Hi Aston
yo yo yo
hello
MR TAYLOR
whats up
yo yo
Doesn't sound like you've actually been selling these items as of the making of this video. Are you basing these recommendations on first hand experience or your best guess?
Hi there,
Thanks for commenting. Also apologies for the late reply. I have sold almost all of the products in this video now and in the past. The only exception is the etched drinking glasses. Haven't found a customer base for those but I just know they are out there. Thank you.
@riversidewoodworks Hey thanks for responding to my question! Reading it now the tone was a bit more aggressive than intended, which makes me appreciate the response all the more. Happy making!
No worries mate. Appreciate the support!
I’m still trying to work out how to share prices on UA-cam since everywhere is different. In Australia things are pretty expensive due to our high minimum wage ($23.23 an hour which I believe is the 3rd highest in the world). So Americans can’t believe it with I share prices and say “no one would pay that much” etc.
I can’t believe I’m sending a UA-camr money 😂
Thank you!!!
You need to buy yourself some saddlers clams and wax to make your life easier and your final finish better.