How to Make a WASHING MACHINE using Buckets (12V Portable)
Вставка
- Опубліковано 16 лип 2016
- This is a really awesome washing machine, can be easily made at home. It is a good machine for all students who live in hostels to wash their shirts and socks. Enjoy!
- Навчання та стиль
Just a suggestion. Get 5 or 10 one inch rubber bouncy balls. To the inside edges of the washing bucket, glue a half of a rubber ball, the kind you get a toy stores, on various places to create a washboard effect as the clothes are circling around the bucket. This will create the agitation needed to knock the dirt out and push the soap and water through the clothing.
Also, for a drain, drill a slightly smaller hole than 1" approximately 1/2" from the bottom of the top bucket. Insert a male threaded pvc pipe into the hole from the outside. Place a washer onto the threaded end from the inside and use a pvc nut to secure the pipe to the bucket. Use a pvc cap to prevent the water from leaking out while using the washer and remove when emptying. If you want to make the pipe longer, you can either add more pvc pipe or add a hose to the end to run to a drain.
Ti Phillips 3e
K3m
Ti Phillips your talent his talent you start a business together I buy
Invertor technology what is?
Beautiful suggestions sir very beautiful
This is absolutely brilliant on DIY standard and first time attempt, lots of feedbacks are being poured by youtubers for may be improvement they want to see on next iterattion. let me add mine too, well i think the washing cycle will be more effective if it has some contours on the sides of upper bucket may be you could do this with the aid of some sort of heating element. Good job anyway!
+Knight Rider thank you so much!
The advantage in these kind of Bucket washing machines is they will consume less water. And nice to use for washing baby clothes. 👌
thanks for the video, my grandma needs some washing machine
like the build and i want to do it but how hard would it be to add two way agitation , auto fill, rinse, and drain? and what music did you use in this video?
Washing machine from bucket. Is it practically possible with 12 v battery. Technical idea is worth praise.
How about adding 3 fins on the sides the a better wash? I have a GE front loader that uses 3 fins. Even my grandkids dirty football uniforms come out clean everytime.
Fascinating!
bisa aja tuh orang bikin maenan ,,, good job man ,,,
did you not use any seal at all around the axel plate? i mean the water should drip by the bolts and axelhole just fine with just a tiny hole?
You can make an H-bridge out of power transistors and diodes, to alternate the direction of current, the motor then rotates back and forth and it pretty much resemble the commercial washing machine. Great vid though!
+Panos Chao thnx
This would probably clean better if it reversed direction every 20 seconds or so - better agitation.
Awesome, I want to do this! (or buy one)
Very good project! I´m going to imrpove this with a drain hose, but I really like the original idea.
Also is it possible to replace the buckets with a plastic gallon drump to add more clothes?
for some reason this is so satisfying.......
Que legal! Pena que não entendo de mecânica se não iria fazer uma máquina de lavar igual essa para mim! Parabéns! Você é muito inteligente!
Comment 5
This is the best damn project so far. I believe some simple improvements can be done with that model, like adding a drainage pipe etc. I also think you'll need a more powerful motor.
Anyway, I'm willing to try this project if I could find the parts.
wow
can you build a mini-dischwacher??? I want to create one, and I have some ideas about it, but 2 heads is better than one, especially when 1 of this 2 is yours! Shall we think together about it?
Could you please list the parts you used thanks
simple at finnest, good job
This is a great project, but I am unable to find an appropriate sized pulsator. All I can find are over 12" diameter which does not fit the common 5 Gallon bucket. I believe that pulsators sold separately are much more common in India, which unfortunately does not export most items like this to the West.
should have only put the glue on the smallest circular piece of wood. The way you did it glue bonked out where it didn't belong. Also it's a DC motor, so you could have set it up to reverse directions between cycles for more agitation.
Good point. So there should be a locking pin.
kedwa30
Kenneth Scharf p
Kenneth Scharf wwwWA AZ
H
What do you use the gear box and pulsator from the washing machine?
All third world country homes now can have this III world washing machine! Very nice .
This is impressive; thank you.
I know there's seemingly nothing getting agitated but I think he intended for this to be a prototype.
Thank you Mr Silent
nice but need it moves right left
but I not sure if this will work with DC
PS .. I just saw a review on a portable washer/spinner called the base camp washer. It has the internal basket that attaches to the agitator. It'd be totally worth trying to incorporate this into your design as clothes that havent been spun dry take so much longer to dry. Depending on weather conditions where you are camping this could be a real pain.
จีน
😊😊😊😊
😊😊😊😊
😊
😊😊😊😊😊😊😊😊
your motor must go clockwise and counterclockwise but your relay connection only shows on and off in one direction/ perhaps you need to change the schematic to allow for the correct rotation?
very good project!!! 👍
Impressive... Now let's see a front loading one!
this stuff is great
Muy chido invento deverias ser ingeniero felicidades
So, what about the rinse cycle and spin cycle to get the excess water out of the clothes?
regards sir.
what is the wattage of the DC motor i.e. how much ampere does it draw from the battery.
It would be so cool if you can make a front loading washing machine
It would be nice if you can make the module for the motor can rotate reversely.
Yar bohat khoob maza aa gaya dekh kar
+Fakhir Ibrar thnx
Not basic enough in my opinion. The base & agitator needs to be more homemade. Great video.
Fabulous !!
For mine, i used bigger buckets and I added a drain plug and a even bigger motor which is 28V power and added a PCB Board to make it spin another way around, for agitation I put brushes.
what is the specification of the motor you used?? how much rpm? how much torque? and where can i get a pulstor in india?
put a weight below to hold the system in movement and a transparent lid for the water not to get out and also to see the process. Success ! from Romania
sir ap batae ge kon si battery achi hai 12 v dry long battery ya leoch battery ?
you're a smart guy I was wondering why didn't you use a mini shipping Barrel the plastic ones and on the other side where the motor and everything is did you use some kind of sealant so the water doesn't go through
He did not seal it. The tightness of the connection on the two plastic buckets keeps the seal. You can seal it if that is your preference. Silicone caulk is a good choice.
Good video, but the design of the washing machine could be improved. If possible, design the circuit to reverse then forward for more agitation and less swirl. Thumbs up!
After thinking about it, this way is probably better than what I had in mind. Good job!
+kedwa30 thnx
just reverse the polarity of the motor :)
or if he uses a squared container so the clothes smash against the walls
you should get a better pulsator so it can better clean the clothes, also you should put electrical tape and protect the battery to prevent fire.
That is a great whirlpool maker.
wonderful idea
Gostaria que ela fosse manual,ia ser muito bom,para economizar energia. Gostei da velocidade que ela tem. Já é duas máquinas que assisto e achei o máximo, da para fazer uma igualzinha manual ou como pedal,tipo aquele balde que aperta em baixo com o pé e a tampa lavanda, da para colocá-lã assim?
Comment 4
Bro thanks ❤️
EXCELLENT IDEA
what is the power of dc motor i mean can it swing one or say 3 denim pents and from the look of it, it appears to be very fragile and susceptible to leaking washing a handkerchief, socks or under garments is not privy to that much trouble
great work
I love love love love that you don't feel the need to talk.
Chad pop
Chad kkkhhh
how to prevent the water leak from the upper bucket to the lower one?
really super idea bro
Could you DIY an egg washer? Preferably with 3d prints etc? :D
Were can I buy the parts to make the washing machine work with battery?
Where did you get the wash plate
Cost for parts?? and where did you get the parts??
Can the pulsator base be made too?
It needs to go back and forth - clockwise then anticlockwise or else you'll end up with a bucket full of really tangled items and they won't clean very well either.
also..when you put too much water, he upper bucket would be too much heav that the bucket below can no longer stand, which will cause the whole thing to tip on its side..
Oh my god awesome 🙆
Greate video yr Thenks
Aww, well done I love it! :) cheers!
+Leslie Lucero thanks!
+Easy HomeMade Projects you're very welcome.
frozen
It would be cool to make this in a rectangular tub with two agitators spinning opposing directions. I may do that some day.
Use a relay with a basic Arduino board so you can make the same thing spin opposite after some intervals of time.
Could you use 5 gallon buckets?
Where do I get the pulsator from the video?
Awesome video but I have one question, can there be like a drain pipe to it just to make it easier?
You can drill a little hole in the bottom and then remove the top part of a bottle and stick it onto the bottom.(make sure that it has a cap otherwise the water will just flow down)
we're do you get the parts from
It's really cool, but can that clean at least 1 heavy large blanket ?
Nice project
Wow excellent 👍👍👍
Hi bhai aandar jo palet lagaye hai wo kaha milti hai
There is a reason washing machine agitators change direction. It's so the water pushes through the clothes. If the water and clothes are spinning in the same direction its gonna be very inefficient. Surely this could be done electronically. Close but no cigar on this design. It would also be quite easy to have a basket that attaches to the agitator to spin clothes or just a lock to make the motor spin the whole bucket and a plug in the bottom. Nice first try though. Keep at it ;)
No want to added
Where do you get the silver plat ?
The actual use was not shown, but I can predict that it will not work. The end result will be a tangle of clothes as a result of the action working in only one direction. It needs to reverse direction frequently or to churn up and down.
Great Job
excuse me, may i know where u buy all of that materials?
Suggestion: Now Let’s see a Front loading one!
Very beautiful and thought more fascinating project and we are waiting to upgrade this project
Where did you get the pulsator?
I need to make a Control board for this thing to control the speed I forget that this should be 1020 hp.
Pani jo dala wo likej ho ke niche motor me jata he likege band karne ka upai ki lekin likej hotahi hen baber packing bhi rakha msil lqgaya firbhi band nahi hotahe. Please advice.
6" Washing Machine Pulsator Base
A kaha se liya hai aap ne
What is the water sealer ?
wow u are a genius
you should put the reverse polarity so that it will spin clockwise and counter clockwise.
It is one of the practical
Chhote hi dhoyenge or base clothes??
What If you put a little rack in the bottom and put dishes in there ?
Where do I get the Moto and parts? Please help
i just wanted to know where can i find that pulsator base, i have been searching for this and couldn't find online or in shops.... please help me out.... if anyone has that do contact me here....
I thought to share that i made a mineature washer its topload direct drive and has a pump that i found lying in the wheels of a 3d printer which sucks out water and fills it in on my command
Don't you want to silicone the bottom plate?
Can someone help me out finding out the pulsator base and pulsator!! it would be greatful...!!