I had Blackbear tune my 05 6.0 suburban and was extremely happy with it. The trans shifting made it a pleasure to drive. Also the 10 speed in the new trucks is so good stock, it reminds me of that tuned one.
Nice video series on your upgrades and tuning. I agree. Your truck sounds and runs nice! Edit - Love the fact tuning company wants a datalog after the tune.
Sounds like my nephew's 99 5.3. He went to some shop and they put a personal tune on it. Wish I knew the HP but that 99 5.3 is no joke! Would you be interested in doing a dino to see how much you did gain from the factory HP?
I have the live Blackbear tune with Justin. 06 sierra 5.3 tuned for 91+ octane and cold air induction. Haven't had another truck to run with me yet also many sport car's. This truck is fast very happy with my second retune.. Thanks again Justin!
If I had to make a guess, i think that’s what he’s adding to the trans. Corvette servos do wonders, I also add a washer on the pin spring, that’s under the cap.
Holy shit that thing flys, put some all terrains an not mudders would be faster an better traction on the road , or with the mudders do a floor board shot in the dirt lol
Put a corvette servo in my '07 classic 4L60e and after a Diablo tune I pulled and that sucker SLAMMED into 2nd then SLAMMED into 3rd. I had to check out the rearview to make sure no parts were sitting on the road. Gonna reinstall the origional servo. I love my Trucky Truck and damaging it would hurt my soul.
If/when you sell this thing I will drive my happy butt to Alabama to get it. For the life of me I cannot find one that is half decent that has what I’m looking for
I don’t want to be that guy but I’ve been watching for a while and I love the roundbody gmc but with the mud grapps look I think you should get a go light they add a whole new look and they are fun to play with
I have a 2006 chevrolet tahoe Z71. It's stock and in incredible condition. Would it be good to get a tune on it. What's your suggestion. Idk nothing about this kind of stuff.
Consider going to a reputable performance shop that regularly does tuning with HP Tuners. A tune alone is great, but if you later decide to change intake, exhaust, do headers, etc... you'll have to retune. So I'd consider getting some longtube headers and tune if you want some more gains without the truck being too loud (it'll sound good and healthy).
Hey I just found your channel and I’m really impressed with what you’re doing. I have a 2016 Chevy LT short bed, reg. cab and I haven’t done anything to it. I was thinking about starting with that C.A.I. that you used. Do you have any advice for me if I wanted to tune my truck like you’ve been doing to yours?
@@gsanchez5593 not going to make a difference either. He probably plans to do a few motor mods eventually. Just a reliable transmission to definitely hold power and the bigger tires
If it’s bouncing between 40-55 on a 99-07 classic it’s frame beaming. The rear cab mounts go bad and cause it. A smaller tire sidewall makes it more noticeable. This is of course assuming your tires are properly balanced and no driveline vibrations
Skip the intake do a drop in filter if will do the same as a full cai if you want big difference a aftermarket converter will make it feel fast and keep that 6l80e alive longer since the stock converter fails commonly. If you want power a cam, nitrous, boost will give you the biggest bump honestly if you want something fast skip straight to boost.
Check u out clearing codes solo hehehe i kid because i appreciate. 👍🏽🤛🏽, Im still hunting for my version of this Gen truck based on your vids, good stuff.
Where are you and what octane are you buying if you don’t mind? 😅 it was about $6 for me but it’s been going down the past 2 weeks and it’s about $5.09
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Please consider the truck Norris cam, it’s great for stock stalls, adds torque through the entire power curve, has a little bit of baby chop
Yep my buddy has that one on his 5.3. It’s nasty man
The tsp chopacabra is just as good too and a bit cheaper has a more aggressive lope to
How got is it on mpg
I know this is old but how far do you have to go with the internals of you put this cam in?
@@BNJITOKESI would do valve springs and lifters at least just depends how healthy ur motor is
Don't ever sell Chomper this truck is a beast!
I had Blackbear tune my 05 6.0 suburban and was extremely happy with it. The trans shifting made it a pleasure to drive. Also the 10 speed in the new trucks is so good stock, it reminds me of that tuned one.
Justin @ Blackbear is the best, most knowledgeable tuner I've ever met...
Chomper looks fabulous but would really change it up is a cowl hood👀👀
Nice video series on your upgrades and tuning. I agree. Your truck sounds and runs nice! Edit - Love the fact tuning company wants a datalog after the tune.
Sounds like my nephew's 99 5.3. He went to some shop and they put a personal tune on it. Wish I knew the HP but that 99 5.3 is no joke! Would you be interested in doing a dino to see how much you did gain from the factory HP?
Bro why you always see weird things when you’re driving filming a video 😂😂😂 the world is crazier every day
I know this is a long shot but I really want you to put a fat magnuson supercharger on chomper
I have the live Blackbear tune with Justin. 06 sierra 5.3 tuned for 91+ octane and cold air induction. Haven't had another truck to run with me yet also many sport car's. This truck is fast very happy with my second retune.. Thanks again Justin!
Also the corvette 2nd gear servo
My gosh those tires are LOUD rolling down the street
Texas speed 224r cam kit is in my setup.also Btr stg 4 kit is good one for cam only trucks.they also has nsr kits for small cams
Chomper has officially taken over baby squat for most Badass truck on the channel
IT SOUNDS SO AGGRESSIVE! I LOVE IT!
love to watch all the vids!
Man it sounds GOOD!
Corvette servo and accumulator spring would help that 1-2 shift
If I had to make a guess, i think that’s what he’s adding to the trans. Corvette servos do wonders, I also add a washer on the pin spring, that’s under the cap.
It would be interesting to see how it could tow a nice sized camping trailer with the tune
Holy shit that thing flys, put some all terrains an not mudders would be faster an better traction on the road , or with the mudders do a floor board shot in the dirt lol
Put a corvette servo in my '07 classic 4L60e and after a Diablo tune I pulled and that sucker SLAMMED into 2nd then SLAMMED into 3rd. I had to check out the rearview to make sure no parts were sitting on the road. Gonna reinstall the origional servo. I love my Trucky Truck and damaging it would hurt my soul.
Nice clean truck
Just to be precautionary it would be a good idea to change the trans oil and filter just to be safe new oil will keep it happy for longer
One thing you should do is black out the gmc badge on the front other than that the the truck is sick
Love the videos
You should do something like this to larry
Haven’t seen old Larry bear 😐
If/when you sell this thing I will drive my happy butt to Alabama to get it. For the life of me I cannot find one that is half decent that has what I’m looking for
I don’t want to be that guy but I’ve been watching for a while and I love the roundbody gmc but with the mud grapps look I think you should get a go light they add a whole new look and they are fun to play with
From a dig you spider gear is gonna go before trans.
I got a 2018 Z71 5.3, i hate the shifting. Does this tune void warranties?
Keep up the good work 👍.
I have a 2006 chevrolet tahoe Z71. It's stock and in incredible condition. Would it be good to get a tune on it. What's your suggestion. Idk nothing about this kind of stuff.
Same 😂
Consider going to a reputable performance shop that regularly does tuning with HP Tuners.
A tune alone is great, but if you later decide to change intake, exhaust, do headers, etc... you'll have to retune.
So I'd consider getting some longtube headers and tune if you want some more gains without the truck being too loud (it'll sound good and healthy).
Hey I just found your channel and I’m really impressed with what you’re doing. I have a
2016 Chevy LT short bed, reg. cab and I haven’t done anything to it. I was thinking about starting with that C.A.I. that you used. Do you have any advice for me if I wanted to tune my truck like you’ve been doing to yours?
Would have liked to see how fast the odometer is going up
Hey bro you need to get your throttle body ported it helps a lot on this trucks
It sounds fantastic man 🍺🍺
It sounds very similar to your old ‘18 Silverado…. Sounds incredible!
Now, the CAM!!… 😈
I literally saw you pass me on the miss/alabama state line..
Your truck sounds like a race car you should drag race someone in that truck so sick
What kind of exhaust are you running?
4l60s I think handle digs better than stomping on it from a roll
Yes a 60 roll destroys them
Agreed, always losing 2nd/3rd… all of them still have 1st.
@@bigf1502 it’s the 1-2 WOT shift that destroys them.
The first gear is really short good for digs if the trans is stock 1-2-3 rpm drop is huge.
My 01 bounces in the rear at 40mph…. Cannot figure it out for the life of me. Is that what your does?
Adding corvette servo? 1-2 shift gonna bite 😂 might end up needing a trans after that but 4l80e swap it and never look back
You loose power with that 4l80e just with the mods he has
@@gsanchez5593 not going to make a difference either. He probably plans to do a few motor mods eventually. Just a reliable transmission to definitely hold power and the bigger tires
Th400 and call it done.
Your bouncing at 40 mph bc your having axle wrap/ wheel hop bc of the lift block, i have the same truck and lift and it happens to me too
Traction bars would help no ?
@@damiansalinas9887 yes they would, but i also plan on getting full leaf replacements for the 6in lift im getting
Mine as well! Right at 40mph. I want it gone!!
It’s actually frame beaming. Lift block size doesn’t effect it on these trucks. It’s the rear cab mounts
Please do something like this to larry
Your front shocks may be bad. Unless you have not rotated the tires for more then 5Kmiles.
Just out of curiosity, I’d love to know what you do for a living or what type of field you work in to be able to afford these amazing builds.
I always wonder that
@@danielrudder7239 I wanna work where he does LOL
How does it compare to the other trucks in the fleet (speed wise)
Your my hero
Corvette servo coming 🔜🫡
When you gonna cam it?
How can I get this tune for my truck? And what size tires are you running
Call BlackBear !
When you figure out why you were bouncing , id love a video on that. im dealing with that and cant track it down.
Same!
If it’s bouncing between 40-55 on a 99-07 classic it’s frame beaming. The rear cab mounts go bad and cause it. A smaller tire sidewall makes it more noticeable. This is of course assuming your tires are properly balanced and no driveline vibrations
@@jacobn3160 Ive read this online many times but my mounts look just fine
Still waiting on Escalade door handles 🔥🔥
Chrome ones? 🤢
@@maxtrigga9952 all other accents are chrome…what’s the big deal
Good morning... can you show me on video how to fold the rear seats of your truck... I have the same one and I can't fold them...thanks
Nice truck i got a few questions i got an 11 stock gmc sierra denali 6.2 whats the first thing i can do to make it a faster?
Skip the intake do a drop in filter if will do the same as a full cai if you want big difference a aftermarket converter will make it feel fast and keep that 6l80e alive longer since the stock converter fails commonly. If you want power a cam, nitrous, boost will give you the biggest bump honestly if you want something fast skip straight to boost.
If you just want something simple tune goes a long way.
Whay kind of tune can remove cat codes, mine are deleted. First chevy so idk much
Bro the price of premium in your state is the price of reg in my state
Who did you get your blackbear tune
So hey what lift do you have as well as tires?
what tuner/scanner are you usen for you truck ?
let’s goooo
What rear axle do you have?
Check u out clearing codes solo hehehe i kid because i appreciate. 👍🏽🤛🏽, Im still hunting for my version of this Gen truck based on your vids, good stuff.
"Because 4l60 life" felt that one lmfao I gotta 2000 5.3 n the tranny ain't top tear that's fs
Are you going to do a aftermarket grille on chopper
How do you get the info to send to blackbear
How many miles on the truck
What scan tool is that?
You ever figure out that bouncing thing at 40??
I just put new cats on an 05. Damm it.
Do you have to have a computer for it
Ever consider selling? Beautiful truck.
How much was the tunes?
You should raffle off Chomper when u want to part ways with it
Corvette servo?
So nothing special is required to go 93 tune?
Time to cam it
Link to the cluster ? In chomper
Please take those big wheels off and put some draggys
Were can i get that carpet
Not sure if its a carpet but pls
Race the old vs new GMC
You should get a bluetooth microphone
Early asf
First
Tires look feather.
4.39 hurts???? Bro I’m at $7 driving my f150 on 33’s 🤣
Where are you and what octane are you buying if you don’t mind? 😅 it was about $6 for me but it’s been going down the past 2 weeks and it’s about $5.09
It’s still $4.50 for 87 in pa🥲🥲
$3.29 here in middle TN