I am very impressed by your desire to retrofit things...I would say I have the same virus in me...which is great !!! things turned out very well !!! congratulations... and go on. you are in the right direction!!!
Congratulations for the job. I did the same retrofit on my F30 2013. Plugging the HUD is the simple part of the job. The more complicated part is to remove all parts from shift parts to dashboard. It's a hard work takes long time... Again congratulations 👍
hi man can i know some details about the retrofit? i also have a f30 wants to do the retrofit and did you cut a hole on your dash? I also bought a second hand rain solar sensor but don't know where to buy the gel to stick on the windscreen
Hey! So no I didn’t cut the dashboard. If you look at the other video about the change color you’ll see why… it’s doable, but I don’t like to do things that way… check it out. The silicon thing part number is 61 35 9 856 157 I got it through ecstunning but if you are in Europe you can get it through schmiedmann. Hopefully one day they will show me love the way I show them love Hahahah… sponsor requiered. Also don’t forget to change the windshield
@@DorksandBolts hi thx for reply, I don’t have enough budget to change the whole dashboard and windscreen. Even has double vision I am still gonna use it. I bought a rhd hud from China for only 90 dollars, just try to find all the other harness bolt and rain sensor also the air duck.
Well I disconnect the battery most of the time so the camera is unaffected. But yes good point. It does need to be calibrated. Since this was a full retrofit I am used to do that on a regular basis now 😂
Do you have any advice for some starting out whit retrofit? Any programs things of that nature. Also very nice you did an amazing job keep up the good work I will stay tuning in for the next up date!
Hi Terrance, that’s a little tough to say. But I would say that it starts by deciding if some feature is something that you really want and can somehow help you enjoy your experience with your car. So it’s a little bit different for each person. Before jumping into any programs for coding, I would suggest really reading up on how your car systems work and what do you need to achieve the retrofit you are after, because these cara are very easy to break if you don’t know what you are doing. That said, if you have more questions, I wouldn’t mind helping you figure things out.
Nice job.a verry rare video with retrofit coding.i just wanna ask you did you used a battery charge or something like that during the coding.ot just keep the engine on.and if you know does my 530xd 02 2012 foes support nbt nbt evo retrofit? 🤔.thx and waiting for more coding and retrovideos
Yes always use a battery auxiliary power to keep it over 14.4v no matter what you do. It might sound overkill for even simple codings, but better be safe than sorry
Great video! I have an f36 2015, if i retrofit hud from a junkyard what coding do i need to do to get it functioning? Or is it the same coding as you did in this video?
Yeah it does need a different dash, check out the other videos where I explain how to change it, and even change the color of the dash. As I say on that video there are people that cut the dash, but I prefer not to do it.
Hello, I congratulate you for your work, I will be glad if you help with something. I have a 2014 model BMW f30 vehicle I have installed 2 cameras in my vehicle, but it gives a calibration error, but the high-beam assistant comes on, lane tracking enters but does not read the speed signs, it does not reflect on the screen, so I think it gives the caliber error, what should I do. thank you in advance
Hi! Great video. I’ll be doing the same on my f15. I have a dashboard and a display already. It looks like I have to change that rain sensor too. Could you please let me know if the HUD cable was in the car or you had to run it? I am just not sure if my car has it or I have to get it and install it.
Hi, glad you like the video! The cable was not there, you have to run it. Did you see our other videos where we pass the cables for the HUD and other stuff?
I thought this retrofit was not possible do you by chance have a full part list need to make this possible? The only problem I would have is coding with eSys
Hehe yeah might as well get the masks to have more than one useful function :). I don’t think the rectangular ones have a silicone pad, I have seen a plastic rectangular thing on the windshield where the sensor attaches to.
@@DorksandBolts on the russian web sit i sent you the guy remove something similar than you. But was on picture then dont know if was kind of hard glue or gely like yours haha
Thanks for the video! I have few questions: 1. How to find out that specific date that you edited on 27 min mark? 2. When you saved your 'VO kobmi atm nbt kafas', you mentioned that it is needed to code all of these ECUs. Is it because you installed new HUD, KAFAS etc.? If I change only the 6WB, do I need to code all the mentioned ECUs? Or just the DKOMBI? Thanks in advance!
Hi Rokas, we are happy you enjoyed the video. What do you mean by “find out” do you mean why did I choose that date? And yes in my case I needed to code lol those modules so they all know that I have a 6wb and not 6wa. In your case if you are only adding the 6wb you need to code everything that communicates with it, most of the time it will be the FEM or BDC, HU, and KAFAS, as well as the Komibi so the FA matches your car.
Oh I chose that because the production dates of those modules ranged from 0716 to 0719 (hardware) so I chose an in between all of them to make sure I have functionality between them.
Hi name is Donald, I would like to retrofit head up display in my BMW 440 I in a 2018 convertible, so would I need to change the front windscreen to get the image to look ok ? I should be getting this vehicle in a week or so and I’m trying to get all of the parts that will be required beforehand like the dashboard, light module in the screen and sticky clear adhesive, and the other item that I will need to get is the head up display. So do I need to get any other parts for this retrofit. So my options, that I would like to retrofit in the vehicle I will be comfort access, folding mirrors, Apple CarPlay, head up Display, and speed indication in the cluster.
That is correct unless you have the camera already installed… some windshields will be polarized already, check at the bottom of the windshield if it says HUD
Hi Marc, you could find the enet cable and the software on eBay or Amazon. Do some searches with your favorite web search tool and you will definitely find tons of results.
@@DorksandBolts I have a few WiFi obd connection tools and bimmercode and Carly- would you think I can use bimmercode expert mode for this coding or do I need pc software and that hardwire?
Not really, when I put everything back in; I made sure to put some loctite on screws and blots, also as a precaution I put a little bit more padding on some parts that showed rubbing. So far so good and no rattles whatsoever
Hey, I just retrofitted the HUD (610) to my 6WA (was already installed). What exactly do I have to code then? I think adding 610 should be enough? like in 23:50
I bought a 6wb cluster non hud it dont have heads up display is there a cable i can buy to retrofit the heads up display with the same non hud cluster and input would be appreciated
Hi. In our other video, I tried to install the plug and on the non-hud cluster and it didn’t work. There is no way you can have hud without a hid cluster in the f-series 😢
Did you replace the windshield and the light sensor ? Check the part of the video where we see the difference between the two variants and how to install it
I've seen a few pictures of the 6WB cluster where the gas and temp gauges are upright, like in the traditional analog cluster, instead of turning the gauges sideways. Is this a setting in the cluster that can be changed?
That’s interesting, but don’t I don’t understand what you mean by upright. But as far as I know those two gauges are actually analog. Just a couple of dials.
@@DorksandBolts nope, thats why I asked this :D I thinking also about this retrofit together with kafas, and thanks for this because before this I didn't know that hud need different rain sensor. But still thinking if this retrofit I mean HUD is worth it because of price of new special glass for HUD :(
Hmm, I don't know what I am doing differently but when I code DKOMBI the current gear indicator (P/N/D) doesn't show. I've tried timecriteria 0317 and 0717 but no difference.
Solved. Used the original timecriteria instead of the 0317, 0717 or 1117. It now shows the gear and works but I don't know why. The guides I followed instructed that you need to change the timecrtieria to a date when 6WB was available to the F30. No fault codes when scanned.
Hi are you using icom or just enet cable? I’ve just done this retrofit now I need to code virginised cluster to my car and e-sys won’t connect via vin (greyed) and it just to connect before when I did map update
I used ENET, but IT would be totally recommended to do it with ICOM. IT did happen to me that the VIN connection was greyed out, but I let the car go to sleep (15 mins or so) and then it worked.
@@DorksandBolts it does connect via vin once I let it sit for couple hours, but now I can’t inject CAFD to kombi because option “detect CAF for..” is greyed and where it says I-step it shows “not available”
@@DorksandBolts one more thing which e-sys version are you using? I’m using v3.27 and some people saying that I can’t inject CAFD with this version of e-sys
Sorry probably a dumb question, but I have a 2016 f15 x5 40e with HUD. Would I be able to install this dash? From what I’m reading in these comments I am but someone said no because of the HUD
@@DorksandBolts sorry for the confusion. I already have a hud and want this dash, will this work even if I have a stock HUD? I ask because I was doing some reading and someone else said that if my car came stock with HUD, that I would not be able to do use this dash. Just curious if this is accurate
Hi i have a 2016 328i. I have NBT software right now. Was wondering how you were able to update to the latest EVO software. Please let me know. Thanks.
Here is the whole playlist ua-cam.com/play/PLAO4W7SvXKJ6QnrkQOA09DiDhqnKmif9q.html but the video is this one, but you need a bunch of other things to do. ua-cam.com/video/Krdj4eiVSQI/v-deo.html
Hi, not really. We didn’t code anything like that on the kombi or the HUD yet. But maybe later, of course we will try to either have the mperformance or 435 in there... currently none of those are possible. If you see this showing up at start up, make sure you are coding the VO/FA to the units
Hello, I installed the F30 BMW vehicle to the kafas 2 cameras but is not active Did you have the chance to help me in this regard that I need to get the FSC I am writing to you from Turkey
Hi Arslan, I replied to your other comment on our latest video. Just to keep things in one place, I will only reply there and not the other 4 messages in other videos.
HI, the rain sensor is 61356814596 but make sure that it does have all the functions for your car as well, these are very option dependent. yeah I did replace the windshield, check out the other video.
Hi Kaiwen, the style is country specific. The round circle is for Europe and Asia, square is for North America and some odd Europe country I believe... I have seen the option to change the way it displays inside the kombi module, but I don’t know if that might interfere or not recognize traffic signs. Technically it shouldn’t, but I can’t be sure about it.
@@DorksandBolts I was just plug module between the cluster and inside just like Bimmertech but way cheaper and code on BimmerCode that’s work, it’s not like 5series or new model recognize the traffic sign by kafas whatever camera, I think it is base on data on your own navigation map.
Hi Nikola, there are so many things that can cause this. Did you have the option working before? Where are you trying to turn the HUD on? Did you retrofit something else? I really can’t say much if you don’t give me more details about what exactly is going on and what have you done to the car
Hey man nice videos I like your car I im in Ottawa and I just ordered a 6wb cluster would you be interested in coding it for me i come down to mtl a lot I would obvs pay you, je parle francais aussi
Hi Pat, thank you for the encouragement. I would love to help you out and coding it for you. However I am currently outside Canada. We could try to do it remotely too. All you need to do is get a enet cable.
I am very impressed by your desire to retrofit things...I would say I have the same virus in me...which is great !!! things turned out very well !!! congratulations... and go on. you are in the right direction!!!
Thank you! We are definitely going to get all the bells and whistles on this thing. Please let us know about your retrofits as well
This guy knows what he's talking about and very good at explaining its all too! Not like other UA-camrs
Thank you! I appreciate it. I really try to do my best to make all of this accessible for anyone that wants to do it.
Love your videos don't stop please your helping
Congratulations for the job. I did the same retrofit on my F30 2013. Plugging the HUD is the simple part of the job. The more complicated part is to remove all parts from shift parts to dashboard. It's a hard work takes long time...
Again congratulations 👍
hi man can i know some details about the retrofit? i also have a f30 wants to do the retrofit and did you cut a hole on your dash? I also bought a second hand rain solar sensor but don't know where to buy the gel to stick on the windscreen
Hey! So no I didn’t cut the dashboard. If you look at the other video about the change color you’ll see why… it’s doable, but I don’t like to do things that way… check it out. The silicon thing part number is 61 35 9 856 157 I got it through ecstunning but if you are in Europe you can get it through schmiedmann. Hopefully one day they will show me love the way I show them love Hahahah… sponsor requiered. Also don’t forget to change the windshield
@@DorksandBolts hi thx for reply, I don’t have enough budget to change the whole dashboard and windscreen. Even has double vision I am still gonna use it. I bought a rhd hud from China for only 90 dollars, just try to find all the other harness bolt and rain sensor also the air duck.
You finally did it ! Awesome man congrats!
Yeah! it is incredible, it took a while but now I am ready for more
@@DorksandBolts getting my 6WB soon, i’ll message you soon ;)
Amazing work man! Congratulations!
Do not disconect the camera, ADAS recalibration will be required after. :). You can easily remove just the rain sensor with out all that mess
Well I disconnect the battery most of the time so the camera is unaffected. But yes good point. It does need to be calibrated. Since this was a full retrofit I am used to do that on a regular basis now 😂
Do you have any advice for some starting out whit retrofit? Any programs things of that nature. Also very nice you did an amazing job keep up the good work I will stay tuning in for the next up date!
Hi Terrance, that’s a little tough to say. But I would say that it starts by deciding if some feature is something that you really want and can somehow help you enjoy your experience with your car. So it’s a little bit different for each person. Before jumping into any programs for coding, I would suggest really reading up on how your car systems work and what do you need to achieve the retrofit you are after, because these cara are very easy to break if you don’t know what you are doing. That said, if you have more questions, I wouldn’t mind helping you figure things out.
Nice job.a verry rare video with retrofit coding.i just wanna ask you did you used a battery charge or something like that during the coding.ot just keep the engine on.and if you know does my 530xd 02 2012 foes support nbt nbt evo retrofit? 🤔.thx and waiting for more coding and retrovideos
Yes always use a battery auxiliary power to keep it over 14.4v no matter what you do. It might sound overkill for even simple codings, but better be safe than sorry
Very well done.
Does the car already have that cable connection tha goes on to HUD?
Thank you! I am very proud of it :) and no, you have wire everything.
Great video! I have an f36 2015, if i retrofit hud from a junkyard what coding do i need to do to get it functioning? Or is it the same coding as you did in this video?
Hi, awsome job!!...did the HUD require a different dash? Or was the dash cut out to fit?...currently looking at buying a used part HUD unit 👍
Yeah it does need a different dash, check out the other videos where I explain how to change it, and even change the color of the dash. As I say on that video there are people that cut the dash, but I prefer not to do it.
@@DorksandBolts thanks!
Hi I’m Alex congratulations you did good job , can you help with cluster I need to change for digital cluster F36 2017
Hello, I congratulate you for your work, I will be glad if you help with something. I have a 2014 model BMW f30 vehicle I have installed 2 cameras in my vehicle, but it gives a calibration error, but the high-beam assistant comes on, lane tracking enters but does not read the speed signs, it does not reflect on the screen, so I think it gives the caliber error, what should I do. thank you in advance
Is ur windshield tinted? I’m thinking it can help the hud look better on a non hud car.
No, the windshield is not tinted. I guess it can be a solution; however, in Canada, putting any film on the windshield is illegal.
Hi! Great video. I’ll be doing the same on my f15. I have a dashboard and a display already. It looks like I have to change that rain sensor too. Could you please let me know if the HUD cable was in the car or you had to run it? I am just not sure if my car has it or I have to get it and install it.
Hi, glad you like the video! The cable was not there, you have to run it. Did you see our other videos where we pass the cables for the HUD and other stuff?
Thanks for the reply! I could not find the wiring video. Could you please send me a link to it? Thank you!
This is amazing 👍😍
I thought this retrofit was not possible do you by chance have a full part list need to make this possible? The only problem I would have is coding with eSys
Yeah the parts numbers are on the previous videos and how to wire all the stuff as well.
Great job !!! :) good to clean with mask haha. do you think for my e64 bmw have the silicon pad ? mine is not round ;)
Hehe yeah might as well get the masks to have more than one useful function :). I don’t think the rectangular ones have a silicone pad, I have seen a plastic rectangular thing on the windshield where the sensor attaches to.
@@DorksandBolts on the russian web sit i sent you the guy remove something similar than you. But was on picture then dont know if was kind of hard glue or gely like yours haha
hello sir i have f30 2017 i m really interested to install head up display please can u tell me the list of items i needed for hud thanks
Hi Candel, there is a whole series of videos on this, did you see all of them??
Thanks for the video! I have few questions:
1. How to find out that specific date that you edited on 27 min mark?
2. When you saved your 'VO kobmi atm nbt kafas', you mentioned that it is needed to code all of these ECUs. Is it because you installed new HUD, KAFAS etc.?
If I change only the 6WB, do I need to code all the mentioned ECUs? Or just the DKOMBI?
Thanks in advance!
Hi Rokas, we are happy you enjoyed the video. What do you mean by “find out” do you mean why did I choose that date?
And yes in my case I needed to code lol those modules so they all know that I have a 6wb and not 6wa. In your case if you are only adding the 6wb you need to code everything that communicates with it, most of the time it will be the FEM or BDC, HU, and KAFAS, as well as the Komibi so the FA matches your car.
@@DorksandBolts
Yes, you edited your VO Zeitkriterium=1113 to Zeitkriterium=0317.
Why that date and not any other?
Oh I chose that because the production dates of those modules ranged from 0716 to 0719 (hardware) so I chose an in between all of them to make sure I have functionality between them.
Hi name is Donald,
I would like to retrofit head up display in my BMW 440 I in a 2018 convertible, so would I need to change the front windscreen to get the image to look ok ?
I should be getting this vehicle in a week or so and I’m trying to get all of the parts that will be required beforehand like the dashboard, light module in the screen and sticky clear adhesive, and the other item that I will need to get is the head up display.
So do I need to get any other parts for this retrofit.
So my options, that I would like to retrofit in the vehicle I will be comfort access, folding mirrors, Apple CarPlay, head up Display, and speed indication in the cluster.
That is correct unless you have the camera already installed… some windshields will be polarized already, check at the bottom of the windshield if it says HUD
Love the video. Where do I get the necessary equipment (obd to pc cable) and software to code?
Hi Marc, you could find the enet cable and the software on eBay or Amazon. Do some searches with your favorite web search tool and you will definitely find tons of results.
@@DorksandBolts I have a few WiFi obd connection tools and bimmercode and Carly- would you think I can use bimmercode expert mode for this coding or do I need pc software and that hardwire?
We do not have experience of doing this with OBD readers, so I would be wrong to say that “computer software is the only way to do it”
Great video, if you don’t mind what was the rain sensor gel pad part number?
Hi Salvador, the part number is: 61359856157 I think this is the same for all f3x chassis but make sure of it.
@@DorksandBolts thank you for that.
What are you using to code
when you disassemble the whole dash like that when you put it back in won't some parts start to creek or something like that?
Not really, when I put everything back in; I made sure to put some loctite on screws and blots, also as a precaution I put a little bit more padding on some parts that showed rubbing. So far so good and no rattles whatsoever
Hey, I just retrofitted the HUD (610) to my 6WA (was already installed). What exactly do I have to code then? I think adding 610 should be enough? like in 23:50
Hey! Nice job, yeah add 610 and you are pretty much done.
I bought a 6wb cluster non hud it dont have heads up display is there a cable i can buy to retrofit the heads up display with the same non hud cluster and input would be appreciated
Hi. In our other video, I tried to install the plug and on the non-hud cluster and it didn’t work. There is no way you can have hud without a hid cluster in the f-series 😢
Great job!
I did retrofit hud on my f34, but in day time and sunshine cant see any thing!!!! Any advice?
Did you replace the windshield and the light sensor ? Check the part of the video where we see the difference between the two variants and how to install it
@@DorksandBolts windshield yes but not rainsensor!
There you go, that will be that final component, just code it properly
I've seen a few pictures of the 6WB cluster where the gas and temp gauges are upright, like in the traditional analog cluster, instead of turning the gauges sideways. Is this a setting in the cluster that can be changed?
That’s interesting, but don’t I don’t understand what you mean by upright. But as far as I know those two gauges are actually analog. Just a couple of dials.
Hi you didn't change windshield, I know that for HUD there is special one
Hi, yeah the windshield was changed, did you see the other video about it??
@@DorksandBolts nope, thats why I asked this :D
I thinking also about this retrofit together with kafas, and thanks for this because before this I didn't know that hud need different rain sensor. But still thinking if this retrofit I mean HUD is worth it because of price of new special glass for HUD :(
That’s great to hear, look at the whole playlist, I think we have a video for each of the things you want to do… and the ones you don’t know yet 😂
Hmm, I don't know what I am doing differently but when I code DKOMBI the current gear indicator (P/N/D) doesn't show. I've tried timecriteria 0317 and 0717 but no difference.
Solved.
Used the original timecriteria instead of the 0317, 0717 or 1117. It now shows the gear and works but I don't know why. The guides I followed instructed that you need to change the timecrtieria to a date when 6WB was available to the F30.
No fault codes when scanned.
Perhaps the later date models use KCAN2 instead of KCAN as my 1111 timecriteria?
great job! do you need special windshield for the HUD to project on?
Yes you do. Otherwise you’ll get double image
Hi are you using icom or just enet cable? I’ve just done this retrofit now I need to code virginised cluster to my car and e-sys won’t connect via vin (greyed) and it just to connect before when I did map update
I used ENET, but IT would be totally recommended to do it with ICOM. IT did happen to me that the VIN connection was greyed out, but I let the car go to sleep (15 mins or so) and then it worked.
@@DorksandBolts it does connect via vin once I let it sit for couple hours, but now I can’t inject CAFD to kombi because option “detect CAF for..” is greyed and where it says I-step it shows “not available”
@@DorksandBolts one more thing which e-sys version are you using? I’m using v3.27 and some people saying that I can’t inject CAFD with this version of e-sys
Do I need to install the camera as well in order for the hud to work?
No, the hud works just with the cluster, you do have to have the plug for it in either the 6wa or 6wb
Sorry probably a dumb question, but I have a 2016 f15 x5 40e with HUD. Would I be able to install this dash? From what I’m reading in these comments I am but someone said no because of the HUD
Hi, I am be misreading your question, but I am confused, you want to install the hud dash? But you already have hud?
@@DorksandBolts sorry for the confusion. I already have a hud and want this dash, will this work even if I have a stock HUD? I ask because I was doing some reading and someone else said that if my car came stock with HUD, that I would not be able to do use this dash. Just curious if this is accurate
Would it be possible that you send me a message on instagram?
Hi i have a 2016 328i. I have NBT software right now. Was wondering how you were able to update to the latest EVO software. Please let me know. Thanks.
Hi, I changed the entire unit from nbt to nbt-evo or also know as id4, check out that video
@@DorksandBolts Hi thanks for your response. Do you think you can link that video? Thank you.
Here is the whole playlist ua-cam.com/play/PLAO4W7SvXKJ6QnrkQOA09DiDhqnKmif9q.html but the video is this one, but you need a bunch of other things to do. ua-cam.com/video/Krdj4eiVSQI/v-deo.html
hi, do you have the 550d logo pop up upon start up?
Hi, not really. We didn’t code anything like that on the kombi or the HUD yet. But maybe later, of course we will try to either have the mperformance or 435 in there... currently none of those are possible. If you see this showing up at start up, make sure you are coding the VO/FA to the units
How did u get the hud and that updated map on your screen display. Looks beautiful
Head up display was bought from a junkyard, and the maps is just the id5 or id6 nbt evo retrofit :)
Hello, I installed the F30 BMW vehicle to the kafas 2 cameras but is not active Did you have the chance to help me in this regard that I need to get the FSC I am writing to you from Turkey
Hi Arslan, I replied to your other comment on our latest video. Just to keep things in one place, I will only reply there and not the other 4 messages in other videos.
Hi can share the part number for the light sensor also did you replace windscreen?
HI, the rain sensor is 61356814596 but make sure that it does have all the functions for your car as well, these are very option dependent. yeah I did replace the windshield, check out the other video.
love the video, I have a 2103 328i xdrive and i wan to update my hud can you help
Hi, what do you mean update your hud? Do you have the b&w version? Or do you want to update the software to have the latest graphic interface?
I am so interested in doing this. I just found your videos with this one. Is this possible for the f32?
this is an F32, all of it
@@DorksandBolts I too am very interested in this type of retrofitting/customizing! I appreciate your efforts! 💯👏🏽👏🏽👏🏽
Did you have a HUD windshield already?
No, I changed it before the upgrade, check that other video as well ;)
Where did u get the speed limit module mine is red and it’s circle, but I prefer the oem white square
Hi Kaiwen, the style is country specific. The round circle is for Europe and Asia, square is for North America and some odd Europe country I believe... I have seen the option to change the way it displays inside the kombi module, but I don’t know if that might interfere or not recognize traffic signs. Technically it shouldn’t, but I can’t be sure about it.
@@DorksandBolts I was just plug module between the cluster and inside just like Bimmertech but way cheaper and code on BimmerCode that’s work, it’s not like 5series or new model recognize the traffic sign by kafas whatever camera, I think it is base on data on your own navigation map.
I don’t have experience with those emulators, but probably you can just change the signal settings on kombi from US to ECE
I have problem with my f30 oem head up not possible turn on in nbt tab please help :( ?????
Hi Nikola, there are so many things that can cause this. Did you have the option working before? Where are you trying to turn the HUD on? Did you retrofit something else? I really can’t say much if you don’t give me more details about what exactly is going on and what have you done to the car
I buy yesterday my bmw f30 m pack 2014 with vin options headup but not possible turn on in the hud tab nbt...
Can you please send us a message on our Facebook or Instagram page with a video showing exactly what you are trying to do?
Yes thanks i am send on instagram👌
I need connected touch pad and module due a video please
Hi Amalia, there might be a video about this coming up. We need to finish all the previous projects first :)
Hey man nice videos I like your car I im in Ottawa and I just ordered a 6wb cluster would you be interested in coding it for me i come down to mtl a lot I would obvs pay you, je parle francais aussi
Hi Pat, thank you for the encouragement. I would love to help you out and coding it for you. However I am currently outside Canada. We could try to do it remotely too. All you need to do is get a enet cable.
@@DorksandBolts hey sorry I didn't see this but no i just ordered one on Amazon, were did u get the 6wb from? Thanks sorry for the late reply
Hi pat, I got it from my local BMW dealer.