How to Replace Front Engine Mount 03-12 Volvo XC90

Buy Now!
New Engine Mount Set from 1AAuto.com 1aau.to/ib/1AEE...
New Engine Mount from 1AAuto.com 1aau.to/ib/1AEM...
1A Auto shows you how to remove, install, change or replace a broken, worn out motor mount. This video is applicable to the 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, Volvo XC90.
This repair was done on a 2004 Volvo XC90 2.5T 2.5L and the process should be similar on the following vehicles:
2003 Volvo XC90
2004 Volvo XC90
2005 Volvo XC90
2006 Volvo XC90
2007 Volvo XC90
2008 Volvo XC90
2009 Volvo XC90
2010 Volvo XC90
2011 Volvo XC90
2012 Volvo XC90
2013 Volvo XC90
2014 Volvo XC90
🔧 List of tools used:
• 18mm Wrench
• 10mm Socket 1aau.to/ogS/1AX...
• 15mm Socket 1aau.to/oh6/1AX...
• 17mm Socket 1aau.to/oh6/1AX...
• 18mm Socket
• Ratchet 1aau.to/oiY/1AX...
• Socket Extensions 1aau.to/oh6/1AX...
• Torque Wrench 1aau.to/oe6/1AX...
• Floor Jack 1aau.to/oct/1AX...
• Jack Stands 1aau.to/och/1AX...
Subscribe: / @1aauto
Check out our playlist:
Volvo XC90 2003-2012 1st Generation: • Volvo XC90 2003-2012 1...
For More Info visit us at 1aau.to/h/bRX/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*

[@elguapo4tube]

Great video, very helpful. With my 2004 XC70 I had to remove the passenger side mount too in order to jack the engine up high enough.

[@localflavor1866]

The airbox hose on the 2007 up is mounted differently from the '06 and below models

[@teacher913]

Beyond excellent demo. Kudos

[@eddiewouldgo19]

Nice work! Couple quick questions. Do you also need to loosen the passenger side mount(wheel well area under timing belt) so that it doesn't stress when engine is raised and is that 14 mm bottom bolt holding the mount reusable or should it be replaced?

[@legambaz]

What about the mount for the rear? I was all excited when you said you're replacing those rounded mounts. There're 2 of them. Thought you were going to do it for front and back.

[@1AAuto]

+Alofzico We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com

[@jolo-bolo]

Yes right no mention of the vacuum line that go into the original ones you have to take off. And then put back on by being double jointed or hanging upside down in the engine bay.

[@1AAuto]

+Kevin Ellis Thanks for the feedback! We'll pass this info along to our production team.

[@ArifRahman-qv9iu]

Hello team ,
I have a 2007 Volvo XC90 3.2 auto petrol . It’s been few months now I hear a dragging tatatata continuous noise WHEN I start to accelerate, any ideas please will be appreciated?? Many thanks in advance!!

[@ighostkasper44]

Hi. What is the mount replacement interval?+-

[@sleepylion4977]

Snap on!!!!!

[@hankgoodman3864]

Do the mounts contains fluid, there's some type of oil under it?

[@DLindgren46]

I would have liked to se you take away the plastic box ontop of the front engine mount. didnt see you connect the vacuum hose either?

[@1AAuto]

+Daniel Lindgren Thanks for the feedback!

[@shilohglobalministriesapostlej]

Need mounts for xc90 2010

[@shangenginemount5650]

Hello friend, I am a factory that produces engine mount. We specialize in Toyota and Honda series. Is there any chance I can cooperate with you?

[@iroekyjHD]

Do the acura rsx!

[@a7xinnm]

Does the car need to be on a lift in order to replace all motor mounts?

[@eddiewouldgo19]

If you have an xc90 you can do all the mounts with all four wheels on the ground if you wanted to. When doing the 3 bottom mounts(2 hydraulic style & 1 transmission mount) it is easier if the car is on ramps to give you a little more clearance under the car, but isn't completely necessary if you don't have them. You will need a floor jack to support/lift the engine for each of the lower mounts.

[@winterbrotherz]

Does anyone know if it’s the same on the V8 XC90?? I’m working on getting the old mount and it seems much different

[@lukem9962]

different engine its a yamaha based v8 this is a whiteblock

[@CMnutrition]

There is a part difference. I have the V8.

[@mariogonzalez8904]

Ok

[@oyetim1506]

Thanks bro, volvo ain't practical with convenience of replacement in a lot of their designs.

[@1AAuto]

+Rotimi Yinka Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c