How to Rebuild 1965 1966 Mustang Vent Wing Windows Episode 400 Autorestomod
Вставка
- Опубліковано 5 вер 2024
- How to Rebuild 1965 1966 Mustang Vent Wing Windows Episode 400 Autorestomod
Tear down video: • How To 1965 1966 Musta...
We rebuild a Mustang vent wing window assembly using the National Parts Depot reproduction vent windows Frame Assy Vent Window LH Frame Only Chrome: 22205-1C on the 1966 Mustang we call the Punisher. We show how to make custom tools for parts of the install. We show you how to use pop rivets to install the division bar on your vent window frame.
Check out the web site: www.autorestomod.com
/ autorestomod
Thanks for watching!
Jeff Ford Contact:
Jford@autorestomod.com
Parts:
www.npdlink.com
Frame Assy Vent Window Lh Frame Only Chrome: 22205-1C
Seal Vent Window top corner best repro: 21774-1
Weatherstrip Kit Vent Window Division Bar 2 Weatherstrips: 21450-1K
Bolt Kit Vent Window Frame 6 Special Studs: 22204-1K
Seal Strip Glass Channel 1/16 Inch Tk 4: 214A10-1
Handle Set Door Vent Window Beautiful Chrome: 22916-7-1A
Weatherstrip Vent Window Pair Now Sold As Pairs: 21448-1A
Rivet Kit Vent Window Division Bar Original Style: 21450-1AK
Run And Bracket Assy Vent Window LH repro: 21539-1A
Brass wool and or a brush is the best way to polish chrome without scratching it. It cleans off the rust and polishes at the same time. Love your videos they are so helpful to me and probably many people like me.
Good tip! We like it too. It's been hard to find locally.
Just want to say thank you. It's nice to have this kind of info on video when we need it.
I took your advise and just purchased the completed assembly. The only thing I don’t like with the repop is the etching on the new glass. I may replace the glass with my original date coded Carlite before I install. The new chrome is going to look great in the 68.5 Cobra Jet.
That there is one of my dream cars.
I changed the glass out yesterday. The original Carlite fit perfectly.
I use Mc Kay brake cylinder assembly lube works great with rubber parts
Soapy water works great to lube rubber while getting it seated in the channel. Also, a mix of soap and rubbing alcohol will work.
Great tips, thanks!
You guy's didn't show us anything about doing the riviting aw c'mon I've never restored a vehicle before ('65mustang hardtop) so it'd be nice to know what I was getting myself in to 🤔..??
If you are trying to get really shiny chrome or silver paint look. First spray the material in a high gloss black. If possible wet sand to 1000 grit before spraying chrome/silver.
Good point! that area is so small wet sanding it would require a magnifying glass. LOL
You guys are great! I really appreciate videos like this. So, thank you! Still nervous about doing this, but at least I know how, now.
Sorry to be so offtopic but does anyone know of a tool to get back into an Instagram account..?
I somehow forgot my account password. I love any tricks you can offer me!
@Royce Eliseo instablaster :)
@Aden Kaiser Thanks for your reply. I got to the site thru google and Im in the hacking process now.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Aden Kaiser It worked and I now got access to my account again. I am so happy:D
Thank you so much you saved my account!
@Royce Eliseo no problem :)
I just completed this project, Id like to add some details i feel need to be address that are missing from this video .i was able to COMPLETELY ELIMINATE ALL THOSE BARREL RIVETS during my assembly.
1. use 5/32 x 3/8 POP rivets for division bar to frame. (2ea per side). these holes may need to be opened slightly to fit 5/32 pop rivet
2. use 2-part urethane panel adhesive (3m, loctite) instead of those micro tiny barrel rivets for the rubber seal that attaches to division bar.
3. you can even use a 5/32 x 1/4 POP rivet for that stupid rubber tip seal.
problem with pop rivets is you need a spacer between the rivet and gun to fit the rivet gun inside the division bar track and BUT then there is no bite left on the rivet nail, make sure to buy pop rivets with long nail mandrels, could be hard to find? was for me
$100 per side to rebuild or $366 per side to buy outright, you decide, thats a $620 total savings hmmm
Forgot to tell ya last week....Congrats on 400!
Thanks! We still can't believe we haven't been kicked off the net yet...We have an episode short on that. Just trying to find time to cut it and post it.
I spray CRC / WD40 on the rubber components to make installation easier
Great idea! We do that too, but Cam grabbed the grease...he's bigger than me so I let it ride 😃😁😃
Lost the little screw for the division bar.. any ideas how to replace or order?
I'd have to do the same thing you're going to have to do, which is contact National Parts Depot to see if they stock that screw.
I have a 65 t-bird would it be almost the same procedure? Or night and day difference?
Honestly, I don't know. We haven't messed with the T-bird.
Where did you get the stripping for the vent window itself? Mine is mostly missing and the glass wants to fall out.
What type and size of rivets were used it the rivet gun?
Honestly, it depends on the hole. I have a set bunch of rivets that I got from Harbor freight and I will size them accordingly.
What is the rivet tool part name from national parts depot?
TOOL, VENT WINDOW SEALS AND QUARTER SNAP STUD #927-1 (Their all caps not mine.
www.npdlink.com/product/tool-vent-window-seals-and-quarter-snap-stud/106850?backurl=search%2Fproducts%3Fsearch_terms%3Dvent%252Bwindow%252Btool%26top_parent%3D200001%26year%3D1965&year=1965
Auto saw or auto solv it's awfully hard for me to understand him when he's explaining what he's doing/while he's doing it..
I'm still nervous, trying a second time...
Keep at it. You got this!
Guy doing the explaining hmm.. I wonder what area of the country he's from 🤔..??
I'm proudly from Aiken South Carolina born and bred but I did spend 18 years in Houston Texas
That's not a pop rivit, I have pop rivits that small that work.
What size pop rivet do you recommend. Thanks
strong hair game
And with my barber shop being closed due to the COVID 19 thing it is getting stronger all the time...
M
B
Guy on left almost reminds me of "chumlee" from the show pawnstars except I seriously doubt he's as dumb as chumlee pretends to be on that show
He's not. Cam is very very sharp probably one of the sharpest mechanics I know for his age group. And I bet chumley is not all that dumb either to be honest with you. =)
Would be useful to watch this but these guys get on my nerves !