@@angel.m9960with most aftermarket cams you have to do the MDS delete kit. What doesn’t make sense to me is that their delete kit includes a cam as well. So I’m wondering if I can order the kit without the cam, since I’d already have a cam in the other package lol
Great tutorial on cam swaps. 3 things I would do different. 1. Hit on the top of the MDS with a hammer and it will twist and lift easily without breaking. Hitting it breaks the seal the MDS has to the block due to the heat/cool cycles. 2. I would do the Hellcat oil pump swap while I have it all open. Would give you increased oil pressure and volume. A possible cure for the famous Hemi ticks. 3. There is already a marking on the chain to align the camshaft and the crankshaft, I would reposition to correctly to make absolutely sure it is timed together correctly. The mark is easily seen two links to the right on your motor. Side note, I always look forward to your videos and you are one of my top subscription video on my list. Keep up the great work and content.
I have a 2016 5.7 Dodge Challenger RT plus Shaker. I'm looking to do a cam in my vehicle but I was told I couldn't because of all the technologies underneath the hood. I would love to have some input. I would be even willing to ship it somewhere to get it done
On a 5.7 Hemi, when doing this, be sure to replace the stock oil pump for a High Volume oil pump. This is a big investment in your engine, might as well lubricate it properly.
Sounding amazing John!!! You must really be under the gun with having to get the jeep ready too??? I’ll be looking forward to seeing that as well coming up!!! Try and stay cool in the Florida heat and I’ll see you in the next amazing video!!!
@@sleepychallenger yea I seen sky on the Reignited UA-cam channel recommend it so I tried it on the motor I'm currently rebuilding an all 4 came out smooth with a slight twist.
Just did mine like that too. Hammer and none of them broke. Apparently there’s magnets under them that should be removed too. Didn’t know that 😮 so guess the magnets are staying in mine.
@BoostedMotorsports Can you run SDPC cam for the Gen III non eagle in the newer gen eagle platform? Looking at the stage 2, don’t know if I can use on a 2013 ram
So wait I thought the oil pan had to come off to get that timing cover off to swap a cam ...I see you didn't ? I've been constantly a cam swap but have no other reason to pull apart the engine and the pan is quite the pita to get off on a Durango it's...but if it don't gotta come off I'm rto really have to reconsider this cam swap with a slightly modest street cam and mds delete.
Guess the only question I got is , how do you know if your oil pump is not wearing I guess , you only worry about that if it has cam wear ? Working on a 5.7 now with a few worn cam lobes ,no signs of damage to cam bearing areas ....a couple garbage lifters so i pulled the oil pump , and it's wiped with scoring in the body and on gears Guess if you swap where there is no wear to the cam then you can skip the oil pump stuff ? Kinda wondering what most people do especially for high mileage? Curious what people think 🤔
I wish I had the money, time and knowledge to do things like this 👍 keep up the good work I’ve been watching since you did the v6 fans on the silver cc ram
I wonder where the cams are made I had a 13 Rt 6speed no mds I put 100k of hell miles on that motor and the cam never failed everything else broke more then once and try to find a good water pump they go every 25k I had 3 put in
Could this cam be installed on a newer gen 4 hemi that will have the non mds delete done and the complete sdpc cam kit? Or is the cam between non vvt and vvt set in stone even if the limiter is installed?
I am wanting to do a 57 hemi swap in my 2000 Dodge sport. What all do I need parts to do that swap? And to get sensors and transmission to work with it
I have a question man i am thinking about getting a stage. Three comp can for my 04 dodge ram truck.Can I use a stockhead?And there?Is there any issue with using the stock heads
@@BoostedMotorsports I was 👌🏻 thissssssss close to pulling the trigger on a project SS/T and then a daily driver R/T, but I didn’t need more projects (plus they weren’t the right ones for me). Instead I’m going the route of 4th gen Ram 1500 (already planning on doing what you did with yours and adding the gauge cluster and 8.4 Uconnect)
Do you need a bigger stall converter for the stage 3 SDPC camshaft kit? I have a 2012 rt charger and I’m looking to getting this cam instead of the mark 82 cam from FRP
@BoostedMotorsports Is this a gen III block and eagle heads? Theres no stage kits for 2009+ or can you run the gen III cam kit in the newer gen 4 block? even if its non vvt and vvt?
Incredible work John. How long in total did all this take you? This video combined with the one you did last year camming that Challenger seems like a perfect how-to. 💪🏻🍻🍻
What TCM did you use? One from Europe for beamers, zf People? I found one there, Holley doesnt make one for zf Chrysler trannys yet. Which one you found. Would a Holley fuel injection package work on a v6 that I would swap the engine, use a Holley dash and etc. But use the main ECM for power windows and all the other stuff, radio and so on. Wondering if you know about that? No go? Have to but WHOLE car?
So I have an 03 ram 1500 , could I buy this same cam and install it onto the 03 ? And when I do so what should I do right after ? Like what else should I buy besides just a cam shaft ?
Stage 3Camshaft
sdparts.com/i-24529351
Cam install kit:
sdparts.com/i-24527976
What valve spring are you using? I looked at the install kit, and it doesn't mention springs.
How long did it take for you to do this cam kit just asking because my car been in the shop for three weeks is that normal
Do I have to buy both for proper installation or do I just have to buy the camshaft kit.
@@angel.m9960with most aftermarket cams you have to do the MDS delete kit. What doesn’t make sense to me is that their delete kit includes a cam as well. So I’m wondering if I can order the kit without the cam, since I’d already have a cam in the other package lol
@boostedmotorsports I was gonna ask the same thing about the cam. I know you need the delete kit but will you need both cams?
Great tutorial on cam swaps. 3 things I would do different.
1. Hit on the top of the MDS with a hammer and it will twist and lift easily without breaking. Hitting it breaks the seal the MDS has to the block due to the heat/cool cycles.
2. I would do the Hellcat oil pump swap while I have it all open. Would give you increased oil pressure and volume. A possible cure for the famous Hemi ticks.
3. There is already a marking on the chain to align the camshaft and the crankshaft, I would reposition to correctly to make absolutely sure it is timed together correctly. The mark is easily seen two links to the right on your motor.
Side note, I always look forward to your videos and you are one of my top subscription video on my list. Keep up the great work and content.
My OCD approves of this guy . Thorough . Everything he does is thoroughly done . Nothing half ass.
Thanks brother 💪
Nobody cares.
@@Cultofpersonality09129 I care.
Except no new timing set, no hi volume oil pump
I love Scoggin Dickey. They got almost everything there
Think I will watch this video a second time it was so cool.
Thumbs Up !
Thanks brother 💪
Outstanding, music to my old ears. Nothing like a choppy cam.
She is a "Thumper" wow, can't wait to what is next? Master of your craft- Mopar Madness U R!!! 😂
Do you guys do your own tuning or get someone to tune it for you?
This SST will go down as one of the best modernized 2nd gen builds I’ve ever come across.
Jam up job man.
I'm loving this build Jon! Can't wait for dyno day!
A bit worried about doing this myself but I'll watch this like 5 more times and I might do it on my 19 r/t charger
I did it easy af bro
@@NikoBrawleydid you have to get a tune for it to idle and drive or do you think i’ll be good
where did you find the bolt tightening pattern/ torque specs
love them HOG ASS CAM sounds!
Excellent tutorial on the cam swap! This truck will haul some serious bacon! Thanks for a cool video!
This is by far the best HEMI cam replacement video I have seen. Excellent job John. Detailed steps with great video.
Sounds like a beast. I love it .
Your doing a great job. Learned alot for your video's.
now it sounds like it looks. lumpy! what a job.
My mans doing this in flip flops and garages are charging 10k to do cams in these things😂😂
Fantastic work Jon!!! Love the hacking and thumping👍
what brand are those long tube headers?
I have a 2016 5.7 Dodge Challenger RT plus Shaker. I'm looking to do a cam in my vehicle but I was told I couldn't because of all the technologies underneath the hood. I would love to have some input. I would be even willing to ship it somewhere to get it done
On a 5.7 Hemi, when doing this, be sure to replace the stock oil pump for a High Volume oil pump. This is a big investment in your engine, might as well lubricate it properly.
You are a genius my brother
God bless you
Well done
Sounding amazing John!!! You must really be under the gun with having to get the jeep ready too??? I’ll be looking forward to seeing that as well coming up!!! Try and stay cool in the Florida heat and I’ll see you in the next amazing video!!!
It’s going to be coming down to the wire but I’ll get it done 💪
Is that thing gonna require a stall?
Sounds great! Can't wait to see it next to the hellcat ram and dakota at MoParty! 👍
On them mds solenoids find that it you give them a whack with a rubber mallet before trying to get them out they come right out no prob.
Was going to say the same thing. Just did it on a very crusty block and was shocked when they came right out
@@sleepychallenger yea I seen sky on the Reignited UA-cam channel recommend it so I tried it on the motor I'm currently rebuilding an all 4 came out smooth with a slight twist.
Just did mine like that too. Hammer and none of them broke. Apparently there’s magnets under them that should be removed too. Didn’t know that 😮 so guess the magnets are staying in mine.
@BoostedMotorsports
Can you run SDPC cam for the Gen III non eagle in the newer gen eagle platform? Looking at the stage 2, don’t know if I can use on a 2013 ram
Just wondering you had access to the stock oil pump did you consider changing it to a hellcat oil pump?
Absolutely it is a must
So wait I thought the oil pan had to come off to get that timing cover off to swap a cam ...I see you didn't ? I've been constantly a cam swap but have no other reason to pull apart the engine and the pan is quite the pita to get off on a Durango it's...but if it don't gotta come off I'm rto really have to reconsider this cam swap with a slightly modest street cam and mds delete.
Guess the only question I got is , how do you know if your oil pump is not wearing
I guess , you only worry about that if it has cam wear ?
Working on a 5.7 now with a few worn cam lobes ,no signs of damage to cam bearing areas ....a couple garbage lifters so i pulled the oil pump , and it's wiped with scoring in the body and on gears
Guess if you swap where there is no wear to the cam then you can skip the oil pump stuff ?
Kinda wondering what most people do especially for high mileage? Curious what people think 🤔
I wish I had the money, time and knowledge to do things like this 👍 keep up the good work I’ve been watching since you did the v6 fans on the silver cc ram
I appreciate that!
It sounds amazing
How do you run these truck on the street if the motors needs cats an or sensors
Is Florida 🫡
what you do with the mds harness???
I wonder where the cams are made
I had a 13 Rt 6speed no mds I put 100k of hell miles on that motor and the cam never failed everything else broke more then once and try to find a good water pump they go every 25k I had 3 put in
How did you get the washers inside Iam stuck on the pulley can't get it out
What are you guys were doing your Springs and heads why didn't you take the valves out check them and maybe lap them a little
She rowdy sounding like a freight train takein big breathes of air 😆!!
Sounds really good, John! Would enjoy a few cracks on the throttle, but I guess we must wait 😢😂👍🙏.
Could this cam be installed on a newer gen 4 hemi that will have the non mds delete done and the complete sdpc cam kit? Or is the cam between non vvt and vvt set in stone even if the limiter is installed?
How did you determine you had to use three shims on the springs? What did you look for/notice?
Great work sounds good 💯
Do you have to replace the cam bearings
does the new cam in anyway effect the braking system? Like the video awesome information!
I am wanting to do a 57 hemi swap in my 2000 Dodge sport. What all do I need parts to do that swap? And to get sensors and transmission to work with it
Sweet build Jon!
Does the cam make it rough for longer weekend trips? Asking about drive ability issues
nice work that truck sounds awesome....
I need this done to my challenger!! Where is your place located? Can you work on my challenger 5.7?
I have a question man i am thinking about getting a stage. Three comp can for my 04 dodge ram truck.Can I use a stockhead?And there?Is there any issue with using the stock heads
I think my want for an SS/T and a Dakota R/T is because of you guys.
💪💪💪
@@BoostedMotorsports I was 👌🏻 thissssssss close to pulling the trigger on a project SS/T and then a daily driver R/T, but I didn’t need more projects (plus they weren’t the right ones for me). Instead I’m going the route of 4th gen Ram 1500 (already planning on doing what you did with yours and adding the gauge cluster and 8.4 Uconnect)
Nice work brother. I have a 5.7L hemi in a 18 ram but I’m finding it hard to get parts for it to do any upgrades or mods to it?
How much for parts and cost for you guys to do that to my 2011 2500 ram hd 5.7 liter
So does this kit come with all the gaskets and everything ??
🪓🪓🪓Now that's some chop!🪓🪓🪓
Heck yeah!! Super happy with the first startup and can’t wait to get behind the wheel 💪
If I were to get this camshaft kit, can I tune it with Diablosport? @BoostedMotorsports
Yes 👍
That’s a phat can heck yeah dude👌
Do you need a bigger stall converter for the stage 3 SDPC camshaft kit? I have a 2012 rt charger and I’m looking to getting this cam instead of the mark 82 cam from FRP
@BoostedMotorsports Is this a gen III block and eagle heads? Theres no stage kits for 2009+ or can you run the gen III cam kit in the newer gen 4 block? even if its non vvt and vvt?
When installing the camshaft does it only go in one way after setting TDC or can you just put it in any way?
Iv done tons just hit the top of the mds plugs with a rubber hammer and should come out without breaking
How did you torque the camshaft phaser and the crankshaft bolt to spec?
Wondering 💭 what the old cam looks like ?
Ya took it out of view so quick.
Complete Kit Cost? Also time for the new Melling High Volume oil Pump! It's apart , no better Time IMO
Sounds awesome!! Bowtie killer!!!
Incredible work John. How long in total did all this take you?
This video combined with the one you did last year camming that Challenger seems like a perfect how-to. 💪🏻🍻🍻
I see you're installing a stage 3 do you still need to do pushrods and springs for a stage 2
What tuner for this kit? Dyno?
Diablosport predator is enough?
I know this video old bro but did you use the factory shim also and put the new shims on top?
Sounds like two drummer boys beating on anvils.
What TCM did you use? One from Europe for beamers, zf People? I found one there, Holley doesnt make one for zf Chrysler trannys yet. Which one you found. Would a Holley fuel injection package work on a v6 that I would swap the engine, use a Holley dash and etc. But use the main ECM for power windows and all the other stuff, radio and so on. Wondering if you know about that? No go? Have to but WHOLE car?
hey man you didn't list where you got the cam phaser locker, you mind telling me a link?
I want to do a cam on my 300 so bad but not 100% confident I can get it done in a weekend
How well do those headers perform? And where can I get them? Do they fit in a 2014 chassis?
💪💪
John needs a nickname..... I got it El Chingo del Mopar...
do you know some ways to build my 2007 5.7L Hemi while installing upgraded parts to get more power of it?
I think you had to break in the cam with the stock springs then swap ❤
How long did this take you to do? I'm thinking about doing this by myself
Why not to go with Moe's performance Cam?
So I have an 03 ram 1500 , could I buy this same cam and install it onto the 03 ? And when I do so what should I do right after ? Like what else should I buy besides just a cam shaft ?
Do you have to change stall when you going with a stage 3 cam?
So did u not change the converter? To a 2400 rpm one?
I’ve got a 14 ram 5.7 what cam kit was it I didn’t seen one on there sight for a 09 plus
I was wondering if that shorts video on my phone was real. It sounded like the lift was stuck and bouncing off the locks on my phone.
22:47
Sounds like the theme song of Jaws.
How long did this take start to finish? I'm pumped!
Why do they have a torque for the head bolts and then they do a quarter turn after that why don't they just have a twerk with that included
Will same setup on a non mds hemi, 2004?
Is the VVT kit separate?
Where did you find all the torque specs? Doing my cam next month
Can i drive the cam Stage 1 to 3 from SDPC with a 392 Stroker Kit?
Drop a tut how to cam a ram 3rd gen hemi 2003
What is aprox cost including labor for a job like this
How much was your wait on your cam?
What does it cost to do something like this and is it safe for daily use?
John remind me the advantage of locking that part up???
Has anyone done this on the e-torque hemi?