@ check out you just select the PNP version - PNP will work with the DJI eco system PNP = Plug and Play Will show you when I go live later betafpv.com/products/pavo25-v2-brushless-whoop-quadcopter?variant=40340088651910
Does the drone come with the DJI O3 Air Unit or do you have to buy it seperately? (Also don't judge me if he said it in his video, I skipped a lot of parts)
No worries it's fine. That's why this channel was put together. Most forums and other FB Groups were roasting the new guys.. You have to buy the 03 air unit separately. The GepRC Cinelog 20 comes with everything. Pavo Pico is a great 1st FPV drone if you're first starting out.
Yeah - it drains so fast and over heats which makes it really hard to QA and get some real time metrics Plan to test it again because it would really come in handy to see real time battery 🪫 stats before it falls from the sky
New video next week on adding GPS to Povo Pico unit and getting it to work - setup is totally different with this chip in beta flight.. Change to battery setting too.
Nice Video. I would like to Fly the Pavo Pico with a DJI Integra and and the normal dji transmitter. There are two options which you can buy. 1. : expresslrs 2.4g or 2.: tbs. Which one is the right one?
The ones that I have in my videos are expresslrs 2.4g, DJI 03 VTX DJI Integra Goggles, and DJI FPV remote controller 2… hope this helps betafpv.com/?sca_ref=4346145.dmpY2kV6BJ
I need help! I followed all your setup but the controller just wont work. it Paris fine with the 03 unit but doesn't respond to arming or any commands.
Sorry tad late. Created this video. Everything happens in real time. No edits. Possible that you might have version 2 of the pavo pico. In that case you would be suing UART 5 not UART 6 ua-cam.com/video/jeEEq_CaN7I/v-deo.html
I have a question.I wanna buy the cinebot 30 fpv drone, and I don't know what to buy. I think I need to buy the DJi goggles V2 and the dji remote 2 If you can please send me a link and also I really like your videos.
Hard to say you will need DJI Goggles 3, and RC 3. They work with it and you will future proof your investment. all the new 03 stuff is now backwards compatible.. Will send the links in a bit watch this .. Hope this helps. Let us know how it goes... ua-cam.com/video/wLiHbIsCPAk/v-deo.html
@@IvanRebkovets Sorry thought you saw the live show.. Was able to answer this. everything here is PNP so the plug and play version should do the trick. 18:00 I try to explain.. Let me know if this helps.. ua-cam.com/video/nZDc6nf2zCo/v-deo.html
Thank you so much. But I still have one more question. When I go to geprc when I Choose the Option pnp It. It says it Comes with no receiver. Is that normal? Will it still bind? Or do I need to buy a Receiver. Anyways, just let me know. Thank you for the video.
hmm - not sure.. just checked on my end.. Aside from the audio clipping - seems fine.. Could be setup - on my computer it's fine. Will check headphones. One sec..
Yeah thanks a bunch - just checked.. Real bummer - just tried with my wireless headphone.. Seems to come out on both speakers on the computer but if you're using wireless headphones you only hear it through one ear. Strange because it was recorded in stereo.. Will try and trouble shoot this. Thanks again.. Would have never known. Have to reach out to the folks at DJI apparently the mic is set to stereo but not recording audio correctly.
Included you in yesterdays contest. Someone else one last night. But no one claimed last weeks prize. If no one claims this weeks winning there will be another drawing next weekend. .
Right cause I bind my 03 unit with the dji controller and the integra goggles. All updates on the save firmware but there is no signal on the receiver tab in beta flight. I followed all the procedures in your video even set in CLI sbus bud fast but still no signal on the receiver. Is there anything I’m missing?
Good point.. There are actually 4 videos where there is step by step in rebuilding the drone scratch.. Hope this helps.. You can see more of the frame as the drone is rebuilt and soldered back together. Best thing about these flight controllers is that the motors don't need configuring.. Hope this helps - next month we'll be building a different drone from scratch.. ua-cam.com/video/Mg-KHnlJf9Q/v-deo.html
Hope this helps. The build from scratch was done live and broken up into many videos. Part 1 - Building Pavo from scratch ua-cam.com/video/DcniZz1BN3s/v-deo.html Part 2 - Building Pavo from scratch ua-cam.com/video/Mg-KHnlJf9Q/v-deo.html Part 3 - Building Pavo from scratch ua-cam.com/video/Zt0PNl30I0c/v-deo.html Part 4 - Building Pavo from scratch ua-cam.com/users/livespZ2kFAaywM Solder LEDs - Building Pavo from scratch ua-cam.com/video/yzHsdqTBy5M/v-deo.html Troubleshooting - Building Pavo from scratch ua-cam.com/video/LEw5Gha1eRo/v-deo.html Tear down - Building Pavo from scratch ua-cam.com/video/_WmvOH2fsss/v-deo.html
@@da33ie That would probably be the video at the bottom. the tear down... But if that's not enough - can do an updated teardown tonight.. Live later in the evening. Part 1 - Building Pavo from scratch ua-cam.com/video/DcniZz1BN3s/v-deo.html Part 2 - Building Pavo from scratch ua-cam.com/video/Mg-KHnlJf9Q/v-deo.html Part 3 - Building Pavo from scratch ua-cam.com/video/Zt0PNl30I0c/v-deo.html Part 4 - Building Pavo from scratch ua-cam.com/users/livespZ2kFAaywM Solder LEDs - Building Pavo from scratch ua-cam.com/video/yzHsdqTBy5M/v-deo.html Troubleshooting - Building Pavo from scratch ua-cam.com/video/LEw5Gha1eRo/v-deo.html Tear down - Building Pavo from scratch ua-cam.com/video/_WmvOH2fsss/v-deo.html
Drone Valley. Enjoyed the build! :)
Thanks - there will be more builds in future videos
Could I please have the type of charger for the battery?
Here you go - hope this helps: ua-cam.com/video/sv5VSBMuQOM/v-deo.html
DRONE VALLEY!!!
Drone valley good little dron as well
So you don't need ELRS compatible remote for this kit? I'm confused because the website say you can get ELRS or TBS with this kit
@ check out you just select the PNP version - PNP will work with the DJI eco system
PNP = Plug and Play
Will show you when I go live later
betafpv.com/products/pavo25-v2-brushless-whoop-quadcopter?variant=40340088651910
Very good video!
Thanks a bunch..
Does the drone come with the DJI O3 Air Unit or do you have to buy it seperately? (Also don't judge me if he said it in his video, I skipped a lot of parts)
No worries it's fine. That's why this channel was put together. Most forums and other FB Groups were roasting the new guys.. You have to buy the 03 air unit separately. The GepRC Cinelog 20 comes with everything. Pavo Pico is a great 1st FPV drone if you're first starting out.
New video next week on adding GPS to Povo Pico unit and getting it to work - setup is totally different with this chip in beta flight..
Drone Valley sounds interesting.. Have you seen an issue with the Pavo Pico where it doesn't display the correct per cell voltage in the OSD?
Yeah - it drains so fast and over heats which makes it really hard to QA and get some real time metrics
Plan to test it again because it would really come in handy to see real time battery 🪫 stats before it falls from the sky
New video next week on adding GPS to Povo Pico unit and getting it to work - setup is totally different with this chip in beta flight.. Change to battery setting too.
hello, tbs or elrs ???
@@ToniHecht elrs.. everything here is plug and play
Nice Video. I would like to Fly the Pavo Pico with a DJI Integra and and the normal dji transmitter. There are two options which you can buy. 1. : expresslrs 2.4g or 2.: tbs. Which one is the right one?
The ones that I have in my videos are expresslrs 2.4g, DJI 03 VTX
DJI Integra Goggles, and DJI FPV remote controller 2… hope this helps
betafpv.com/?sca_ref=4346145.dmpY2kV6BJ
I need help! I followed all your setup but the controller just wont work. it Paris fine with the 03 unit but doesn't respond to arming or any commands.
Sorry tad late. Created this video. Everything happens in real time. No edits. Possible that you might have version 2 of the pavo pico. In that case you would be suing UART 5 not UART 6
ua-cam.com/video/jeEEq_CaN7I/v-deo.html
I have a question.I wanna buy the cinebot 30 fpv drone, and I don't know what to buy. I think I need to buy the DJi goggles V2 and the dji remote 2 If you can please send me a link and also I really like your videos.
Hard to say you will need DJI Goggles 3, and RC 3. They work with it and you will future proof your investment. all the new 03 stuff is now backwards compatible..
Will send the links in a bit watch this .. Hope this helps. Let us know how it goes...
ua-cam.com/video/wLiHbIsCPAk/v-deo.html
Thank you so much. Also I just asking if I need to Change the Settings in betaflight. And do I need to buy Express lrs or TBS crossfire or other ones.
@@IvanRebkovets Sorry thought you saw the live show.. Was able to answer this. everything here is PNP so the plug and play version should do the trick. 18:00 I try to explain.. Let me know if this helps.. ua-cam.com/video/nZDc6nf2zCo/v-deo.html
Thank you so much. But I still have one more question. When I go to geprc when I Choose the Option pnp It. It says it
Comes with no receiver. Is that normal? Will it still bind? Or do I need to buy a Receiver. Anyways, just let me know. Thank you for the video.
Watch from 5:00 min on
ua-cam.com/video/7cCrUH8ktUc/v-deo.html
Great tutorial. However I can hear the audio only on the left speaker after 1:46
hmm - not sure.. just checked on my end.. Aside from the audio clipping - seems fine.. Could be setup - on my computer it's fine. Will check headphones. One sec..
Yeah thanks a bunch - just checked.. Real bummer - just tried with my wireless headphone.. Seems to come out on both speakers on the computer but if you're using wireless headphones you only hear it through one ear. Strange because it was recorded in stereo.. Will try and trouble shoot this. Thanks again.. Would have never known. Have to reach out to the folks at DJI apparently the mic is set to stereo but not recording audio correctly.
Drone Valley
Included you in yesterdays contest. Someone else one last night. But no one claimed last weeks prize. If no one claims this weeks winning there will be another drawing next weekend. .
Hook me up with a drone mic!!!😊
Is it PNP?
Yup - it’s PNP.. hope this helps
Right cause I bind my 03 unit with the dji controller and the integra goggles. All updates on the save firmware but there is no signal on the receiver tab in beta flight.
I followed all the procedures in your video even set in CLI sbus bud fast but still no signal on the receiver.
Is there anything I’m missing?
@@Blackminion-j9m you might want to try the troubleshooting video.. hope this helps
ua-cam.com/video/LEw5Gha1eRo/v-deo.htmlsi=zPDvvjJFToqX93zt
Drone Valley
Drone Valley
Hook me up with a drone mic!
4 more comments to make it an even contest 🙃
You didnt build the drone...you got it pre-assembled!!!! Would have been a good vid if youd have actually covered the frame build
Good point.. There are actually 4 videos where there is step by step in rebuilding the drone scratch.. Hope this helps..
You can see more of the frame as the drone is rebuilt and soldered back together. Best thing about these flight controllers is that the motors don't need configuring..
Hope this helps - next month we'll be building a different drone from scratch..
ua-cam.com/video/Mg-KHnlJf9Q/v-deo.html
Hope this helps. The build from scratch was done live and broken up into many videos.
Part 1 - Building Pavo from scratch
ua-cam.com/video/DcniZz1BN3s/v-deo.html
Part 2 - Building Pavo from scratch
ua-cam.com/video/Mg-KHnlJf9Q/v-deo.html
Part 3 - Building Pavo from scratch
ua-cam.com/video/Zt0PNl30I0c/v-deo.html
Part 4 - Building Pavo from scratch
ua-cam.com/users/livespZ2kFAaywM
Solder LEDs - Building Pavo from scratch
ua-cam.com/video/yzHsdqTBy5M/v-deo.html
Troubleshooting - Building Pavo from scratch
ua-cam.com/video/LEw5Gha1eRo/v-deo.html
Tear down - Building Pavo from scratch
ua-cam.com/video/_WmvOH2fsss/v-deo.html
All i want is to see how the dissassembled frame kit goes together.
@@da33ie That would probably be the video at the bottom. the tear down... But if that's not enough - can do an updated teardown tonight.. Live later in the evening.
Part 1 - Building Pavo from scratch
ua-cam.com/video/DcniZz1BN3s/v-deo.html
Part 2 - Building Pavo from scratch
ua-cam.com/video/Mg-KHnlJf9Q/v-deo.html
Part 3 - Building Pavo from scratch
ua-cam.com/video/Zt0PNl30I0c/v-deo.html
Part 4 - Building Pavo from scratch
ua-cam.com/users/livespZ2kFAaywM
Solder LEDs - Building Pavo from scratch
ua-cam.com/video/yzHsdqTBy5M/v-deo.html
Troubleshooting - Building Pavo from scratch
ua-cam.com/video/LEw5Gha1eRo/v-deo.html
Tear down - Building Pavo from scratch
ua-cam.com/video/_WmvOH2fsss/v-deo.html
Here you go. Tear down and reassemble
ua-cam.com/video/isdThhvBXyA/v-deo.html