2000 Kawasaki Vulcan 1500cc: Cam Chain Tensioner Upgrade/Mod
Вставка
- Опубліковано 9 лют 2024
- The purpose is to extend the engine's life and prevent catastrophic failure. Also, we had a small chain slapping inside the engine. This motorcycle has 42,000 kilometers on it and runs extremely well.
Link to the Cam Chain Tensioner Upgrade.
www.amazon.ca/Tensioner-Exten...
This is the best video of this mod that I've seen yet! Outstanding! Moto Dans did a good one; yours is GREAT! I have a 2003 Mean Streak that I needs this, and your video is all I'll need. Thank you, thank you!!! Well done.
Super happy that we can help. Thank you.
Did you have apply tension to the chain in some way so it didn't lose position while the tensioner was out?
No, you do not have to, the chain hangs there, do it slow and you'll be fine.
It is actually possible to remove the tensioner without popping the tank off. Just cut an allen key about 12mm so you can use it in the tight space under the snorkel.
Honestley I am not sure, I could be possible if it is please make a movie. Thank you.
@@weron021 i just did the mod myself on a 98 Classic Tourer, its a bit tough but i even did it without cutting an allen key.
@@Venoxis Excellent happy for you.
@@weron021 Thank you for the video, greetings from Germany !
@@Venoxis Thank you from Canada.
You can do both without removing the tank or exhaust for real easy peazy job
That was our first time doing this, will you be able to make a video of how you did it without removing the tank and the exhaust. Please send me a link. Thank you.
I just finished mine without removing the exhaust or moving the cross over tube. The front tensioner was definitely a pain but it wasn’t terrible!
@@raygos17 excellent, and thank you for the feed back.
Can the cam chain tensioner be rebuilt before you put it back on the bike or is spacing a problem. I’m having a problem reconnecting the cap back on the tensioner due to the oil hose being in the way
It is the spacing problem, That is why we added spacer to it. Take your time with this. Hopfuly this helps out.
Thanks for the answer. One last one. I had to turn the cam chain tensioner at an angle to get it in. I have not turned it on, would that do any damage?
What ever you do do not turn the bike on with out the tentioner installed. Just have a look at the video and follow the instructions. Also what ever angel you took it out that is the angel it will have to go in. If not there is a potential for the damage. @@GRPPLRJORDAN
Another Cory H appearance?
Hi! How much millage has the bike?
42K
Where to get those part's?
You get them on Amazon. www.amazon.ca/Tensioner-Extenders-Kawasaki-Vulcan-Suzuki/dp/B08FMGKJFP?fbclid=IwAR2J2_ymwfFw69_fuSOuWz8v-rnyGkoSi6ENqJVOo3HBdfSzsvMHyIreII0
What’s the purpose of the mod?
The purpose is to extend the engine's life and prevent catastrophic failure, Also we had a small chain slapping inside the engine.