GEPRC Cinelog35 v2 Analog to Walksnail Avatar Pro Kit Conversion | Drone FPV Indonesia, Balikpapan
Вставка
- Опубліковано 29 тра 2023
- #geprc #cinelog35 #dronefpv
Semoga video ini bermanfaat, jikalau masih ada yang kurang mengerti, bisa ditanyakan di kolom komentar yaa!
Link Pembelian Cinelog35 v2 Analog
(Jika stok masih ada)
tokopedia.link/OmQUwr4edAb
Cinelog35 v2 03 Air Unit Version
tokopedia.link/1U5Zy86edAb
Walksnail Avatar Pro Kit
tokopedia.link/CC1srOQPeAb
Walksnail Avatar v2 Kit
tokopedia.link/AelxWCXPeAb
Diatone 5v/9v 2A Micro BEC
tokopedia.link/7HWpjF8PeAb
Camera : Iphone 13
Thanks for watching!
Feel free to ask...
Terima kasih telah menonton!
Jangan sungkan tuk bertanya ya...
#walksnail #walksnailavatar
kerenn om..
Om main rc adventure lagi dong🙏
masih main kok, cmn tunggu aja ya
Oke om😊
Ini nih.. urusan harus bisa ngoprek sendiri kalau mau terjun ke dunia fpv yang bikin saya jadi mikir-mikir lagi.. 🤣
iyaa betul om, selain siapkan dananya, siapkan skill oprek mengoprek terutama soldering semisal ada trouble, sisanya programming drone nya sendiri masih bisa dipelajari banyak di youtube
hadir om, untung nya saya ada komunitas di tempat saya. jadi kalau oprek2 minta tolong ke mereka.. wkwkkw..
saya cuma pande terbang dan di system aja, nyolder2 urusan kawan2..
:(
@@dailydronejourney syukur kalo ada teman komunitas, bisa meminimalisir hal yg tidak diinginkan jika dibandingkan kita tidak pnya teman komunitas
How did you get the avatar v2 vtx to fit? The corners of my VTX won't clear the stand offs for some reason.
i just fit the avatar vtx where it's possible to mount, i'm just using 2 25x25 case screw to hold it on the frame, not using the 20x20 because as you said, it won't work
Bang kasih setingan rate yang pas dong buat cinematic biar smoot
apply preset aja di betaflight ada, kalo saya rate freestyle soalnya jadi sesuaikan kenyaman
Bang boleh kasih tutorial nya engga bg.soalnya saya pemula banget🥺
I saw your video well. I also want to change analog to o3 air unit. but I just had thought that it is changable. but in your clip, you are using BEC for VTX(walksnail). Then Do I also have to using BEC for o3 air unit when installing on cinelog35? if right, which BEC do I have to use? could you recommand for me??
i think for O3 air unit, you can just plug it directly to the "Air unit ready plug" where it's using VBAT like from the GEPRC factory also.
The reason i'm using BEC for my walksnail because i'm too afraid to burn my VTX if i give them 6s voltage, so i better use a BEC to play safe.
But i think for 03 Air unit you can just plug it directly to the plug that AIO has
@@keyrclife thanks
Untuk gpsnya bisa lancar nge-lock satelit tdk om, dengan posisi fc dan vtx walksnail seperti itu?
itu kan pas saya buat video test fly cinelog ini ngelock aja tuh, padahal gps masih chip m8, kalo pakai m10 bisa lebih cepet lagi
keren om, BTW untuk hd pro yg gunakan VTX v2 32 GB apakah semua sudah support gyroflow atau hanya pad seri2 tertentu saja?
yang saya tau support gyroflow itu pada varian VTX 32gb, data gyroflownya itu dari kamera. VTX hanya sebagai storage
@@keyrclife brrt yg HD pro V2 yg 32 giga semua sudah support gyroflow ya?
@@tabalaistation8944 iyaa betul
@@keyrclife thanks infonya om
Berapa duita kang.ngrakit dron ky gitu.🙏🙏🙏🙏🙏🙏
drone nya saja 6jt an