Each design is different and Auto Digitizing can be useful to get you started. Sometimes it comes out perfect. I generally auto digitize first and tear apart what isn’t right, and manually digitize those areas. Using both methods is the best, especially if you have a tricky or large design.
Congratulations on your new machine! If you haven't already, be sure to join our Facebook support group, Embroidery and Custom Apparel Mastery! facebook.com/groups/embroiderymastery
Hi there, thanks so much for watching and for all the love. Please consider subscribing to our channel if you haven't done so already so that you're notified when we post new videos!
Manual digitizing is obviously the way to go, but learning Chroma Luxe is a huge undertaking. This video was fairly helpful, but leaves me looking for more info on how to actually do manual digitizing.
Glad this was helpful! Congrats on winning the giveaway by the way! Could you please send us a message through our Instagram so we can send you the prize? @ricomahq. Thank you!
No matter how many times we click the wand and specific spot on the design, we never get the same result as you. It always makes a box over the whole design instead of the actual piece. Like yours highlights the helmet and changes it. Ours doesn't highlight until after the fact and just makes a box the length of the design. Is there a step, we're missing?
@@ricomatv Yeah, backdrop image (png) then the complex fill, then the wand is selectable, select the wand and go to click on the design and here's where ours always differs from yours.. Yours you're able to click on the spot and then right click off the design. As soon as we click on the design it spins (like loading and kinda takes a minute) then it gives us an entire box. So, you're able to right click off the the design and we're not. It highlights a box around the entire design instead of just the spot we click on, no matter which part of the design we click on. We're in luxe as well, we have checked for updates, consistently. But, just doesn't do what yours does. We've uninstalled and re-installed and still don't get the same option or outcome as you.
You would have to digitize it manually cause auto digitized letters never really come out right. It's always best to manually digitize lettering just I'm case you get the client that has a custom font. Some have close fonts to what the client sends but most all customers want the font they sent in with the design. Here he manually digitized and auto digitized.
Goodnight friend. I made a purchase of an embroidery machine with you, but the chroma inspire does not have all the tools that you explain. what should I do.?
Our Chroma software comes in three different tiers: Inspire, Plus, and Luxe. Chroma Luxe, the tier being used in this video, is the highest tier and includes a variety of additional digitizing tools, file functions, and fonts. This tier is a great option if you anticipate receiving a lot of specialized embroidery requests.
Difference between a cheap digitizer and an expensive one right here. We use Chroma Luxe at my company and never use auto digitize unless it's a very basic design, and even then we still clean it up after.
Any suggestions for a good digitizer company to use… we’re new to it and still subbing out our digitizing… I just feel like the one we’ve been using there’s been some good work but some of it just isn’t quite right and I feel could be better and have cleaner nicer lines…. It’s just been hit or miss with them
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! We have approved digitizers on the files section. facebook.com/groups/embroiderymastery
Is this software is easy from wilcom E.2 for comparison of trims? because we need to do it manually in wilcom and I saw you that you're doing it by just doing some one or two clicks. Please explain it.
Hi there, if you wanted some tips/tricks please reach out to the service team so they can walk you through our Chroma software ---> ricoma.com/US/contact-us
Hi there, thanks so much for watching! Depending on the tier of Chroma that you have, you can select only certain parts of your design to be auto-digitized. Hope this helps!
@@ricomatv Hi well I have Chroma Luxe, can you show me how to assign what part of the design I want to be fill stitch and how I can assign what to be satin, that will help a lot or if you can make a short video about this very well explained please. Thanks
Very New to Chroma but have experience with other types of Software. I found this a little difficult to follow trying to see what icons your choosing since you pointer is so small and moves too fast. I find myself replaying over and over trying to pick out details. But that's just me. Overall the content is good.
Thank you for the feedback, we truly appreciate it! We will be sure to pass this over to the team. In the meantime, have you checked out Chroma's UA-cam channel?
I got a mt1501.. With chroma plus.. I have no idea what the basics are so none of these videos help me.. Even the basic webinars are not helping because I need the basics.. For example.. I import a picture... I put a few squares and dots to digitize but then I make a mistake on a dot.. I can't delete that dot without deleting all dots.. I have no clue how or what... Now I'm stuck until I find a way.. I've seen someone right click and delete dot.. That doesn't work for me and I don't know why... The crazy part is.. I taught myself to build computers but I can't figure out a simple deleting of a dot.. I need resources to start from baby steps so I can learn faster.. Other wise it's gonna take me hours upon hours to learn one thing by myself... These people talk way to fast..these videos are for people that have the basics.. Where is the videos for us new people..
32 años de experiencia. No se puede decir que es digitalizacion manual si usaste alfabeto del programa. Como en todo trabajo, si quieres hacerlo bien, tomate tu tiempo.
Hi Jessie. We appreciate the feedback, and recommend for you to check out our description box in which has a summary of the video. If you have further questions, please reach out.
Each design is different and Auto Digitizing can be useful to get you started. Sometimes it comes out perfect. I generally auto digitize first and tear apart what isn’t right, and manually digitize those areas. Using both methods is the best, especially if you have a tricky or large design.
Hi there, thanks so much for watching. Auto-digitizing is great for those just starting out for sure!
Awesome can't wait to get my machine this is amazing I can't wait to get my machine and get started in this July 23
Congratulations on your new machine! If you haven't already, be sure to join our Facebook support group, Embroidery and Custom Apparel Mastery! facebook.com/groups/embroiderymastery
I love watching this guy channel please make more😍
Hi there, thanks so much for watching and for all the love. Please consider subscribing to our channel if you haven't done so already so that you're notified when we post new videos!
Thank you for this video
I like the auto digitising
One do you do auto Videos separate
Hi! Thanks for watching, we currently have manual digitizing videos but we will be sure to pass this on to the team!
I never thought the designs would look so different. It's great to have the auto-digitizing feature but now i know it's limitations. Thanks!
Happy to help!
Video is much appreciated
Glad you enjoyed it!
Manual digitizing is obviously the way to go, but learning Chroma Luxe is a huge undertaking. This video was fairly helpful, but leaves me looking for more info on how to actually do manual digitizing.
Glad this was helpful! Congrats on winning the giveaway by the way! Could you please send us a message through our Instagram so we can send you the prize? @ricomahq. Thank you!
Hi! What is the name of that software
Hi! This is Chroma > www.chromaembroidery.com/
How do you import your image I am struggling trying to find that out.
Hi there! Import a digitizing file?
hi... is this chroma luxe software free with Ricoma machine
Hi there! If you are in the US and make a machine purchase with us, the machine comes with Chroma.
No matter how many times we click the wand and specific spot on the design, we never get the same result as you. It always makes a box over the whole design instead of the actual piece. Like yours highlights the helmet and changes it. Ours doesn't highlight until after the fact and just makes a box the length of the design.
Is there a step, we're missing?
Hi Angel! Are you following the steps that are shown here? ----->ricoma.zendesk.com/hc/en-us/articles/9965183597331-Magic-Wand-In-Chroma
@@ricomatv Yeah, backdrop image (png) then the complex fill, then the wand is selectable, select the wand and go to click on the design and here's where ours always differs from yours.. Yours you're able to click on the spot and then right click off the design. As soon as we click on the design it spins (like loading and kinda takes a minute) then it gives us an entire box. So, you're able to right click off the the design and we're not. It highlights a box around the entire design instead of just the spot we click on, no matter which part of the design we click on. We're in luxe as well, we have checked for updates, consistently. But, just doesn't do what yours does. We've uninstalled and re-installed and still don't get the same option or outcome as you.
@ricomatv so... we just figured it out. It will not work with a png, only a jpg or jpeg.
Is not possible to have the font of the RICOMA text the same as in the original design?
With Auto Digitizing?
@@ricomatv either way
You would have to digitize it manually cause auto digitized letters never really come out right. It's always best to manually digitize lettering just I'm case you get the client that has a custom font. Some have close fonts to what the client sends but most all customers want the font they sent in with the design. Here he manually digitized and auto digitized.
Goodnight friend. I made a purchase of an embroidery machine with you, but the chroma inspire does not have all the tools that you explain. what should I do.?
Hi there. Did you purchase your machine outside of the US?
@@ricomatv no. I am in Columbus oh
Our Chroma software comes in three different tiers: Inspire, Plus, and Luxe. Chroma Luxe, the tier being used in this video, is the highest tier and includes a variety of additional digitizing tools, file functions, and fonts. This tier is a great option if you anticipate receiving a lot of specialized embroidery requests.
Difference between a cheap digitizer and an expensive one right here. We use Chroma Luxe at my company and never use auto digitize unless it's a very basic design, and even then we still clean it up after.
You are absolutely right, the results are very different!
Does demo digitize so I can see quality before downloading?
Hi Leeto. You can also check out Chroma our digitizing software's UA-cam channel in which can help you.
ua-cam.com/users/ChromaDigitizingSoftware
Any suggestions for a good digitizer company to use… we’re new to it and still subbing out our digitizing… I just feel like the one we’ve been using there’s been some good work but some of it just isn’t quite right and I feel could be better and have cleaner nicer lines…. It’s just been hit or miss with them
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! We have approved digitizers on the files section. facebook.com/groups/embroiderymastery
Thank you! I’ll go join!
Is this software is easy from wilcom E.2 for comparison of trims? because we need to do it manually in wilcom and I saw you that you're doing it by just doing some one or two clicks. Please explain it.
Hi there, if you wanted some tips/tricks please reach out to the service team so they can walk you through our Chroma software ---> ricoma.com/US/contact-us
Can you just import paths straight from Adobe Illustrator?
Hi! Unfortunately, this won't be possible.
Hello, I have Chroma Lux but the Magic Wand tool is turned off without being able to use it, HELP MEEE :D
Hi there! Please submit a ticket with the team so they can look into this ---> ricoma.com/US/support
How do you change the line width on Chroma Inspire?
Hi Jenny, You can do this by increasing the stitch density!
Can you pre-set the auto-digitizing? in that way you won't have different kind of stitching to edit, can it be more accurate?
Hi there, thanks so much for watching! Depending on the tier of Chroma that you have, you can select only certain parts of your design to be auto-digitized. Hope this helps!
@@ricomatv Hi well I have Chroma Luxe, can you show me how to assign what part of the design I want to be fill stitch and how I can assign what to be satin, that will help a lot or if you can make a short video about this very well explained please. Thanks
In this video we show you how to do that. You right click and pick the stitch type to convert to
Why does your realistic view look so much nicer then mine? I have chroma lux
Hi Justin, we recommend contacting customer support so they can help ---> ricoma.com/US/contact-us
Hola
Porque las gorras no te rebotan al bordar ? Si tengo misma bordadora y bastidor? Y a mi si
Lamentamos mucho que esté teniendo esos problemas. ¿Qué tipo de tela estás usando? Hay diferentes factores que pueden causar saltos de puntada.
Watching the auto and manual digitizing, I think there should be a way to combine both to save time and achieve a better result.
Yeah some people do auto first and then edit manually based on top of that
Very New to Chroma but have experience with other types of Software. I found this a little difficult to follow trying to see what icons your choosing since you pointer is so small and moves too fast. I find myself replaying over and over trying to pick out details. But that's just me. Overall the content is good.
Thank you for the feedback, we truly appreciate it! We will be sure to pass this over to the team. In the meantime, have you checked out Chroma's UA-cam channel?
I got a mt1501.. With chroma plus.. I have no idea what the basics are so none of these videos help me.. Even the basic webinars are not helping because I need the basics.. For example.. I import a picture... I put a few squares and dots to digitize but then I make a mistake on a dot.. I can't delete that dot without deleting all dots.. I have no clue how or what... Now I'm stuck until I find a way.. I've seen someone right click and delete dot.. That doesn't work for me and I don't know why... The crazy part is.. I taught myself to build computers but I can't figure out a simple deleting of a dot.. I need resources to start from baby steps so I can learn faster.. Other wise it's gonna take me hours upon hours to learn one thing by myself... These people talk way to fast..these videos are for people that have the basics.. Where is the videos for us new people..
Hi, we recommend attending your training that is included with your machine. Please log in to your customer portal and sign up for training.
Try the delete button or backspace. I have chroma the basic one and that’s how I remove it.
Wish y’all showed prices without having to give all my contact info. I already get tons of ricoma emails
HI Barbara, thanks so much for watching. What machine are you interested in?
@@ricomatv one for sublimation
Hello. I am a designer. But I work with wilcom program. I do not work with auto design. The name of my pattern machine is Fortever. You like it.
Thanks so much for watching. we hope you enjoyed the tutorial.
@@ricomatv
Hello. How can I contact you? How much do embroidery machines cost?
For some of the new bees to the digitizing game you might have to slow down a little thank you
Hi there, we appreciate the feedback!
32 años de experiencia. No se puede decir que es digitalizacion manual si usaste alfabeto del programa. Como en todo trabajo, si quieres hacerlo bien, tomate tu tiempo.
Gracias por tu sugerencia, Javier!
I am interested in school logos
Thanks for the suggestion!
I try to follow you , but your talking to fast and I’m trying to learn🤷🏻♀️
Hi Jessie. We appreciate the feedback, and recommend for you to check out our description box in which has a summary of the video. If you have further questions, please reach out.
@@ricomatv thank you for answer. Another ?, I have the Chroma Luxe but the signs for align don’t show up. What I need to do?