The Do's & Don'ts of Digitizing for Embroidery

Поділитися
Вставка
  • Опубліковано 1 лют 2025

КОМЕНТАРІ • 77

  • @ricomatv
    @ricomatv  2 роки тому

    What are some digitizing do's you recommend? Comment some below!

  • @Nexus_619
    @Nexus_619 Рік тому +4

    Spent the last 2 months researching embroidery and digitizing in particular and I think I’m ready to pull the trigger on a Ricoma machine.

    • @ricomatv
      @ricomatv  Рік тому

      We are so glad to hear this! Please let us know if you need any help :)

    • @richardlfd135
      @richardlfd135 Рік тому

      Do your research before making a decision you may regret.

  • @gremlin7900
    @gremlin7900 2 роки тому +8

    Practice with some designs you enjoy, but keep it simple till you get the hang of it, then ask a few friends for fun ideas that would make no sense and do them any way. You might stumble on a new idea or issue that will be random but helpful. I got sent a cat meme and asked about waffles, the picture was dark so I had to spend extra time redesigning the image to fit a quality that was printable and then the words to fit into my 4x4. was a fun challenge of sorts but after 5 hours on Hatch 3 I'm confident in almost any simple designs.

    • @ricomatv
      @ricomatv  2 роки тому

      We appreciate your input and wish you luck on your journey!

  • @decalproject
    @decalproject Рік тому

    Just got our Ricoma FPA-1208, Decal Project from Mindanao, Philippines.

    • @ricomatv
      @ricomatv  Рік тому

      Welcome to our family!

  • @dothedoword
    @dothedoword 10 місяців тому

    whats a good density for fill stitches in mm? and for satin stitches?

    • @ricomatv
      @ricomatv  10 місяців тому +1

      Hi!
      For fill stitches:
      -A common range for fill stitch density is around 5 to 12 stitches per inch (SPI).
      -For lighter fabrics or more intricate designs, you may want to use a higher density (e.g., 8 to 12 SPI).
      -For heavier fabrics or simpler designs, a lower density (e.g., 5 to 8 SPI) may suffice.
      For satin stitches:
      -Satin stitches, being a type of decorative stitch used for outlining or detailing, typically have a higher density than fill stitches.
      -A typical range for satin stitch density is around 7 to 15 stitches per inch (SPI).
      -Satin stitches with higher densities (e.g., 12 to 15 SPI) result in smoother and more solid lines, ideal for fine details or lettering.
      -Lower densities (e.g., 7 to 10 SPI) can be used for broader satin stitches but may appear less smooth and solid.

  • @workouttomybrain6064
    @workouttomybrain6064 5 місяців тому

    Im not a ricoma customer.i already bought a machine .now i recently came to know ur channel.is it possible for non ricoma customers to learn this ?

    • @ricomatv
      @ricomatv  5 місяців тому

      Of course! Plenty of have that

  • @yundaz
    @yundaz 4 місяці тому

    I would like to know if its possible to do embroidery on a thick yarn with a large gauge and see the capabilities of the software and a real test result.

    • @ricomatv
      @ricomatv  4 місяці тому

      The largest needle you can use on our machines is a size 90. Thick Yarn will not work if it cannot pass through the eye of the needle.

  • @stayfocuseddi
    @stayfocuseddi 2 роки тому

    Thanks again for the great tips!!

    • @ricomatv
      @ricomatv  2 роки тому

      You are so welcome!

  • @elmondo033057
    @elmondo033057 9 місяців тому +1

    Excellent, my friend! Thanks so much!

    • @ricomatv
      @ricomatv  9 місяців тому

      Thank you too!

  • @queenakinlaja
    @queenakinlaja 8 місяців тому +1

    I bought 2 ricoma machines from you I don't know how to start please help me

    • @ricomatv
      @ricomatv  8 місяців тому

      Of Course. Please go to your customer portal and take the pre-training classes. Once they are complete, you can then set up an online training session with one of our specialist.

  • @tajuana_on_a_mission
    @tajuana_on_a_mission 2 роки тому +4

    OMG this seems so overwhelming but looking forward to learning.

    • @ricomatv
      @ricomatv  2 роки тому

      We got you every step of the way! Congrats on starting this journey :)

  • @cptsquish
    @cptsquish Місяць тому

    Please explain "loss of registration". Is this pulling of material?

    • @ricomatv
      @ricomatv  Місяць тому

      Hi! Here is a good resource > support.ricoma.com/hc/en-us/articles/360045464973-Losing-Registration#:~:text=%2DIf%20it%20goes%20too%20far,it%20is%20Electrical%20in%20nature.

  • @queenakinlaja
    @queenakinlaja 8 місяців тому

    Hello sir I bought 2 recommended from you but don't know how to start

    • @ricomatv
      @ricomatv  8 місяців тому

      Of Course. Please go to your customer portal and take the pre-training classes. Once they are complete, you can then set up an online training session with one of our specialist.

  • @cptsquish
    @cptsquish Місяць тому

    Why would one need to choose a jump stitch over a trim stitch?

    • @ricomatv
      @ricomatv  Місяць тому

      Choosing a jump stitch over a trim stitch helps maintain design continuity, protect delicate fabrics, speed up production, ensure a cleaner backside, and reduce the risk of threads unraveling, especially in closely spaced elements, while trim stitches are better suited for larger gaps to avoid visible threads.

  • @KaiBuskirk
    @KaiBuskirk 8 місяців тому

    Nice Machines! I’d love to add them to the our network platform

    • @ricomatv
      @ricomatv  8 місяців тому

      Hi Kai! Let us know if you have any questions, we would love to help!

  • @samkelomtolo5815
    @samkelomtolo5815 Рік тому

    I bought my Ricoma machine but didn't get the Chroma Digitizing Software package... how will you assist me?

    • @ricomatv
      @ricomatv  Рік тому

      Hi there, are you located in the US?

    • @janekubiita501
      @janekubiita501 3 місяці тому

      I recently bought my Ricoma machine, the Chroma Digitizing Software package didn’t come with it though.
      Can I be assisted?
      I’m from Uganda..

  • @RegimasterGurure-q1e
    @RegimasterGurure-q1e 3 місяці тому

    hi which app to design 3D objects embroidery help me

    • @ricomatv
      @ricomatv  3 місяці тому

      You can use Chroma to make 3D puff designs

  • @DRRLBNY
    @DRRLBNY Рік тому +1

    Thanks for sharing

  • @TheBestUni
    @TheBestUni 4 місяці тому

    Thank you

    • @ricomatv
      @ricomatv  4 місяці тому

      Glad we were able to help!

  • @reviewquickie6263
    @reviewquickie6263 2 роки тому

    Hi henry. Im interested to start an embroidery business. Maybe I could ask you some questions? Thank you.

    • @ricomatv
      @ricomatv  2 роки тому

      Go ahead and ask away!

  • @jaycorleone3708
    @jaycorleone3708 2 роки тому +1

    I want to buy a machine and start. Seems overwhelming though

    • @ricomatv
      @ricomatv  2 роки тому

      Hi! We try our best to be there every step of the way, we provide the training when you purchase a machine with us! Please submit a request with the team so they can help you get started -----> ricoma.com/US/contact-us

  • @niradnahguav
    @niradnahguav Рік тому +1

    2:32 Nice to see my school represented!

    • @ricomatv
      @ricomatv  Рік тому

      Nice! Thanks for watching!

  • @crystalswandesign
    @crystalswandesign 2 роки тому

    Interested in EM-1010. When I try to request a quote on your website, it says my phone number is not in range(?). It does not let me submit.

    • @ricomatv
      @ricomatv  2 роки тому

      Hi there! Please send us a message with your contact information on our IG so we can help! --->@Ricomahq :)

  • @antonioramil2779
    @antonioramil2779 10 місяців тому

    How much digitalize software?

    • @ricomatv
      @ricomatv  10 місяців тому

      Hi! Check out the prices through here > ricoma.com/US/software/chroma

  • @7djtriples
    @7djtriples Рік тому

    WHAT IS THE BEST FREE SOFTWARE ? i CANT FIND ANY TO DO MY OWN DESIGNS

    • @ricomatv
      @ricomatv  Рік тому

      Hi there! We recommend using Chroma! The software is designed to allow both the novice and experienced digitizer to create even the most intricate designs with ease and speed. Become a digitizing pro in no time with an easy-to-use interface, built-in styles, and customization tools!

  • @KaiBuskirk
    @KaiBuskirk 8 місяців тому

    Thanks !

  • @errolsmith5634
    @errolsmith5634 2 роки тому +9

    "...Chroma digitizing software comes with your embroider machine package..." That statement is some what disingenuous. You need to interpolate " based on your region of purchase" Good content as usual tho.

    • @ricomatv
      @ricomatv  2 роки тому

      We appreciate the feedback!

  • @vaggelispousias
    @vaggelispousias 8 місяців тому

    i have a problem with chroma inspire

    • @ricomatv
      @ricomatv  8 місяців тому

      Hi there! Can you please provide us with more information?

    • @vaggelispousias
      @vaggelispousias 8 місяців тому

      hello, I have a problem with the design program (chroma inspire) when I do auto digitizing in my program it outputs 2 colors and in my embroidery machine it reads 95 colors as a result it cuts the thread continuously
      my export becomes dst

  • @QapıPəncərə
    @QapıPəncərə Рік тому

    What is programe name? Please

    • @ricomatv
      @ricomatv  Рік тому

      Hi! It's Chroma > ricoma.com/US/software/chroma

  • @badiilham4382
    @badiilham4382 2 роки тому

    I want to buy an embroidery machine can I help I am in Morocco

    • @ricomatv
      @ricomatv  2 роки тому

      Hi there! We would love to help, please submit a request with the team through this link ---> ricoma.com/US/contact-us

  • @ku_hunar_rd2687
    @ku_hunar_rd2687 2 роки тому

    subscribed 😅

    • @ricomatv
      @ricomatv  2 роки тому +1

      Welcome to the family!

  • @thedarkness2646
    @thedarkness2646 Рік тому +1

    I am having a hard time justifying the Luxe version of the software. I dont want to spend that much money and then have a hard time learning and having to spend money having people digitize for me.

    • @ricomatv
      @ricomatv  Рік тому

      Hi there, did you need help with training?

    • @thedarkness2646
      @thedarkness2646 Рік тому

      @@ricomatv it's not so much the training. It's the cost of luxe. I don't know if I want to spend that much money to find that it's not as full featured as other programs. $1400 is a lot as a single payment.

    • @AS-oj3cw
      @AS-oj3cw 9 місяців тому

      I do!! ​@@ricomatv

  • @manzargazala9820
    @manzargazala9820 Рік тому

    Subscrided

  • @johndoeee888
    @johndoeee888 Рік тому

    If luxe version had a monthly payment. That would be awesome. Instead of paying it all 1 time.

    • @ricomatv
      @ricomatv  Рік тому

      Hi! You can actually finance the Chroma software through a third party at checkout!

  • @mohibsiddiqui1440
    @mohibsiddiqui1440 8 місяців тому

    hello all i m digitizer

    • @ricomatv
      @ricomatv  8 місяців тому

      What Software do you use?

  • @a.rmetref2603
    @a.rmetref2603 Рік тому

    I didn't get the Chroma digitizing software with my Ricoma and the customer service is not helpful at all with the Issue, it's been almost a year now this is really frustrating

    • @ricomatv
      @ricomatv  Рік тому

      Hi there! We are so sorry to hear this, are you located in the US?