Fast & easy way to change electric scooter tubeless Tyre - Dualtron Thunder, Nami Viper, Kaboo
Вставка
- Опубліковано 15 жов 2024
- In this video I'm going to show you how to easily change electric scooter (Dualtron Thunder) tubeless Tyre. I already change the back wheel watching some online videos and felt more difficult so I decided to post a video about it. The more difficult part I found is inflate the Tyre. I use wheel's centrifugal force to place the Tyre on the rim. I hope you find it useful and save you much time and manpower.
You made it look easy, man. I was about to jump off the building because of extreme frustration. Thanks for uploading, very clear and well done. I stepped away from the edge because of this
you made this look extremely easy. this is the best video i've seen on changing thunder tire. great job
Man you made this look so easy.
Gonna attempt it tonight
This is a brilliant way, very well thought out man.
Thanks
u make it look easy
Actually first I struggled with the rear one and figured out it can be done without removing the rim, so I made this, I edited it to make it small clip that's it
Good video but…this neither looks fast OR easy. seeing this makes me want to stick with split rim.
This was a split rim… but he did it the old way instead.
Well done harder with better quality tyres
does that not have one of them split rims? like you could of just removed the motor then split the rim, at attach to new tyre
Are these also “split rim” design? So the option of removing half the rim?
Hi , thanks for the vid. Just a question the original tire measurements are 90/60 6.5 and pmt are 100/55 6.5 it works fine? I have the blade gt and i want to upgrade my tires thanks and the originals are same for the dualtron
9:10 hello bro, what kind of air pump is that one ? thanks!
Would be kind to tell me what kind of inflator did you use ? Co2 Sparklet with Schrader adaptor? Any link to provide ?
It is 'Rockbros' one, I bought from AliExpress
what about LED light wires in swing arms i have the dualtron achilleus
Gooooooood job 💪💪💪💪💪
Good video.. Whats the max pressure on the tire
40 psi
Can a tubeless tyre fit on an old Dualteon Ultra?
No
Così stringendo così forte il bullone superiore le cartucce non hanno modo di ammortizzare le disconnessioni stradali
You could just remove the rims directly from the motor and it would be easier to pry those tires once their off from the motor... rim is detachable
Yeah I did that way with rear wheel and found out this way easier than that👍
This guy did not seem to have any issues doing it this method.
@@factcheck5017 Yes the rim bolts have tough threadlock adhesive, so A heat gun or torch can be used to soften the threadlock if need be
gooooooooooooooooooooood
I hate changing tyres, so I have solid, and get repairs to replace them.
I have bent all of my tools and tire is still not on. Crazy how tough this tire I have is
Just heat it little bit and try
@@harenthiran Heating it up did not work. I eventually got it on with great effort but that caused the tire to stretch and it started leaking air because of it lol. Just insanely hard tire
Did you put any tubeless tyre sealent?
This isn't fun at all, but you did good. I'm not as strong as you so I'll need scooter model with split rims.
Mostly split rim has tube, I think you can replace the single piece with split one if you wish. So buy whatever scooter you liked and replace the rim with split one. Enjoy your ride
just try this metod and dont work.
Nice
pmt tire good~
Good
nice inflator,,, but should only use blue locktite not red
At that moment I only had the red one, thanks buddy
this is good but see if you can do it like the asian bloke did by hand without tools. anyone else see that video? im looking right now. nice video!
That would be great to know the trick, please share the link 😉
@@harenthiran I was wrong. You have probably seen the video already. The young asian man has two large lengthy tire levers that seemed to work fine. My tire levers are tiny.
Se vuoi fare un lavoro preciso ritogli i bulloni sia quelli sopra e quelli sotto e ristringi non al max quelli superiori e metti il frena filetto così non perdi i bulloni
Heavy 🤙
USE ANY KIND OF TECHNIQUE THAT
Надевать покрышку без мыла,это извращение!
Yeah that looks easy 😮 nooot
Bro need a bev
omg you're doing this wrong, you need to loose the bolts in the tire, the rims split in half and come off!
This rim is single piece bro
@@harenthiran good video, I guess the newer models have a split rim. I got the Achilleus but have yet to do a tire replacement. I guess I will find out if I have a split rim :-D .... there is no document I can find on it.
@@RajinderYadav it depends on where the model has tubed or tubeless, if it is tubeless it should be single piece rim
I put single piece rims on my victor to run tubeless… split rims suck.