Wow! What can I say. The support from Clifton at PAC support was above and beyond. He "educated" the Car Toys tech, even giving us his cell phone number to connect with him so he could explain to the tech what he already should have known. Yes the On Star steering wheel button can be repurposed to the phone VERY EASILY despite everyone at car toys saying that it could not be done.thanks PAC !!!
I purchased this product along with an aftermarket stereo and installation kit for my Harley Road Glide. I have to admit the paper and website instructions were somewhat unclear or vague to me BUT this video nailed it! After reviewing the video a bit, I got it the first time. Thank you so much!
Great video, however you need to make another called step 1 where you show how to wire the unit into the car. However after reading the instructions a few times I was able to figure out the wiring for my Toyota Aurion (Camry). All good up and running.
I had an excruciating hard time with this install. At one point it felt like I was stuck in a desert with no water and nothing around for miles. Install was on an 03 Monte Carlo. I couldnt figure out how to program the buttons. "Seek by type" and "Preset" were missing from the programming sequence as I had installed a Kenwood HU.
I have a 2003 infiniti g35 & I'm trying to connect the swi-rc to my Dual xdvd210. can you tell me what I connect the blue/white wire (swc) from the swi-rc & where would I connect it to my Dual xdvd210?
Hi I am trying to install a swi x on this same car with same controls..Does the green wire connect to pin A7 at the factory wiring harness?? Also it says to connect pin A6 to a switched 12v. Do I need to cut the pin A6 wire and connect it??
I have a 6.2 inch rockville Dvd, bluetooth, GPS. I can't get the steering wheel controls to work. It will only either go up in volume or down, it won't do both. I have a 2008 Grand Caravan
Hello. Thank`s for your video. I installed Pioneer to Chevy Trailblazer 2006 with PAC RP4-GM11. And I believe wiring was made proper by pro installers. But when it went to button mapping something went wrong. I did all the steps exactly the way you show in your video. Neither default mapping was right nor the programming attempt helped to solve the issue. I the end of the day i draw my Chevy away with total mess at steering wheel butеons: my Mute is missing preset - is the only button and it is on source select button track+ is on preset- and this is it. I would greatly appreciate if you give me an idea on how to fix this.
PAC modules are SOOOO slow to respond to button presses. With the Axxess ASWC, the response is nearly instantaneous, just like it was with the factory radio with my 1998 Olds Regency.
What the hell is a "version" and how do you know which "version" to use? Are you talking about radio brands? If so this thing only supports about a dozen radios and they are NOT listed on the box. What if you don't have one of these radio brands?
Wow! What can I say. The support from Clifton at PAC support was above and beyond. He "educated" the Car Toys tech, even giving us his cell phone number to connect with him so he could explain to the tech what he already should have known. Yes the On Star steering wheel button can be repurposed to the phone VERY EASILY despite everyone at car toys saying that it could not be done.thanks PAC !!!
I purchased this product along with an aftermarket stereo and installation kit for my Harley Road Glide. I have to admit the paper and website instructions were somewhat unclear or vague to me BUT this video nailed it! After reviewing the video a bit, I got it the first time. Thank you so much!
Earl Vinson i fucking agree this is the hardest pos i have tried to instal
In 50 seconds you resolve a problem thank you
Great video, however you need to make another called step 1 where you show how to wire the unit into the car.
However after reading the instructions a few times I was able to figure out the wiring for my Toyota Aurion (Camry). All good up and running.
I had an excruciating hard time with this install. At one point it felt like I was stuck in a desert with no water and nothing around for miles. Install was on an 03 Monte Carlo. I couldnt figure out how to program the buttons. "Seek by type" and "Preset" were missing from the programming sequence as I had installed a Kenwood HU.
Will the pac rp4 ch11 module work on the jensen vx 6020 on a 2005 grand cherokee?
where do you connect the wiring? thats why I dont get
I have a 2003 infiniti g35 & I'm trying to connect the swi-rc to my Dual xdvd210. can you tell me what I connect the blue/white wire (swc) from the swi-rc & where would I connect it to my Dual xdvd210?
Hi I am trying to install a swi x on this same car with same controls..Does the green wire connect to pin A7 at the factory wiring harness?? Also it says to connect pin A6 to a switched 12v. Do I need to cut the pin A6 wire and connect it??
I have a 6.2 inch rockville Dvd, bluetooth, GPS. I can't get the steering wheel controls to work. It will only either go up in volume or down, it won't do both. I have a 2008 Grand Caravan
Which steering wheel module do i need for 2005 dodge ram 1500?
I have a 2004 ford expedition and wana keep all the control that i have now for example ac fan spped vol up down do u carry any adapter for this
Hello.
Thank`s for your video.
I installed Pioneer to Chevy Trailblazer 2006 with PAC RP4-GM11. And I believe wiring was made proper by pro installers. But when it went to button mapping something went wrong. I did all the steps exactly the way you show in your video. Neither default mapping was right nor the programming attempt helped to solve the issue. I the end of the day i draw my Chevy away with total mess at steering wheel butеons: my Mute is missing preset - is the only button and it is on source select button track+ is on preset- and this is it.
I would greatly appreciate if you give me an idea on how to fix this.
PAC modules are SOOOO slow to respond to button presses. With the Axxess ASWC, the response is nearly instantaneous, just like it was with the factory radio with my 1998 Olds Regency.
does this wheel communicate wireless? Can I move it to my car and program there?
do you pres the button on the swc everytime you press the steering wheel button or only to skip the buttons that are not functional ?
Will this work for Renault Grand Scenic 2005 model???.
Does this also connect the bluetooth (hang up and answer) buttons on the steering wheel?
Thanks
I don't want to lose my phone operation pick up or end call on my clk320 wheel any help in this area ?
Will this work with a 2003 silverado bose? w/o onstar?
and a sony xplod head unit?
thanks
-C
i saw it worked for many brands but not sony, do you guys offer interfaces that work for sony head units?
Would this work with all car stereos?
Show how to hook up wires
will this work a honda crv 2009 and a JVC KWAV60BT.
"One time". Reminds me of the Fugees
Will I lose my settings if I disconnect my car's battery?
OKjumbo no you wont
What the hell is a "version" and how do you know which "version" to use? Are you talking about radio brands? If so this thing only supports about a dozen radios and they are NOT listed on the box. What if you don't have one of these radio brands?
how does that big dude even fit in the car??
no point if you don’t show how to wire the module
+saul morales
Its different for every car.
is that a grand prix??
I need a module for a mazda cx 7 2007 model
2008 suzuku grand vitara new radio install with SWI-RC interface
how do install it?
these wont work with bluetooth for the people who want to know.
just radio controls
This is the most co plicated pos i have atempted to install