Hyundai Elantra 2007 - 2010 Valve Cover Gasket replacement
Вставка
- Опубліковано 9 жов 2024
- This video gonna show how replace Valve Cover Gasket for 2007 2008 2009 2010 Hyundai Elantra and the OEM part number ...show how do the job in easy way in the home with simple tools ...i hope this video gonna help you ...if you like it just do subscript to our Channel .if it is helpful just give us like ..thanks
- Авто та транспорт
People watching this. DO NOT pry the edge of the valve cover up with a metal object like he does in the video. The metal on the engine is made of a high grade aluminum but it can still bend. If you pry with a metal tool you can bend the edge and cause a permanent leak. Also, DO NOT turn the dirty valve cover over above the open engine block and let the dirt fall in the engine. That will cause major problems.
Okay, then what would you use to pry it open?
@@monarrez1234 I used a thin strong plastic trim removal tool. I just pried slightly around the entire valve cover until it came off. Wasn't too hard. DO NOT use a metal object.
Martin is a 100%right it's a big No No to use a steel pry bar between surfaces especially as most of today's engines are alluminion heads block etc this kind of practise can do severe damage causing leaks etc
Also DO NOT pry the spark plug seals out like he did. Prying against the brittle plastic like that is a sure fire way to crack the cover. It's better to lightly tap them out from the other side. That way the force is spread across the entire valve cover. For more protection put the cover on a towel to keep from marking the outer edge.
Absolutely correct. The valve maker will only help a little, I'm glad you pointed this out. You will reblow your gasket because of the extra space. When machining parts you literally can't see a difference with a magnifying glass
Really appreciate the red arrows showing bolts
Absolutely great video. Even with an accent, more than easy to follow thank you.
Nice overview of the operation. Same cylinder in a 2010 blue model failed so it must be a design issue. The rtv in this case is a good touch.
Yeah lots of design issues with Elantra lol, like the weather stripping in side the dash, the third brake light, and the steering coupler
Thank you for this video, it was very helpful and informative to assist me with the same problem on my 2006 hyundai elantra.
Thanks so much for the help, a lot easier than I thought.
i guess Im quite randomly asking but do anyone know of a good website to watch newly released movies online?
@Dante Billy flixportal :D
@Micah Kairo Thank you, I went there and it seems to work =) Appreciate it!
@Dante Billy happy to help :D
For anyone else that watches this for some insight on how to do this job. Do NOT hit the valve cover. It's made of plastic and can easily crack. Instead use a small flathead screwdriver or pry bar to gently pry it off starting with the corners.
Secondly, use a paint scraper to clean the old RTV/silicone off, it should only be a small amount in a few spots. Then use a can or two of brake clean to clear away oil and grime. Be sure that you get the gasket surfaces as pristine as possible, this will ensure a good seal.
Thanks for the simple work well done ✅
Good work my Hyundai touring need same Gasquet
@4:40 mechanic starts hammering engine.
Me: "He's a real mechanic."
My wife: "What is it with you and hammers?"
Me: "No problem in world that can't be fixed with hammer. It's the man of the tools."
It's not a hammer it's a mallet
Went to replace my spark plugs at 110k miles and the same gasket went out, thanks.
Ha.....mine also. Same one at 94,000 miles
Very good
Hi friend , do you have to put any silicone seal on the gasket at all when install it back on ?
what are those parts you're pulling out in 7:03 does it come with the gasket cover ?
Spark plug tube seals and they should come with the kit.
what about the spark plugs? no need to remove them?
Gracias por tu ayuda maestro
I think I bent some heads or something when I busted the timing belt so at home fix should be like 200 for parts and 500-600 to get those heads machined but I havnt gotten them out yet, vs the 2300-3100 I was quoted at a few stores
Do you have to drain oil and coolant to change the valve cover? is it worth changing fuel injectors while at it?
I don't know how many miles you have in the car, but mine is 2008 Elantra 177K miles and injectors still working.
So do u glue it like the oil pan
Excellent
Man I tried this and right when I started the spark plug gasket just broke into pieces trying to pull it out. I had to put some gasket maker on It and say screw this if I wanna replace the valve cover gasket I got to replace the spark plug wires too because as of now the gasket on those are over with so I cant even do this until I replace those too
Fuhh, welcome to working on cars LOL. Every problem reveals or creates more problems.
Is this for the 2.0?
Super
How long does a job like this take the average mechanic?
A good one about an hour. A normal one. About 4...
انت عراقي
how do i find the parts number of my valve cover?
Supposed to be a guide or tutorial and I can’t see bc camera placement & hand blocking
شما اشوفك انته عراقي يا ابو الشباب
Hola amigo quisiera saber este tipo de vehículo dobla válvula
por supuesto carnal, es timing belt o correa. Pero si Dios, la ley, la vida, el destino, la suerte, lo que tu creas se rompe podrias salir bien 1000 en uno y no doblarse las valvulas. ves, todo puede suceder carnal/
Exact same oil leak on my 2010 Elantra BLUE
عبالك عراقي🌚