Leather Wrap Bracelet Tutorial (Single Wrap)
Вставка
- Опубліковано 29 вер 2024
- Kits are now available!! Please visit: www.mybeadkit.com to select from a variety of beautiful new kits we've created to go along with this video!!
Like our Facebook page: / mybeadkit and
/ ilikebeadsnthings
Thanks so much for your support! Stay tuned for new videos coming soon!!
Materials used in this single wrap bracelet project:
2 yards Size D beading nylon
Size 10 beading needle
28" 1.5mm leather cord
25 - 6mm Glass Beads (smaller wrists can use less; larger wrists require more)
2 - 4mm Pewter "starter & end" beads
Button
Wire Cutters
G-S Hypo Cement Glue
Upstate NY's Beading Destination Since 1968! Visit us in Pittsford, NY!
Handmade beaded jewelry by Beads 'N Things: www.beadsnthing...
Like us on Facebook for free Beading Photo Tutorials:
ilikebeadsnthings
Your video is the best I've seen yet. I have two questions 1 how do I stop a few beads from popping and 2 how do I start more string when I run out? Thanks in advance really like this tequinque
+Dawn Smith
Hi Dawn! By "popping", do you mean they are popping up out of the bracelet....or are they actually breaking? If they are popping up, it usually means they are fighting for space against the other beads so it may come down to your thread tension as you work. Sometimes you may need to loosen up the tension so the beads will naturally sit next to one another. If that doesn't work, you can just reinforce those beads that continue to pop up by running your needle and thread through them a second time to tighten them up between the leather.
If they beads are "popping" and actually breaking when you are running the needle through them, you will need to use a thinner needle and thread.
When you run out of string, you will need to "marry" new thread to your existing thread. This question has been asked before so I will copy and paste the instructions I've provided in the past right here:
If you are making a 3, 4, or 5 wrap bracelet, you will run out of thread. We provide enough thread in our beading kits to complete the bracelet, but at some point as you are working, you will find you are running out of the thread and need to add more thread.
Here is how I add thread when I start to run out while making a multi-wrap bracelet:
When I'm nearing the end of my thread, I snip off my needle making sure to leave at least 4" of that original thread to work with. Next, I thread my needle on a NEW piece of thread, centering the needle on the thread so that I can work with the thread doubled.
Then, I thread the needle through the last bead that I ended on making sure to go in the same direction as originally I added the bead (you have to hang on to the tails from the original thread so they don't get in the way as you do this)....so I'll draw my needle and NEW thread through that last bead (under both pieces of leather) pulling the thread through the bead to leave at least 4" of the NEW tails hanging out at the end.
I then go back through that bead (over both pieces of leather) and then I will add at least 3 new beads, just like normal, making sure all 4 if the tails don't get in the way. [Basically, you are reinforcing the bead that you ended on because you are passing through it a total of 4 times (twice with the original thread, and twice with the new thread).]
Adding at least 3 new beads helps create enough tension on that new thread, so when you tie knots, the thread won't pull out of the beads.
Now, you can "marry" the ORIGINAL 4" tails to the NEW 4" tails. I tie one original tail to one new tail into a surgeon's knot, and repeat that for the other 2 tails. The knots should sit next to the beads as close as you can possibly make them so that they can be "camouflaged".
Then, I glue the knots and wait until they are dry before I snip off all 4 pieces of tail.
If you find an easier way to add thread, by all means, do whatever works for you. I just wanted to share my process since I do not illustrate this in the video tutorial.
Thank you for getting right to it, rather than going ON AND ON about stuff we already know!!
Thank you so much for the feedback, Lynn! That was exactly my goal when I produced this tutorial (along with my others)!! I'm so glad you liked that method of getting right into the process.
Well it just seems to me that MOST people who are looking at HOW to make it, already HAVE the materials! So most of us DONT need a 20 minute tutorial on WIRE GAUGES or bead size! lol
What size button do you use and where do you get them? I don't need the whole kit. Thanks. ps. Anyone can chime in.
Any size from 16mm to 20mm will do.
The best video and easiest instructions I've seen so far - nice job; nice bracelet. I followed your video and feel like I finally have the perfect technique. Thanks.
Thank you so much, LJ! We really appreciate it!!
Awesome video! I am a newbie... what kind of needle is to be used? I am looking at the list of materials in the beginning of the video except I don't see it among them. Thank you in advance.
+Amber Carlson Hello Amber! I apologize for the delayed reply! In most cases, the needle depends on the size of the beads. We used a size 10 needle which worked well for the beads used in the tutorial. Sometimes we have to use smaller if the holes of the beads are smaller....or heavier to accommodate thicker thread if the holes of the beads are bigger.
Can I use E6000 instead of the glue u used
You sure can!
Thank you for helping me out with these good video. I finally can start my first bracelet! ; )
That's great, Anne! Let us know how it turns out! :-)
wow i was really struggling to understand the technique but it looks so easy based on your instructions, will try it out now and let ya know how did it go ;)
Hi Marja! Thank you so much for the feedback! Let us know how your bracelet turned out!! :-)
Beads N Things hey thanx for getting back to me. It turned out great, i made a triple wrap bracelet, the only thing i was struggling with was that i had to start the new thread about 3 times and I'm quite of struggling to hide and secure the ends for the old threads. Is there some kind of tip to do it properly and making secure the bracelet doesn't end up in pieces? :)
Marja Moller Hi Marja! Aaahh yes....adding new thread!! I'm sorry that we weren't able to cover this topic in the video being that it is only a single wrap - - but I plan to illustrate this in future videos!
So here's a summary: When I'm nearing the end of my thread, I snip off my needle making sure to leave at least 4" of that original thread to work with. Next, I will thread my needle on a NEW piece of thread, centering the needle on the thread so that I can work with the thread doubled.
Then, I will thread the needle through the last bead that I ended on in the same direction as originally I added it (you have to hang on to the tails from the original thread so they don't get in the way as you do this)....so I'll draw my needle and NEW thread through that last bead (under both pieces of leather) pulling the thread through the bead to leave at least 4" of the NEW tails hanging out at the end. I then go back through that bead over both pieces of leather and then I will add at least 3 new beads just like normal making sure all 4 of the tails don't in the way. Basically, you are reinforcing the bead that you ended on because you are passing through it a total of 4 times (twice with the original thread, and twice with the new thread).
Adding at least 3 new beads helps create enough tension on that new thread, so when you tie knots, the thread won't pull out of the beads. Now, you can "marry" the ORIGINAL 4" tails to the NEW 4" tails. I will tie one original tail to one new tail into a surgeon's knot, and repeat that for the other 2 tails. The knots should sit next to the beads as close as you can possibly make them so that they can be "camouflaged". Then, I glue the knots and wait until they are dry before I snip off all 4 pieces of tail.
I really hope this makes sense!! :-)
Nice work. I'm going to try it :-). Great video with clear easy to follow instructions.
Thank you for the positive feedback! We hope you had a chance to try this out!! :-)
This is the easiest how to!!!! I'm wondering if there is a way to tighten up at the end before we knot it?
Hi! Do you mean with the thread or with the leather?
I absolutely love your tutorials . They are always so clear and to the point. I enjoy making this bracelet but have a hard time with the thread being somewhat loose. I try to keep the tension as tight and consistent as possible. I use fire line could this be my problem? Could you give me some pointers on what to do to correct my problem? Thanks for the great tutorials.
Paula Binkley Wow! Thank you for the positive feedback, Paula! You've made my day!!! :-) Fireline is OK to use- - it is not my favorite but it certainly works. If you are using beads with a larger hole, you might want to use a heavier thread which will help keep better thread tension. If the bead holes are "normal" size, then my best suggestion is to tug nice and tight as you add each new bead. I tend to keep my tension very very tight as I know it will eventually loosen over time with wearing. I hope that helps!!
Best video ever !!!! Thank u sooooo much!!!!!
Fernanda Gonzales I'm so glad you like the video! :-)
Thank you for this video ! I recently ordered some UV color changing beads from ebay. While I wait for them, I was struggling to find a good, easy design to make. Your tutorial makes it looks super easy ! I'll leave out the glue part because I plan on using a thicker thread. Thanks again !
+Shyam Sundar Hi Shyam! Thanks so much for the feedback!!
One of the best videos i have seen on this type of bracelet. I am having trouble with my thread ending up too loose. I try to keep it tight throughout the process but in the end everything is still loose. Is there any suggestions for this or is it just me. Thank you for sharing .
Hi Paula! Thank you so much for your feedback. I always overemphasize the tension in my thread. I pull very tight (but no so tight to damage the leather/cord). If the holes in your beads are very large, you can use a heavier thread/cord with a larger needle. But if you are using beads with a standard or typical hole size, then give the thread a nice tight tug as you add each bead. When I teach the class in person, I notice some students are worried they might break the thread or the cord if they pull too tight, but I encourage them to keep things nice and tight since the bracelet will loosen up with wear. I hope that helps!!
I just got done making this bracelet. It turned out great, I love it!! Great teacher!!! :)
Thank you so much!! :-)
I really enjoyed this tutorial. Your voice is so easy to follow, so clear. Thank you for your videos and tutorials. They are awesome.
Thank you so much, Paula!! We appreciate your feedback!!! :-)
Fantastic tutorial - detailed and precise instructions paired with a great visual! Thank you! :)
Thank you, Trixi! So glad you liked it!!! :-)
Really good tutorial very easy to follow, now I just have to give it a go!!!
Thank you so much, Barbara! I hope you were able to make some bracelets since watching the tutorial! :-)
How thick is the nylon and what size is the needle. Having a hard time threading it.
+Johnna Geigert Hi Johnna: I apologize for the delayed reply. I'm just catching up to messages now. We used a size 10 needle with size D beading nylon for this tutorial. :-)
Best tutorial ever! great speaking voice, lighting and angles! Well done
Thank you for your wonderful feedback!! I really appreciate it very very much! :-)
Thank you, you explained this easier than any I've watched before
What size leather?
We like using 1.5mm leather but it really depends on the size beads you are using. If your beads are 8mm or larger, you might want to try using heavier leather (at least 2mm). If beads are 4mm or smaller, you may also use 1 mm leather. I hope that helps! :-)
What Lynn Tucker said and what size leather cord would I need?
Thanks so much, Sharon! We recommend 1.5mm leather. But ultimately, it depends on the size of the beads you use. Our kits on www.mybeadkit.com use 1.5mm.
Great
I JUST DID ONE OF THESE BRACELETS BUT USED GLOW IN THE DARK BEADS AND A SHANK BUTTON, IT TURNED OUT BEAUTIFULLY! I HAD MADE ONE USING CAT'S EYE BEADS, MY SISTER SAW IT AND WANTED TO BUY IT FROM ME, MADE SOME MONEY TO BUY MORE PRODUCT!!
Would E6000 glue work just as well as the hypo cement?
Lillian Russo Hi there! Yes! E6000 should work fine. You only need a dab so be careful not to overload with too much glue. You can use the end of a needle to apply just enough to cover the knot. :-)
Beads N Things Great! Thank you so much for the speedy reply. =D
Lillian Russo My pleasure!
Great Easy to Follow Video! Thanks!
Love it! muy bien explicado
Camille A Muchas gracias!! :-)
I made my first leather wrap bracelet threading the nylon using a figure eight and the beads are still a bit loose. It could be the size of the beads, I'm using skulls and round beads consecutively. This method seems like I can get a better tightness on the beads. I will attempt this one. Thank you for a great tutorial. =)
Hi Angelus: We tried the figure-8 method when we first started but found it really made no difference. It all came down to the thickness of the thread versus the size of the hole of the beads used.... AND most importantly, the amount of thread tension you maintain as you add beads is crucial. Let us know if you have any other questions! Thanks again!
good job, nice and clear so easy to follow---thx!
There are a million of these videos on UA-cam and yours is EASILY the best and clearest! Thanks so much for sharing and for the concise instructions and tips!
Hi Michelle! Thank you so very much for your feedback!!!
I have watched several videos on how to make these lovely bracelets and being a seamstress this looks the easiest! You diction and delivery were perfect in your instruction! Some videos I can watch because of music...ect. thank you
Thank you for the positive feedback!! So glad you like our video!! :-)
This video has the simplest way that I've seen so far, and clear instructions! I will try this soon :D
Thank you, Castiel! We really appreciate your positive feedback!! :-)