Hi. If you go to partzilla or rocky mountain they have an OEM Parts Look Up section. Find the part# there. Cut and past it in the search bar of eBay and see if there are any heads available? You can also verify your head is matching the part#. The old OEM Parts Diagrams can be wrong. I look at the eBay pics closely to be sure the head is identical to what is being replaced. My restos usually get total rebuilds even thou they will not ever get much use. If you need head work I have had good luck with Fast Heads in Utah 435 668 7776 @@iancameron198
Yamaha never used the #4 bolts on any of the 78-81 YZ's I have owned all the models-they used plane 10mm head bolts with only the lock washers press on-washers were separate.
Good job ,I have a 77 honda xr75 when i was a kid still have it.
Eagerly awaited this video and wasn't disappointed, the bike turned great, as they all do, 😎👍. Hope Chico's leg is OK.
The 1979 ignition covers fit-basically all the yz,gt,mx 80 covers fit.
Love your program and your voice :) Aww Chico and the man remember :) ahahhaajajaja
Chico is the man. Thank You
@@JTSCUSTOMSI have a 1974 ST90.looking for a recon head and jug.any way you can help .thanks
Hi. If you go to partzilla or rocky mountain they have an OEM Parts Look Up section. Find the part# there. Cut and past it in the search bar of eBay and see if there are any heads available? You can also verify your head is matching the part#. The old OEM Parts Diagrams can be wrong. I look at the eBay pics closely to be sure the head is identical to what is being replaced. My restos usually get total rebuilds even thou they will not ever get much use. If you need head work I have had good luck with Fast Heads in Utah 435 668 7776 @@iancameron198
repair the foam with sections of foam/contact cement, then wrap with a upholstery batting!!!
The 1979F model-and this 1980 G model share many parts-but the 1980 G tank was only used on the G model-maybe you were looking at the 79 Micro fiche
Yamaha never used the #4 bolts on any of the 78-81 YZ's I have owned all the models-they used plane 10mm head bolts with only the lock washers press on-washers were separate.
use a thin 3m duct tape on the pan edge-do not leave the old tape on.
Hey Bob. Do you have a heat shield for the exhaust pipe?
What did you do for gas without a tank? For your test?
Motion Pro makes a great little tank for running a bike without a tank
way too many bumps/lumps