You kick started a 700cc 2 stroke in skate shoes, while it was freezing cold out, AND with your left foot? You maniac! Props to you for not breaking your ankle.
@@apancher i grew up with Bultacos, Maicos, and 70s Husqvarnas. I always got off the bike and kicked it with my right foot. I'm just blown away this guy cold started a 700cc Maico. Maicos kick back insanely hard.
I wanna see a 1000cc 2stroke thumper with nitromethane style engine technology, capable of full maximum rpm and power. Then put it up against some 1000cc race bikes like R1 and CBR1000RR.
Nice work. The Engine was originaly engineered as a 620cc by Maico and then licensed to Zabel. Zabel slightly modified it and build a custom cylinder for it. This Engine is normally used for sidecar racing. Maico does also make a 698cc model. The same engines are also used in ATK Bikes
The Zabel engine is used for sidecar racing, but it's ultimately based on the Maico motocross engine. This was the last engine design by the old Maico company in 1983, shortly before they went bankrupt. The new Maico company never really found much success but did convert the engine to water cooling, added the larger 620cc and 685cc "700" versions over the original 490 size, and added a few other features like exhaust power-valves etc. Technically you can still buy a new Maico today with this engine. The original air-cooled 1983 engine was phenomenally good and most people I've talked to think it was better than any of the Kawasaki or Honda 500s that were being made nearly 20 years later.
Yo that's some dangerous shit how the throttle cable isnt even long enough to give it slack when you have the handlebar turned left.. Imagine if your trying to turn left and you forgot about the throttle and then the RPMs start climbing on you inadvertently... A true death trap lol.
@@mikkohakkola6084 That's the whole thing if you forget about it or you don't use the clutch the bike is going start lunging forward with all that massive 700cc torque haha.
Need to have a chain guide on the bottom for a reason. I learned that the hard way when my bolts came loose on the chain guide and caused all kinds of expensive havoc.
The engines that were used on the side cars / outfits had the output shaft on the other side so the passenger wasn't next to the chain in a race ect so they didnt loose fingers and so on.
A sidecar engine you say? 700cc Stock huh? Well that is a game changer. I've been sourcing, and building engines for decades. Never has the thought crossed my mind to start buying old sidecar 2 stroke. Being from Canada, I've never seen one IRL. I figured they were Stock 450's and 250's that were tunned and wrenched.. Great video, one day that will be a nice build. The concept is genious.
You need to lengten the cable on the Hot start, it pulls it open a bit when you steer to the left. Thats why the rpm’s go up when you turn the steer left
Did you know that you can actually buy a 700cc 2 stroke street legal in Europe? The sister of the Zabel 700, the Maico 700cc. It costs only around 10K ready to race. And it's fully designed to work with the power of the motor. Only 110 Kg of pure rage. The dealer is in Germany, you should check.
Somebody from Nitro Circus is going to get a hold of one of these and there's going to be some insanely high and long-distance jumps coming and hopefully nobody gets hurt real bad
I appreciate the effort, even though the most simple and easiest things were not done properly. Like throttle cable management and buying right sized rubber hose for air intake before starting the build. I know this was challenging and cool job but you should never cut the effort on easy parts of the job.
Better add side plates where shock mounts to swingarm... the shock will break the tab the way you have it.... Just add steel on the sides and match existing holes you have.
You kick started a 700cc 2 stroke in skate shoes, while it was freezing cold out, AND with your left foot?
You maniac! Props to you for not breaking your ankle.
I grew up with a 1980s KTM. Left side kicks are all I know!
@@apancher i grew up with Bultacos, Maicos, and 70s Husqvarnas. I always got off the bike and kicked it with my right foot. I'm just blown away this guy cold started a 700cc Maico. Maicos kick back insanely hard.
Penkittäkää se. Isoista 2tahtisista kuulee paljon tarinoita, mutta dyno lappua tai kulkua niistä ei ole vielä löytynyt.
Cant wait to see how it runs when the snow is gone! Awesome build guys
I see 700cc and 2 stroke in one sentence, and I click the video... lol simple as that
Pretty cool!
Nice bike and no black rims looks good
I WANT TO SEE ARTTU ON THIS BEAST !!!!
"it was cheap bike 2000 euros" and then there is me driving 700 euros derbi senda.
@Prison Mike Hah lmao
i also drive a 950 euro derbi senda but why are you comparing a 50cc with a 700cc😂
@@sjoerd6948 my cousin give me free derbi senda
Seems like a good starter bike
The smell inside the warehouse must be really good.
That frame is bolted to the engine, and not the other way around 😂
Bring back the 700cc 2 stroke beast 😎
Dyno that beast
mc empele , please
It's around 80hp
It prob have over a 100hp
@@micjubbs6430 Not that much
@@BenaresDarkness 250cc 2strokes have about 60hp so a 700cc will have some high power
I wanna see a 1000cc 2stroke thumper with nitromethane style engine technology, capable of full maximum rpm and power. Then put it up against some 1000cc race bikes like R1 and CBR1000RR.
Kaegis that would rip through all of them
Kaegis
Never gonna happen.. I would like to see a 4 cylinder 1000cc 2 stroke race bike. That’s possible
people: i got a 300cc two stroke supermoto, its such a beast!
stunt freaks team: very awsome very fast! also hold my beer
Du auch hier 😂
Nice work. The Engine was originaly engineered as a 620cc by Maico and then licensed to Zabel. Zabel slightly modified it and build a custom cylinder for it. This Engine is normally used for sidecar racing. Maico does also make a 698cc model. The same engines are also used in ATK Bikes
please keep this one i fucking love this bike i want to see this in more videos
This isn’t a bike.. this is a monster!
This thing drinks more gas than a plane
Gotta love the 2 stroke sound!!
The Zabel engine is used for sidecar racing, but it's ultimately based on the Maico motocross engine. This was the last engine design by the old Maico company in 1983, shortly before they went bankrupt. The new Maico company never really found much success but did convert the engine to water cooling, added the larger 620cc and 685cc "700" versions over the original 490 size, and added a few other features like exhaust power-valves etc. Technically you can still buy a new Maico today with this engine. The original air-cooled 1983 engine was phenomenally good and most people I've talked to think it was better than any of the Kawasaki or Honda 500s that were being made nearly 20 years later.
Thanks.
2 stroke or 4 stroke
2 stroke= *LIKE*
4 stroke= *COMMENT*
Aprilia rx 125
4 stroke❤️
4 stroke
@@Phil_Gear Aprilia rs 125 😂🤷🏾♂️
@@MarcN15 nice👍🏼💪🏼
4t
I cannot imagine kickstarting that
He did it with sneakers😳
@@Dumfan I know big respect to that dude idk how his foot is still intact
@@Dumfan and left foot
You should be proud, the bike looks and sounds pretty slick. Those LEDs really set it off.
Thank-you guys, it makes me happy to see such a "pure fun" project video.
Two wheels are BOSS.
Yo that's some dangerous shit how the throttle cable isnt even long enough to give it slack when you have the handlebar turned left.. Imagine if your trying to turn left and you forgot about the throttle and then the RPMs start climbing on you inadvertently... A true death trap lol.
You can always press clutch
@@mikkohakkola6084 That's the whole thing if you forget about it or you don't use the clutch the bike is going start lunging forward with all that massive 700cc torque haha.
@@RandomUsername81 well basically
I'm coming to Finland in October for the first time! I'm excited to meet your people!
that pipe looks GNARLY!
Let us see it rip already! No snow outside.. We've been waiting too long...are we just here to suffer?
you don't even need to give gas !!! ... the torque that has idle is enough to skate the wheel !! ... she's gorgeous.
PLEASE LET THE BIKE WARM UP
Thats how you warm em up, and i think that they warmed it up before they started recording...
That thing probably vibrates so hard that it feels lik u r being shocked lol vary awesome good work guys
That is why the project went so well. They always consider themselves finnish even before they get started.
This monster engine has a fk kickstart ???
Why not just put my leg down on a train rail
Is this a good starter bike?
very very good
Paul Dawson r/ wooooshh
@@jardimmanuelpijpker9781 Oh wow, cool. You use reddit. Congratulations!
😂😂😂
Those wheels are Awesome !! 😍💯🏁✌
Need to have a chain guide on the bottom for a reason. I learned that the hard way when my bolts came loose on the chain guide and caused all kinds of expensive havoc.
Not sure where you guys are located, but here in Chattanooga Tennessee in the USA, the TardSquad definitely approves of this build!! Great job guys.
bubbzification finland!!
Other side of the world.
Love the build.
The engines that were used on the side cars / outfits had the output shaft on the other side so the passenger wasn't next to the chain in a race ect so they didnt loose fingers and so on.
First Finland gave us The Dudesons, and now this! Thank you Finland 🇫🇮 ❤️
brave man kicking a 700 with no boots like
"Bling bling motherf*cker" I love it😁
I’m 8 years old an weigh 56 pounds is this a good starter bike
Fruity Wubbs it’s too weak
Nah, try with the turbo busa
No no no !!!! Try whit a ninja 6r.......
No gxr
noo its too powerful try with a h2r its perfect
big bikes are hard enough to start, but swapping to kicking on my left. i probably couldn't do it XD
Great bike lads. You both did a fantastic job just in two days. Just love the neon lights on the wheels.
A sidecar engine you say? 700cc Stock huh? Well that is a game changer.
I've been sourcing, and building engines for decades. Never has the thought crossed my mind to start buying old sidecar 2 stroke.
Being from Canada, I've never seen one IRL. I figured they were Stock 450's and 250's that were tunned and wrenched..
Great video, one day that will be a nice build. The concept is genious.
get a cr500, that thing will shake your teeth out haha
@@stevenwhillans8 yes, because we haven't done that yet... also. Cr500s are 500cc, not 700cc. Thanks..
OMG AWESOME
Eh ada bang gondes..
Great beginner bike
Imagine that kick start smacking your leg
what leg
Your leg*
Good beginner bike?
Totally
Yeah if you're suicidal!
Yeah, really easy to control
Id say one of these or a busa would make a great beginner bike
zabel engines are indeed made for sidecarcross. 700cc on one cilinder, makes around 80 hp i believe. powerful stuff.
Can you try the top speed of it?
Yes when the snow melts
Never clicked on a video so fast
To buy one of these made brand new from Germany they are 17950 euros. With a zabel 700.
where can i buy them?
@@oliverrosenkrantz7603 you can buy them here www.maico-bikeworld.de/
Oh yeah the maico I know.. I thought you meant a build like in the video :) but thanks
@@oliverrosenkrantz7603 it's the same thing as in the video! You could buy a motor and build one yourself!
ye but maico has nothing to do with zabel
I like that custom automatic throttle when you turn the bars!!
Starts a fucking 700cc with running shoes on what the fuck hahaha
And left foot😂
yep you dont need some random extra gear its fucking useless
Did anyone else see the bolt drop out the bottom at 5:04
And at 5:20 you can see him riding over it.
8:42 slowed at 0.25 is wonderfull
Anyone else see the BOLT FALL OFF and then get runover. You guys should find where that came from 5:03
yeah it fired sparks when he went over it lol
Should see if Lectron will build you guys a custom carb for that thing to keep her running mint 👌🏻
You need to lengten the cable on the Hot start, it pulls it open a bit when you steer to the left. Thats why the rpm’s go up when you turn the steer left
700cc wow, that’s gonna hammer hard.
Its got that cool option where the engine revs up when you turn the handlebars lol.
Matt Sloop my old Kawasaki 85 did that it was terrible
Poliisi: Onko tätä viritetty
Jonne: Pikku parannuksia
Poliisi: Haeppa kypärä
Poliisi 2: *Hakee kypärän*
Poliisi: *Käynnistää mopon painaa kaasua ja mopo lähtee perseen alta*
Jonne: Voi vittu
"kurit otettu pois"
joo tota se kaasu on todella herkkä niin..
Välit vaihdettu. Tutkaan 150. Poliisi se olis suoraan vankilaan. Ne on nuo ledit jotka tuo tehoa
You booze!
You cruise!
You win!
Congrats for the project man! I love supermotos, and this one looks awesome! Good luck with the tests with the bike!
sounds amazing guys !
Cool but are you guys ever making a rotary powered bike.
@@BMW-E36 well I wasn't being serious but if Norton did it, it should be possible
@@BMW-E36 snow sled engine
@@BMW-E36 holy shit the 14 year old has got something to say, let's hear it
best starter bike😂
This engine is just huuuuuge torquemonster!!!
Holy shit this looks insane! sounds and looks really nice to
On UA-cam it sounds like a loud scooter, but I know it sounds like a beast when we are right to it…
Wheels look shit unless you are a 12 year old girl.
whats next? 1000cc 2 stroke? what a beast this one is!
That sounds terrifying
I hope so lmao
I heard that some one is making a 900cc sigle cylinder 2stroke
There is a cr1000
Please more videos of this beast!!!
Imagine a launch at max rpms withouth any kind of control
Fuckin stationary backflips
Try it on the dyno
Did you know that you can actually buy a 700cc 2 stroke street legal in Europe? The sister of the Zabel 700, the Maico 700cc. It costs only around 10K ready to race.
And it's fully designed to work with the power of the motor. Only 110 Kg of pure rage. The dealer is in Germany, you should check.
It costs alot to get one to Finland
Spodziewałem się eksplozji magazynu fajerwerek a pokazujecie pikolaki... Trzy razy na nie, dziękujemy następny prosze.
Dokładnie :/
odmianów się naucz
Wanted to point out that the tire leds are kitsch, but they do look nice when the bike is running. pretty sure its a fun bike.
Suomen tehokkain derbi
Onse
Manki jättelee 🙄
0:58 damn put a chain guard on it bro
benny smaller the chain Guard is bolted to the engine but this engine doesn’t have the holes for it
Not sure what sounds better, the bike or their accent lol!
TRC facts😂😂
Somewhat redeemed yourselves with those goggles I've NEVER seen before nice!
Somebody from Nitro Circus is going to get a hold of one of these and there's going to be some insanely high and long-distance jumps coming and hopefully nobody gets hurt real bad
Beast from Satan's dungeon
Guys before i even watch this... Please please please could you look into doing a 2 cylinder 500cc 2 stroke. Okay i'm watching now.
CR500!
Any masculinity you had left with those lighted wheels....
What
Lighted wheels =gay🤷♂️
What
@@jasonwick3257 you=gay
That’s a hell of a con pipe she’s a beauty keep it going 💯💪🏿 Nice rims
This sounds so amazing 😍
I need one to go to work every morning
More smoke coming out the exhaust than the tires lol
Legends say it can't power wheelie
yeah... because it spins the back wheel instead
I appreciate the effort, even though the most simple and easiest things were not done properly. Like throttle cable management and buying right sized rubber hose for air intake before starting the build. I know this was challenging and cool job but you should never cut the effort on easy parts of the job.
there is no need to tell them this at this point, they allready learned 😂
Nice 2T sound brother!!!
Wait till it blows up
We worked TWO whole days on this "build" watch us break it in TWO whole minutes before it even gets 5 feet out of the shop.
Simson driver : thats to easy for me
My 50cc is faster
@@dreieinhalbeck doubt it😂 I have an 80cc derbi and it’s not even close haha
@@hmmallo_2477 it's a Simson joke.
Great job guys! Ciao from Italy
Better add side plates where shock mounts to swingarm... the shock will break the tab the way you have it.... Just add steel on the sides and match existing holes you have.
That is terrifying oh my god