1938 Ford Cabriolet - Part 10: Tunnel and Front Floors
Вставка
- Опубліковано 8 вер 2024
- Creating the tunnel over the driveshaft and fabricating a front floor under the dash out of sheet metal.
- Using a slip roll machine to curve sheet metal to give clearance and cover the drive shaft.
- Cutting and cleaning parts of the original floor to give good area to weld to.
- Using the power hammer and shrinker to form panels to cover the transmission.
- Welding together all the shaped panels and then welding them to the existing floor of the car.
- Using a hydraulic hole punch to cut holes out of the panels for the automatic transmission pedal set up and bead rolling those panels before bolting them down under the feet and pedals.
he says, "nobody is gonna see that, but I'm gonna see that." that's the work ethic, that makes him successful.
I wish I were 40 years younger and serving an apprenticeship under Mike's tutelage. This very talented man is what custom old school car building is all about.
Same
I love the fact he never Bad Chads his builds only Primo.
To say' a work of art, can not begin to do justice. Thank you for posting such .... beauty.
Man, YOU are one TALENTED DUDE!!!!!!! I'm from Calgary, Alberta, Canada and I discovered your channel recently .... AND I love your sense of humour!!
If you EVER need a CANADIAN Helper..... I would love to work with you! Zach
Yeah that tunnel looked like a pain, all that hammering badass
Just found the channel man you guys are killing it! You deserve more subs!
Thank you brother
Awesome metal work and I subscribed
Thank you for your support homie
" This is the way I do it" perfect quote from a true customizer.
You amaze me how easy you make it look . For you it’s like no problem chop here there remove this lol absolute talent unbelievable. And seen your other videos . Your quality of work is top notch . Clean welds and you even smooth out the metal getting it straight and clean . I’ve seen other shops that weld layers of metal on top of each other then Bondi it all up . Quality work keep it up love the videos .
Thanks homie a lot of jale goes into these ranflas
Now that's what you call makin a silk purse out of a sow's ear. Great work Mike!
AMAZING Skills and Personality!!! I would love to own something built by you. I'm a new FAN.
Thanks homie! 👊
Pinche jale con madres! Great job carnal!! I always learn a new trick from the videos! Keep sharing the knowledge. 👍🏽👍🏽
Chingon holmes. Thanks for watching
GLAD I FOUND THE CHANNEL !! YOUR TALENT IS AMAZING TO SAY THE LEAST! AWESOME!!!!!!!!!!!!!!!!
Legend has it he kept cutting. He reached the trunk by morning 🤣😂
I am South Africa and I am loving this!
Air belt hand sanders more safe. Your bad ass thank you for showing us very educational keep up the good work your work will be known for hundreds of years👍
A total joy to watch. How cool would it be to apprentice under you. Such a character.
Another great episode!!! Happy 4th of July to all!
Acording to your caculation, your imagination is not a halucination, but a fabrication of a fine classic machine by yours truly Bello"s.
Thanks homie, that was poetic!
That ,,,,,, was amazing.
Watching you work never gets old, I see the metal move jefe, estoy gettin old and more lokachon homie
Gracias carnal
The dopest Vato in the game and you show step by step for foos that wanna learn and are trying to keep the kustom locochon scene going , you the man holmes !!! Tell carapila qvo
Orale homie, just passing down the knowledge. Vatos like you is what keeps us going 😎
Stumbled on your channel, GREAT metal work man!! Love it, subscribed!
Clean floor work...
Yo, that fuckin piece he made to cover the tranny and shifter is art. Great job, homie. I think I need you to bless my project with your creativity. I'll hit you up soon.
like always first class work
differentiated services. Happy birthday. Brazil
You had that floor figured out the whole time
Just wow. Awesome sauce even.
Said it is what it is. Shit looking good to me.
Good job, I was scratching my head thinking how the fuck are you going to make that piece, I have hope for myself now, and don’t worry about the finger, you got 9 more!!
Lol the fingers alright. That tunnel did kick my ass
Incredibly skilled and incredible work rate 👏 👌
Always firme to see updates homie !!!! Best channel on here carnal ...handle it
Damn bro! You got some skills!!! Awesome work!!! Orale!!!
Clearly, you're not afraid Holmes!
good job ;-)
Another killer episode!
Right hand dive cab.. too sic homie
Nice work. #STAYSAFE #PHILLYPHILLY 🇺🇸
Much love for the Philly homies!
You do some great work
Ensenale a alguien para que no se pierda tu craftmanship
I just realized this car is right hand drive
You guys are not only funny but I love your old school style, you got likes and Im subscribed.
A arte em metal ✌️🇧🇷👏👏👏
Este ya lo mi hno quedo poderoso
You can tell that shit was pissin you off.. Didnt even get a "Cheooooowwwwwww" out of ya
Yeah that day was a lil cold. Right here in Cali when it gets cold it puts you in a bad mood 😂
Look at that just like down town ...
U Mass Chingon bro good fabing..
To Mr bellows I have a 1959 Buick Electra not to 225 if I have the money to do whatever with it I would give you a call but I'm busted but I still have the car love watching your show learn a lot
Chingoling homie shout out from the east coast slums homie PHILTHADEL
Right on! 👊
Homie is in his zone, hits the ground running and gets $h!t done!
You know your meta !!..
Волшебник,Мастер супер 👍👍👍👍👍💯👏👌
Badass worker
So much craftsmanship badass
Thanks homie!
And it's all original numbers matching 401 nailhead
nice
Dude, I know your vid is like 3 years old, but I just needed to give you a suggestion... Did you ever get yourself an electric shear? It would save you alot of time over tin snips. No need to straighten waves and stuff that the tin snips leave behind. And you save yourself alot of muscle pain when you need to do many cuts as when you need to adjust for a better fit. Just a suggestion. 😉
Roger better be giving up them cheeks..😆😆
Lol that's fuckin funny
Hay Mike Isn't Sheet Metal Too Close To Transmission Noise/Vibration ? According To My Calculation Toooooooooo Close
Oh' I Thought Some One Forgot To Push Correct Button For Viewing Video
Awwwwe Shit Dogggg Been Waiting On This One Homie. Gonna Smoke Some Marijuana An Kick Ittt. 👊🏽
Firme! Have a good one homie
Absolutely masterful
hoping I'd get to see you put the boot ring chimney on it or "console" as they call it.. lol .. did you make it a level flat top where the boot ring bolts on or does it wrap around the tunnel? very fookin cool tho the ribbing for added integrity beefing the metal up is tops, way better than what was there before but honestly the owner should have had you do the entire floor pan, cough up the cash and do it.. install inspection plates so forth where you cut holes, weep hole divots the works, perfectly sealed pan.. still a huge improvement now the carpet will look right but from below its going to look wrong, with new on old..
wen is bellos music plyalist coming out and were can i buy a bello shirt?
Kabunga !
So where is this done, The vehicle he is pitting the floor in, is clearly Right hand drive?
What's the hole punch on the hydraulic pump, never seen that one
Whoever pissed in his Cheertos needs to slip him some good weed and a bottle and...apologize.
I would love a reply from you thank you very much
👍🏻😎
Done the right way. Overlap is no good. Moisture will settle in and rot out again
What gauge metal do you use to patch in the floor ?
10
I was about to ask this question, what thickness gauge is being used on the floor? Thanks for asking and answering too.
Hay Mike Why Is The Steering Column Right Side Of Vehicle 25:-/26:00 Time
It’s a Right Hand Dr., Homie
VATO gets down 👍🏽
Chingon cavaron
Mike whats up yo how many hours do you think you had in that tunnel it turned out good....keep putting videos out bro.....you the man
Thanks homie. Took about 12 hours
The original right hand floorboard had two holes because one was for the clutch pedal. Automatic? No need for a clutch pedal...
It needs Hood repair rear quarter repair both sides new floors new trunk and everything else Chrome redone lot of Chrome lot of dents have interior it probably needs to be redone too a lot of work
Volante a la derecha? Ese no es americano..
It just fitting sheet metal try doing aluminum he would probably cry
Aluminum is easier to me. Its a lot softer
Too many commercials!! Just when I’m getting into it …a damn commercial!! Got to get the cheddar but come on!!
Sometimes it's less work to cut all the bullshit out start over
better go get some alcohol on that wound... :-)
You lost me with all your F bombs. Your too good to talk like that.
As far as rust it's an ugly car really ugly