Handbrake Adjustment - Nissan Micra K12

How to adjust the handbrake (parking brake) on a 2003 to 2010 Nissan Micra k12. This adjustment is just for the handbrake lever as the cables can stretch over time. However, if your handbrake rises too high, don’t assume that the issue is caused by the cables stretching. There could be other issues causing the excessive lever travel, such as a broken anchor point or, more likely, a problem with the brake shoe self-adjusting mechanism. Always check the rear brakes first before adjusting the handbrake cable. If you’re in any doubt, take the car to to a qualified mechanic or Nissan specialist. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@biohazardousBiker]

Straight to the point, accurate, safe. Thanks for the vid

[@screwsnutsandbolts]

Thanks for watching !

[@davebolowski7925]

Really useful! Love your style of vids; cool, to the point and show everything. Keep going, you’re a natural 👍👍

[@screwsnutsandbolts]

Thank you! Will do!

[@antonyweaver357]

Great video!
Clear, simple and exactly what I was looking for.
Thank you for your efforts…
🙏👍👏

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@markwilliams2830]

Thank you. Useful to know this procedure

[@screwsnutsandbolts]

You're welcome! :)

[@Ispravnicul82]

Very interesting, thank you!

[@screwsnutsandbolts]

You're welcome, thanks for watching

[@guillaumelavoie1544]

Thanks for the guide and great work with the camera angle! Question, Is the motor running?

[@screwsnutsandbolts]

You're welcome. The engine was running in the footage where I was pressing the brake pedal but it doesn't need to be

[@ntamichael9343]

Great job bruh!

[@screwsnutsandbolts]

Thank you !

[@alexandruduta8102]

[@robe006]

Great video!
I have a Micra K12 with rear drum brakes. The handbrake works on the driver side (left) but not on the passenger side (right). The wheel just spins quite easily, not as easy as with no handbrake though. What could be the problem and how to adjust it? Thank you! :)

[@rockybalboa2484]

it's enough to just reduce a bit the excursion of lever . no need to check wheels if the brakes are not new

[@shaagealgareb9189]

thank you

[@screwsnutsandbolts]

You're welcome

[@malvasia17]

you are amazing!!! can you please make a video for the removal and install new tail door lock? Mine is not working well and produce noise in the cabin

[@screwsnutsandbolts]

Thank you, I'll be doing that soon

[@saboorsaboor704]

Thanks for the video. My 2015 nissan micra handbrake has very little resistance when I pull it up and it doesn't engage the brakes to stop the car from moving
Brake cables are in good condation. Can I try your method without jacking up the rear wheels? What you think can be the issue in my case? Thank you

[@screwsnutsandbolts]

Does it have drum or disk rear brakes ?

[@saboorsaboor704]

@@screwsnutsandbolts drum

[@screwsnutsandbolts]

It could be a few different issues. You'll probably need to take the drums off and see what's happening in there when you pull the handbrake.

[@saboorsaboor704]

@@screwsnutsandbolts thank you very much. I attempted to take the drum out but it refuses to come out, rusted. Dont know how to take if off. Hammered it a few times to no avail.

[@thunderbirdshane]

@@saboorsaboor704 You have to remove the dust cover and 30mm bolt

[@Louis.P1314]

Is this suit for every car handbrake adjust?

[@screwsnutsandbolts]

No a lot of cars have a different method to this

[@superjamesbond69]

that hand brakes is too high

[@MrPiligrim71]

This car requires dry cleaning😏

[@alialrubarma]

[@screwsnutsandbolts]

Thanks !